FILM/BAGS WASTE PLASTIC RECYCLING MACHINE: KCR-65
产品分类 : 按应用分类的回收生产线
The KCR-65 is a film/bag waste plastic recycling machine that crushes and reprocesses HDPE, LDPE, and LLDPE film or bags, converting the waste into pellets at an output of 35-50 kgs / hr.A 15 HP crusher and 2 HP spiral-type hopper feeding device convey the material into a single-degasification Ø 65 mm screw with a 24:1 L/D ratio, heated at 13.5 kw across 3 auto thermo zones and driven by an AC 20 hp inverter motor. The melt passes through a spaghetti-type die (3.5 kw heater, 1 zone) with a manual screen changer, then a water-cooling system and a pellet cutter with a 1 HP cutting machine motor and 3 HP cutter motor.Model: KCR-65Suitable material: HDPE/LDPE/LLDPEOutput: 35-50 kgs / hrCrusher: 15 HPScrew diameter: Ø 65 mm, L/D ratio 24:1Heating capacity: 13.5 kw, 3 zoneDriving motor: AC 20 hp + InverterDie type: Spaghetti TypeCooling system: Water Cooling
自动熔体过滤器 - FIMIC
产品分类 : 按应用分类的回收生产线
过滤器收集到的所有污染物均由两个刀片从其表面刮下,然后由刀片支架收集。最后,收获的任何东西都会自动通过前阀弹出。 另一个重要功能是可以在触摸屏上轻按几下即可确定压力设定点(在压力模式下),这样一旦达到此水平,刀片架(以可调速度运行)将继续收集污染,仅在整个周期内打开前阀。在特别污染的输入材料的情况下,不能将过滤器设置为连续模式:刀片保持器将继续刮擦,同时依靠临时的阀门开口根据需要进行排放。
RAS UP 800
产品分类 : 按应用分类的回收生产线
FIMIC’s latest innovations are aimed to address the current challenges in the plastics recycling industry. RAS 800 is the new addition to the automatic self-cleaning melt filters models produced by FIMIC, its increased filtration surface (4775cm2) allows recyclers to reach a higher hourly production capacity with the efficiency and simplicity characteristic of FIMIC’s filtration technology.
自动熔体过滤器 - FIMIC
产品分类 : 塑料制粒生产线
使 FIMIC 技术在回收领域享有盛誉的熔体过滤器,增强了反吹工作的可能性。 RAS+REF 熔体过滤器实际上可以以两种不同的方式运行:刮擦模式或反吹模式,为希望使用网状过滤器处理材料的任何人提供更多选择。因此,REF 是具有出色最终结果的网格处理的理想选择。
高输出自动熔体过滤器 - FIMIC
产品分类 : 塑料制粒生产线
GEM系列结合了FIMIC的经典自动清洗式过滤系统RAS系列,及双层过滤系统ERA系列两个卸料阀的优点。 GEM系列在一个机体内安装两个RAS 600换网,两个网面刮料刀,及两个卸料阀,达到一机最大换网面积5600cm2 ! GEM系列是目前市场上拥有最大换网面积的过滤器。强效,只有FIMIC做得到!
自动熔体过滤器,用于高污染 - FIMIC
产品分类 : 塑料制粒生产线
FIMIC特别设计两层换网在一组过滤系统ERA内。这两个换网带有独立的流道,独立的两层换网。虽然在同一个主体里,但是带脏污的塑胶料流动不影响各自的流道和网面。 第一层网面先除去大部分的杂质,第二层网面将做更精细的处理,确保制造出来的塑胶颗粒拥有高品质。 第一层网面可以使用冲孔式网面(400~2000 micron)以节省成本,第二层网面再使用雷射刻制网面(100~300micron)。如此确保过滤过程完整,且大大节省换网配件的使用成本!
连续式皮带换网器 - FIMIC
产品分类 : 塑料制粒生产线
TEN系列连续式自动过滤网的网面,连细小的杂质都不放过。此网面坚硬,可适应处理废料时不同的温度设定,不因为温度不同而降低过滤品质。 网面表面附带一个刮刀,去除杂质的同时也将杂质收集起来,此举能保护网面在更换时,不致断裂。 网面总面积1.465cm2 , 降低网面压力,减低熔体过度加热的机率。换网的速度随设定的压力值自动改变。 网面的密度依照您的需求做客制,最小的网面密度是80 micron /170mesh。 开启此过滤器也不需要太多的技巧,让操作更简单一直是FIMIC的设计宗旨。 FIMIC附上一个气压式螺丝起子让用户更容易保养维护此过滤器。
塑膠廢料回收機 KCR-150
产品分类 : 按应用分类的回收生产线
康乔坚持只采用高等质的配备零件,诸如主机轴承皆采瑞典 SKF ,电磁开关皆采法国 TELEMECANIQUE ,且每台吹膜机皆附有计米器及累时器,主押出机的齿轮都经研磨,故稳定性高又静音。多样机型、多项配件选择,康乔工业就是能满足客户需求的专业塑料袋整厂设备输出的供应制造厂商。
PE Stretch Casting Film Extrusion Machine
产品分类 : 流延膜挤出生产线
T-Die Extruder machine can produce waterproof PE film for baby diaper, sanitary napkin, folders, table cloths, medical film, etc. Film thickness 0.03~1 mm Equipped with a fully automatic winder with cutting and changing rolls functions Hydraulic screen changer for short maintenance stop We didn’t show all our models, please don’t hesitate to contact us for bigger extruders.
PVA Water Soluble Blown Film Machine - GF-AV35.45
产品分类 : 吹膜挤出机
The GF-AV35.45 listing covers JANDI'S PVA water soluble blown film machines in two extruder sizes, which differ in extruder diameter and maximum film width. Both process PVA based water soluble, compostable and biodegradable compounds into tubular film for water soluble bags and packaging. Each machine is supplied with an extruder, a blown film die, an air ring, a take-up tower and a winder. Options are an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. The showroom specification table lists the film width and extruder size of each model; details are available with quotation and specifications can be changed on request. Type: PVA water soluble blown film machine, GF-AV35.45 listing Models: two extruder sizes, listed in the specification table Material: PVA based water soluble, compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model in the specification table
PLA/ PBAT Blown Film Machine
产品分类 : 吹膜挤出机
The PLA/PBAT Blown Film Machine (GF-LB Series) is a blown film line configured for compostable and biodegradable resins based on PLA and PBAT. It produces tubular film from these compounds for downstream bag making, in the same way that JANDI'S GF-L series does for conventional polyethylene, and is listed in the showroom specification table as the GF-LB Series with film width and extruder size selected per model. The line is built from an extruder, a blown film die, an air ring, a take-up tower and a winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. Film width, output and configuration are confirmed with the buyer at quotation; the specification table below lists the series range. Type: single-layer blown film machine, GF-LB Series Material: PLA/PBAT based compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model, confirmed at quotation
高速染色造粒机整厂设备
产品分类 : 造粒与混炼生产线
适用加纤色母造粒, HDPE, LDPE, LLDPE, PP, PMMA, ABS, PC, PS, 尼龙……等螺杆特别设计换料容易操作简易机器支架强韧客制化模头
AUXILIARY EQUIPMENT
This range of auxiliary equipment supports plastic film extruders and extrusion lines, covering the take-up, winding, and screen-changing stages of the process.The line-up includes a roller-type bubble guide bracket, a waste collecting winder with a gear box direct-connected to the main motor, a horizontal type winder and semi-auto winders (unit 1 and unit 2), and a choice of manual, horizontal, or pneumatic screen changers, along with a rotating die option.Bubble guide bracket: roller typeWaste collecting winder: gear box direct connect to main motorWinder options: horizontal type winder, semi-auto winder unit (1) and unit (2)Screen changer options: manual screen changer, horizontal screen changer, pneumatic screen changerDie option: rotating die
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-120
产品分类 : 按应用分类的回收生产线
The KCR-120 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 200-300 kgs / hr.Waste is crushed by a 30 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 120 mm screw (L/D ratio 30:1) heated at 80.8 kw across 7 zones and driven by an AC 100 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with a 2 HP pump, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-120Suitable material: HDPE/LDPE/LLDPEOutput: 200-300 kgs / hrCrusher: 30 HPScrew diameter: Ø 120 mm, L/D ratio 30:1Heating capacity: 80.8 kw, 7 zoneDriving motor: AC 100 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
Spaghetti Type Recycling Machine(GSR Series)
产品分类 : 按应用分类的回收生产线
The GSR Series is JANDI'S water cooling, spaghetti type recycling machine for polyethylene and polypropylene film scrap. Film is fed by a spiral feeder into the extruder, and the melt is extruded through a spaghetti type die head into strands; the strands are cooled in a stainless steel water tank, dried by a blower and cut into pellets by a pull and cutting unit with a rotary cutter and fixed blade. A screen changer driven by an AC motor with reducer filters the melt ahead of the die.The series covers a range of extruder sizes and motor ratings so that capacity can be matched to the scrap volume of a film or bag plant; the figures for each model are listed per model in JANDI'S GSR specification table. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen and an air blower with storage tank. Details are available with quotation.Type: water cooling, spaghetti type recycling machine, GSR SeriesMaterial: HD/LD/LLDPE and PP film scrapSpiral feeder into the extruderScreen changer driven by AC motor with reducerSpaghetti type die head, stainless steel water tank and blowerPull and cutting unit with rotary cutter and fixed bladeOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, hydraulic screen changer, second extruder, vibrating screenExtruder size and capacity per model, confirmed at quotation
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-85
产品分类 : 按应用分类的回收生产线
The KCR-85 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 80-120 kgs / hr.Waste is crushed by a 15 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 85 mm screw (L/D ratio 30:1) heated at 45.6 kw across 5 zones and driven by an AC 40 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with 2 HP x 2 pumps, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-85Suitable material: HDPE/LDPE/LLDPEOutput: 80-120 kgs / hrCrusher: 15 HPScrew diameter: Ø 85 mm, L/D ratio 30:1Heating capacity: 45.6 kw, 5 zoneDriving motor: AC 40 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
Die Face Cutting Type Recycling Machine(GHR Series)
产品分类 : 按应用分类的回收生产线
The GHR series is a die face cutting type plastic film recycling machine for HD, LD and LLDPE and P.P. film scrap, producing pellets that can go back into the extruder. Scrap is fed into a stainless steel densifying tank with rotary cutters, then extruded through a hydraulic screen changer and cut at the die face; the pellets are dried in a stainless steel centrifuge unit and collected in a stainless steel storage unit. The series covers extruder sizes of 65 mm, 85 mm, 100 mm and 120 mm.Motors with inverter are 50 HP, 75 HP, 100 HP and 125 HP across the four sizes, for maximum capacities of 120 KG/HR, 200 KG/HR, 300 KG/HR and 400 KG/HR. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, second extruder, film roll feeder and vibrating screen. JANDI'S notes that adding a crusher makes it easier to handle scrap of different sizes such as loose film and die-cut waste, gives a more even temperature in the densifying stage, and results in more stable feeding, more stable extrusion output and more uniform pellet sizes.Type: die face cutting type plastic film recycling machineMaterial: HD/LD/LLDPE & P.P.Models: GHR65E, GHR-85E, GHR-100E, GHR-120E; extruder 65 mm, 85 mm, 100 mm, 120 mmMotor with inverter: 50 HP, 75 HP, 100 HP, 125 HPMax. capacity: 120 KG/HR, 200 KG/HR, 300 KG/HR, 400 KG/HRDensifying tank with rotary cutters, hydraulic screen changer, centrifuge drying unit and storage unit in stainless steelOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, 2nd extruder, film roll feeder, vibrating screen
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-100
产品分类 : 按应用分类的回收生产线
The KCR-100 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 80-200 kgs / hr.Waste is crushed by a 15 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 100 mm screw (L/D ratio 30:1) heated at 71.7 kw across 6 zones and driven by an AC 60 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with 2 HP x 2 pumps, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-100Suitable material: HDPE/LDPE/LLDPEOutput: 80-200 kgs / hrCrusher: 15 HPScrew diameter: Ø 100 mm, L/D ratio 30:1Heating capacity: 71.7 kw, 6 zoneDriving motor: AC 60 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
Rigid Sheet Extrusion Line
产品分类 : 片材与板材挤出生产线
1. Extruder is driven by AC Inverter duty motor, with excellent efficiency and lowest power consumption. 2. Extruder hopper with low-level sensor work with auto-feeder will keep material in stable supply. 3. Hydraulic driven screen changer avoid any particle goes to melting pump & flat-die. 4. Melting pump with accurate rotation control, keeps the material flow stable. 5. Extruder & melting pump speed is working on pressure synchronized controlling system.
B2B Food Grade Cleaning System with Modular Design
产品分类 : 清洗与分选产线
China Factory Price 500–6,000 kg/h Food-Safe Plastic Recycling Equipment Our food grade pet bottle washing recycling line is designed for efficient,hygienic,and high-capacity processing of post-industrial and post-consumer plastic waste.With output capacities from 500 to 6,000 kg/h,the B2B food grade cleaning system can be configured for recycling PET,HDPE,PP,and other compatible thermoplastics used in food packaging and related applications. Manufactured in China,the food grade pet bottle washing line offers a cost-effective solution for plastic processors,packaging manufacturers,recycling plants,and material recovery facilities seeking reliable performance,flexible production capacity,and competitive factory-direct pricing. Product Overview The complete plastic recycling line can be customized according to the material type,contamination level,required output quality,and final application.Typical processing stages include: 1. Plastic waste feeding 2. Pre-sorting and metal removal 3. Crushing or shredding 4. Washing and friction cleaning 5. Hot washing, when required 6. Rinsing and dewatering 7. Drying 8. Label and dust separation 9. Melt filtration and extrusion 10. Pelletizing and final packaging The food grade pet bottle recycling line can be supplied as a complete turnkey line or as individual machines for integration with an existing recycling facility. Key Features Food-Safe Processing Design - Hygienic material-contact components available in stainless steel - Smooth internal surfaces designed to reduce material retention - Easy-access inspection doors and cleaning points - Suitable for processing plastic waste intended for regulated food-packaging applications,subject to final product testing and applicable certifications - Optional food-grade processing configuration for improved cleanliness and contamination control Wide Capacity Range - Processing capacity from 500 to 6,000 kg/h - Modular design for different production requirements - Available with single-stage or multi-stage washing and extrusion systems - Capacity can be adjusted based on material type,moisture content,contamination,and desired output quality Efficient Plastic Recycling - Heavy-duty shredders and crushers for consistent particle sizing - High-speed friction washers for removing dirt,paper,adhesives,and residual contents - Optional hot washing for challenging post-consumer waste - Efficient centrifugal dewatering and thermal drying - Advanced melt filtration to remove fine contaminants before pelletizing - Stable extrusion performance for producing uniform recycled plastic pellets Flexible Material Compatibility The food grade B2B PET bottle washing line can be configured for a variety of plastic materials,including: - PET bottles and containers - HDPE bottles and packaging - PP containers,crates,and caps - Food packaging scrap - Post-industrial plastic film and rigid plastic - Household plastic packaging - Production waste from injection molding and blow molding The exact line configuration depends on the material composition and the required recycled pellet quality. Main Equipment Components Plastic Crusher or Shredder The crushing system in food grade PET bottle cleaning system reduces plastic waste into uniform flakes for efficient washing and downstream processing.Replaceable wear parts and durable cutting blades support continuous industrial operation. Washing System The washing section may include: - Pre-washing tanks - Friction washers - High-speed rinsing units - Hot washing tanks - Floating separation tanks - Screw conveyors and material transfer systems This combination helps remove soil,food residue,labels,oil, adhesives,and other contaminants. Dewatering and Drying System Centrifugal dewatering equipment removes surface moisture from washed flakes.Thermal or hot-air drying systems can further reduce moisture before extrusion,helping improve pellet quality and processing stability. Extruder and Melt Filtration The extruder melts and homogenizes the cleaned plastic flakes.A continuous screen changer or automatic melt filter can be installed to remove remaining solid impurities and improve the consistency of the recycled material. Pelletizing System Depending on the product requirements,the food grade pet bottle recycling machine can use: - Water-ring pelletizing - Strand pelletizing - Hot-cut pelletizing - Underwater pelletizing for selected applications The final pellets are suitable for reuse in injection molding,extrusion,blow molding,sheet production,fiber production,and other plastic manufacturing processes. Advantages of the Equipment - Factory-direct China pricing - High processing capacity from 500 to 6,000 kg/h - Complete turnkey recycling line available - Reduced labor requirements through automated material transfer - Energy-efficient washing and drying configurations - Durable construction for continuous industrial operation - Customizable layout and component selection - Improved recycling efficiency and material recovery - Stable recycled pellet quality - Optional PLC control and touchscreen operation - Technical support,installation guidance,and operator training available Control and Automation The food grade pet bottle washing machine can be equipped with a centralized electrical control system featuring: - PLC-based automatic operation - Touchscreen monitoring - Motor overload protection - Temperature and pressure control - Emergency stop functions - Automatic feeding and material transfer - Production status and fault indication - Optional remote troubleshooting support Automation level can be selected according to production requirements and budget. Typical Applications This food safe B2B recycling machine is suitable for: - Food packaging recycling - PET bottle recycling - HDPE container recycling - PP packaging recycling - Plastic film and rigid plastic recovery - Post-industrial scrap recycling - Packaging factory waste management - Recycled pellet production - Closed-loop plastic manufacturing - Commercial and municipal recycling facilities Food-Contact Application Notice Equipment used for food-related plastic recycling can be manufactured with hygienic design features and food-grade material-contact components.However,whether the recycled plastic is suitable for direct food contact depends on the input material,decontamination process,regulatory requirements,laboratory testing,and final product certification.Customers should confirm applicable requirements with the relevant regulatory authorities before using recycled pellets in food-contact applications. Customized Solutions Customers can provide raw material photos,videos,samples,or process details for a recommended food safe plastic recycling equipment configuration and factory-price quotation. Each recycling project can be configured according to: - Plastic type and form - Required production capacity - Contamination level - Required flake cleanliness - Final pellet specifications - Available factory space - Water and energy availability - Degree of automation - Local electrical standards - Budget and investment plan Why Choose This Plastic Recycling Line? The 500–6,000 kg/h food grade pet bottle cleaning system provides a practical and scalable solution for converting plastic waste into valuable,reusable raw materials. This B2B food grade cleaning system’s modular structure,high-capacity design,hygienic processing options,and customizable automation make above food safe plastic recycling equipment suitable for both new plastic recycling plants and existing facilities upgrading their production capacity. B2B Food Grade Cleaning System with Modular Design Customization High-Output Automation:https://www.petrecyclingmachinery.com/B2B-Food-Grade-Cleaning-System-with-Modular-Design-Customization-High-Output-Automation-pd585605848.html PET Bottle Washing Line Manufacturer - Haorui Machinery:https://www.petrecyclingmachinery.com/PET-Bottle-Washing-Line-pl43660357.html Plastic Recycling Machines & Solutions - Haorui Machinery:https://www.petrecyclingmachinery.com/products.html PET Bottle Recycling Machine & Plastic Crusher - Haorui Machinery:https://www.petrecyclingmachinery.com/
高速单层膜吹袋机
产品分类 : 吹膜挤出机
先进的螺杆设计和槽式给料机,材料混合比例良好,产量高,生产质量可靠。 独特的模头和风环吹出稳定气泡,并产出更均匀的膜厚和更均匀的袋子。为T恤包,购物袋,农业等许多方面提供了一个很好的解决方案。 机器高度可调整。 特性 原料应用:HDPE / LDPE / LLDPE / EVA 高效率机器,能耗低但产量高。 高级齿轮箱带强制润滑系统和油冷却器。 螺杆和料桶的混合性能好。 选配装置 自动进料机 单层膜模头与风环 A/A双层膜模头与风环 旋转模头 手动换网装置 IBC (气泡内部冷却装置) OBC 膜厚控制系统 Corona 表面处理机 压花轮 双收台 荷重元 连线柔版印刷机
FB 大型吹袋机
产品分类 : 吹膜挤出机
Film width 2000 ~ 4000mm, for general packing and agricultural Hutch. Heavy duty construction, take up tower. Automatic surface winder with uploading device. Swing type manual screen changer. LDPE / LLDPE Heavy Duty Big Size Blow Film Machine. Screen changer of swing manual type. Extruding die of single spiral channel gives even and smooth flow pressure, Air ring of dual orifice design ensures ultimate cooling. Heavy duty steel structure takes up tower. EPC (Edge Position Controller) Fully automatic big roll type single winder or back to back auto winder.
Blown Film Accessories
产品分类 : 分离与过滤设备
The critical details that perfect your blown film line, ensuring absolute stability from melt filtration to bubble stretching. We offer a variety of high-precision screen changers and bubble stabilizing systems that operate seamlessly with our die heads. These accessories effectively enhance raw material purity, reduce thickness tolerances, and significantly minimize downtime during material changes, delivering ultimate production efficiency to your blown film equipment.