PRM-TAIWAN-塑胶机械与橡胶机械入口网

搅拌机和搅拌机

产品
高速混合机
高速混合机

产品分类 : 橡胶搅拌机

本公司针对各类物料混合设计生产两种形式如下: KCA: 采用固定转速马达驱动,适于一般物料混合。 KCB: 采用两段速度变极马达驱动,适于量大之物料混合,物料混合均匀。

密封式高速混合机
密封式高速混合机

产品分类 : 橡胶搅拌机

This Intensive Mixer is designed for mixing compounds and specific plastic. The structure of the machine consists of the main air cylinder, floating weight, feeding door, mixing chamber, rotors and discharge device. When performing mixing compound operations, the material and ingredients are fed together into the mixing chamber. The material in the mixing chamber is repeatedly sheared and squeezed by the rotors. This provides a series of chemical rotations between the material and the ingredients, which enables the material pieces to stick together into a paste mass shape. Mixing compound operations are performed according to the set temperature and conditions. This specially designed mixing machine provides efficient mixing and refining for a wide range of raw materials, such as raw rubber, resins, asphalt, cellulose, PVC ane EVA…etc.

混合机
混合机

产品分类 : 搅拌机和搅拌机

Mixer-Bonmart Extruder heading machine printing machine capping machine sealing machine accessories

立式冷却搅拌机
立式冷却搅拌机

产品分类 : 搅拌机和搅拌机

木质塑料复合树脂制造工艺的特殊设计。

Scraps Blenders
Scraps Blenders

产品分类 : 搅拌机和搅拌机

Pre-mix and Temporary Storage Before Pelletizing Anti-bridge Design The twin directional shaft prevents the scrapes from getting stuck in the blender and pushing it to the middle output valve. Moisture Removal The hot air blower is equipped to pre-heat and remove the moisture while mixing the scrapes. GENIUS

欧化混合式储料桶SSM-U
欧化混合式储料桶SSM-U

产品分类 : 搅拌机和搅拌机

该系列机型主要用于塑胶的混合搅拌和储存,不可用于各类塑胶粉末原料、食品、化学药品、易燃易爆及挥发性物品的混合和储存。若混合的塑胶原料切片尺寸不均匀或为其他形态时,需要考虑原料堆积比重。

密闭式混合机
密闭式混合机

产品分类 : 橡胶搅拌机

橡胶、塑胶及化学工业原料混合加工用特色: 1. 搅拌轴: 以特殊合金钢铸造,设计为二翼式,翼尖熔接耐模耗材料及全部表面镀硬质铬及抛光处理,翼根设计有冷热媒传导回路,热传导效果良好。 2. 混合室: 以中碳钢板焊接组合加工制成,混料接触面均经镀硬质铬及抛光处理,中间槽为钻孔式回路,具有优良之热传导。 3. 卸料门: 设计为落门式,结构坚固,防漏效果良好。 4. 加压锤: 以垂直空压缸操作,达到压料在混合室内良好混练效果。

PVC 高速溷合、冷拌机
PVC 高速溷合、冷拌机

产品分类 : 搅拌机和搅拌机

●粉尘不易外洩  ●不用搬运原料, 节省人力、时间  ●变极马达驱动  ●简易清洗

立式搅拌机 (YBVM)
立式搅拌机 (YBVM)

产品分类 : 搅拌机和搅拌机

多片叶片产生涡流,全方位混合原料,能搅拌快速且均匀。 整体内外抛光,不残留搅拌物。 附马达超载保护装置与电源连锁系统,操作绝对安全。