PRM-TAIWAN-塑胶机械与橡胶机械入口网

挤出涂布机

产品
全电脑6色印刷机、上光与左侧烘箱PCD-80-06-UV-L
全电脑6色印刷机、上光与左侧烘箱PCD-80-06-UV-L

产品分类 : 挤出涂布机

-烘箱放置左侧,排管人员不受空间的限制,方便排管,以利日后连缐作业或者可将生产缐一字排列。 -软管退管方式,采用自动提出方式,可减少使用气压退管时的噪音。 -本机增加无肩印刷的功能,可与一般正常印刷功能互换,一机二用,减少成本。

双面淋膜机(YSL-T)
双面淋膜机(YSL-T)

产品分类 : 挤出涂布机

• 机台由铸件组合而成。 • 本机通过CE安全认证。 • T-DIE是采用内插销宽度控制。

单面覆膜机HY7/LH-90
单面覆膜机HY7/LH-90

产品分类 : 挤出复合机

•Extrusion coating lamination plant and machine: •Specially designed screw performs high mixing and high output extrusion with stable conveying conditions and excellent plasticization. •Extrusion lamination machine is designed barrel with groove line on surface and forced type concentrated cooling system, highly efficient cooling function , makes temperature control easier. •Adopts AC or DC drive for high transmission efficiency and energy saving. Internal deckle type T-die is used to reduce the occurrence of uneven thickness of the coated edge. •Steel cooling roller, surface hard chrome plated, internal design is double shell spiral baffle and single flow type. This offers uniform surface temperature transmission and better cooling efficiency. •Pressure roller is silicon rubber covered, and uses internal water cooling system. The hardness of the silicon rubber prevents laminated sheets from sticking to the roller.

Aluminum Foil Coating & Laminating Machine (WACL Series)
Aluminum Foil Coating & Laminating Machine (WACL Series)

产品分类 : 挤出涂布机

WACL series is not just a convention dry laminating machine. The cold form foil is very much concerned proper & precise tension control to handle such thick laminates. In terms of tension control, this machine has mainly designed for Alu-alu foil multi-layers lamination. The arch dryer roller has synchronized with line speed, it’s very low friction and steady when film pass through the dryer. The internal drying chamber has safety LEL detection, this system can automatically discharge when detected high VOC occur during the production. This machine also combined heat seal lacquering coating function. Additional primer coating unit before lacquering unit, so it allows to apply two side (primer+heat seal) coating in one pass. The coating unit has alternative function with direct gravure and semi-flexo coating systems. Coating trolley along with self-pump system and able for quick job change.

全电脑8色印刷机、上光与烘箱
全电脑8色印刷机、上光与烘箱

产品分类 : 挤出涂布机

Double transferring rollers design. Stopless roller adjustment design. Plate wheel outer finetune mechanism Quick release ink rollers. Printing wheel clean system (200 mm dischargeable) Sleeve Printing Plate wheel pre-register mechanisim.

三层押出淋膜机(YSJ)
三层押出淋膜机(YSJ)

产品分类 : 挤出复合机

● Working Material: BOPP film, CPP film, PET film, Cellophane, Aluminum foil, Paper, Non-woven fabric, PE film, Nylon film ● Resin: PP / LDPE / LLDPE / EVA / EAA / SURLYN

电脑8彩印,涂布干燥机 -  PCD-120-08H
电脑8彩印,涂布干燥机 - PCD-120-08H

产品分类 : 烫金机

精心设计的墨水传输系统运行良好。特别是广泛的印刷和丝网印刷。可折叠的墨水单元易于清洁。换色和印版。

自动钻孔贴箔锁盖机
自动钻孔贴箔锁盖机

产品分类 : 挤出涂布机

● There are three functions in this machine, and you can operate them individually or synchronously. ● With additional conveyor for feeding tubes automatically. ● No tube, no sealing and capping. ​

全电脑6色印刷机、上光与烘箱
全电脑6色印刷机、上光与烘箱

产品分类 : 烫金机

Precise index ensures accuracy of every movement. It is easy to disassemble the printing mandrel. Tube feeding system works with detector. Coating mechanism will not move. Without tubes on mandrels. Equipped with precipitator. Corona system can keep tube clean before printing. With optional sleeve printing mechanism. Tubes are headed directly after printing. No double-heading or double cutting procedures and save material. Vastly used on printing different shape of tubes.

双面押出淋膜机(YSJ)
双面押出淋膜机(YSJ)

产品分类 : 挤出涂布机

● Working Material: BOPP film, CPP film, PET film, Cellophane, Aluminum foil, Paper, Non-woven fabric, PE film, Nylon film ● Resin: PP / LDPE / LLDPE / EVA / EAA / SURLYN

单层押出联结式淋膜复合机(WEL-DT系列)
单层押出联结式淋膜复合机(WEL-DT系列)

产品分类 : 挤出涂布机

我们以最严谨的态度制造设备,就正如我们对模头品质的坚持,玮礼以多年在软性包装的专业的经验严选出最高品质的模头,并以我们的专业与日本第一模头制造商共同研发出最适合软性包装应用的淋膜复合模头。独家特殊的内挡片无耳料设计有效的达到节省废料的目的,并且适合于高速生产无须顾虑断料问题。所有的模头都是采用最顶级的钢材并经由多道加工及特殊处理的制程,所以不管是在稳定性、厚薄精度的控制都有高水准的表现。

DCF-80-01钻孔,铝箔封口机和旋盖机
DCF-80-01钻孔,铝箔封口机和旋盖机

产品分类 : 挤出涂布机

Automatic Drilling Machine Main motor: 1 HP Vacuum motor: 1/2 HP Speed: 40~60 pcs/min Drilling hole dia: Ø3~10 mm Tube dia: Ø16~60 mm Length: 50~120 mm Air consumption: 60 L/min Power consumption: 2.6 kw Machine size: 1300 x 1220 x 1100 mm Total net weight: approx. 300 kg