English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
1. Extruder is driven by AC Inverter duty motor, with excellent efficiency and lowest power consumption.
2. Extruder hopper with low-level sensor work with auto-feeder will keep material in stable supply.
3. Hydraulic driven screen changer avoid any particle goes to melting pump & flat-die.
4. Melting pump with accurate rotation control, keeps the material flow stable.
5. Extruder & melting pump speed is working on pressure synchronized controlling system.
6. Flat-die with individual flow & lip-gap control, keep the sheet thickness uniform.
7. By individual servo-drive, the forming roller will rotate at perfect balance speed.
8. Forming roller gap is controlled by servo-motor, with computerized control will be sure the roller gap accuracy.
9. With roller cooling water monitoring, will keep the sheet quality constantly.
10. Edge trimming + crushing + on-line recycling system wastage free.
11. Static eliminator will remove the sheet surface static- electricity.
12. With sheet tension control will keep the sheet-roll to be winded neat.
13. Winding shaft is using air-shaft and quick coupling connecting, when the roll reaches setting length, the shaft will rotate to un-loading position automatically .
14. With PC base + PLC controlling system, will keep all the production record for tracking, and easy for trouble-shooting.
15. Web base user interface, controlling & monitoring is able go through Internet.
2. Extruder hopper with low-level sensor work with auto-feeder will keep material in stable supply.
3. Hydraulic driven screen changer avoid any particle goes to melting pump & flat-die.
4. Melting pump with accurate rotation control, keeps the material flow stable.
5. Extruder & melting pump speed is working on pressure synchronized controlling system.
6. Flat-die with individual flow & lip-gap control, keep the sheet thickness uniform.
7. By individual servo-drive, the forming roller will rotate at perfect balance speed.
8. Forming roller gap is controlled by servo-motor, with computerized control will be sure the roller gap accuracy.
9. With roller cooling water monitoring, will keep the sheet quality constantly.
10. Edge trimming + crushing + on-line recycling system wastage free.
11. Static eliminator will remove the sheet surface static- electricity.
12. With sheet tension control will keep the sheet-roll to be winded neat.
13. Winding shaft is using air-shaft and quick coupling connecting, when the roll reaches setting length, the shaft will rotate to un-loading position automatically .
14. With PC base + PLC controlling system, will keep all the production record for tracking, and easy for trouble-shooting.
15. Web base user interface, controlling & monitoring is able go through Internet.
| Model No. | PT-120TS2/3 | PT-130TS2/3 | PT-150TS2/3 | ||
| Main Features | Extrudin Rate (kg/hr) |
HIPS: 330kg/hr PP: 260kg/hr |
HIPS: 450kg/hr PP: 350kg/hr |
HIPS: 630kg/hr PP: 500kg/hr |
|
| Sheet Thickness (mm) | 0.2~1.8 | 0.2~1.8 | 0.2~1.8 | ||
| Sheet Width (mm) | 600~1200mm | 600~1200mm | 600~1200mm | ||
| Sheet Cooling Type | By Roller Touching or Air-Knife | By Roller Touching or Air-Knife | By Roller Touching or Air-Knife | ||
| Finishing Roll Diameter | 1000mm (max.) | 1000mm (max.) | 1000mm (max.) | ||
| Multi-Layer | Optional | Optional | Optional | ||
| Extruder | Hopper Volume | 250 litters | 250 litters | 250 litters | |
| Recycled Crushed Material Feeder | yes | yes | yes | ||
| Barrel Inlet Rifling Design | yes | yes | yes | ||
| Barrel Inlet Water Circulation | yes | yes | yes | ||
| Main Driving Motor | AC 150HP inverter-duty | AC 200HP inverter-duty | AC 250HP inverter-duty | ||
| Screw L/D Ratio | 32~36 | 32~36 | 32~36 | ||
| Barrel Heating Zone | 6 | 6 | 6 | ||
| Barrel Venting | Optional | Optional | Optional | ||
| Barrel Heating Capacity | 60KW | 72KW | 84KW | ||
| Barrel Blower Cooling Zone | 6 | 6 | 6 | ||
| Screen Changer | Type | Two holes-exchange | Two holes-exchange | Two holes-exchange | |
| Driving Type | By hydraulic cylinder | By hydraulic cylinder | By hydraulic cylinder | ||
| Hydraulic Pump | 2HP | 2HP | 2HP | ||
| Heating Zone | 2 | 2 | 2 | ||
| Heating Capacity | 10KW | 12KW | 14KW | ||
| Pressure & Resin Temp. Sensor | 1 zone | 1 zone | 1 zone | ||
| Melting Pump | Melting Pump Capacity | 83 cc/rev. | 158 cc/rev. | 220 cc/rev. | |
| Driving Motor | AC 10HP Inverter duty | AC 15HP Inverter duty | AC 20HP Inverter duty | ||
| Max. Outlet Pressure | 250 bar | 250 bar | 250 bar | ||
| Heating Zone | 1 | 1 | 1 | ||
| Heating Capcity | 4KW | 6KW | 10KW | ||
| Pressure & Resin Temp. Sensor | 1 zone | 1 zone | 1 zone | ||
| Origin | Italy | Italy | Italy | ||
| Flat Die | Die Gape (mm) | 0.1 ~ 2.5 | 0.1 ~ 2.5 | 0.1 ~ 2.5 | |
| Flow Adjusting Block | yes | yes | yes | ||
| Die Lip Push Bolt | yes | yes | yes | ||
| Heating Zone | 5 | 5 | 5 | ||
| Pressure & Resin Temp. Sensor | 1 zone | 1 zone | 1 zone | ||
| Origin | Italy | Italy | Italy | ||
| Forming Roller Unit | Roller Diameter | 350mm x 3 pcs | 450mm x 3 pcs | 450mm x 3 pcs | |
| Roller Driving | 5HP servo motor | 7.5HP servo motor | 10HP servo motor | ||
| Roller Cooling Design | Double-shell | Double-shell | Double-shell | ||
| Roller Opening Control | by servo & computer | by servo & computer | by servo & computer | ||
| Auxiliary Cooling Roller | 200mm dia x 1pcs | 200mm dia x 2pcs | 250mm dia x 4pcs | ||
| Trimming & Coating Unit | Edge Trimming Knife | 2 pcs | 2 pcs | 2 pcs | |
| Crusher | 5HP | 7.5HP | 10HP | ||
| Blower | 3HP | 3HP | 5HP | ||
| Silicon Storage Tank | 100 litter | 100 litter | 100 litter | ||
| Silicon Coating Roller | 3 pcs | 3 pcs | 3 pcs | ||
| Silicon Circulating Pump | yes | yes | yes | ||
| Winder | Winder | 2 sets | 2 sets | 2 sets | |
| Sheet Tension Control | yes | yes | yes | ||
| Static Eliminator | yes | yes | yes | ||
| Finishing Roller Diameter | 1000mm (max.) @ 1000kg | 1000mm (max.) @ 1000kg | 1000mm (max.) @ 1000kg | ||
| Control System | PLC Control | yes | yes | yes | |
| PC Base System | yes | yes | yes | ||
| Web-Base Interface | yes | yes | yes | ||
