English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
伺服马达驱动 夹链袋专用制袋机
产品分类 : 塑料制袋机
1. 单伺服马达驱动、机体传动轻快、稳定。 2. 专为有电脑操作障碍者所设计的人性化电脑操作面板，易懂易操作。 3. 电脑按键式制袋长度自动调整，出袋长度精准、废料少。 4. 机器结构设计精简、组装精密，牢固耐用、保养简易。 5. 操作简便、封切口整齐美观又牢固、袋子表面不拖痕。 6. 电眼印刷追踪、袋子印刷位置精准，当发现印刷失准机器自动停机。
废旧轮胎回收分解系统
产品分类 : 破碎、粉碎和造粒设备
预碎系统设备可选镶嵌式刀具，大幅降低该工序的生产成本 粉碎和钢丝研磨清理相结合的二步齿式切裂系统高效分离橡胶和钢丝 双磁场钢丝分离系统最大限度减少钢丝的含胶量，提高钢丝品质 细碎系统为特殊设计的斜面阶梯剪切结构，配合高品质的合金钢刀具，提高剪切效率，降低维护频率 采用多点纤维除尘，在系统的多个模块中将纤维和粉尘逐步去除；中央脉冲除尘系统将生产过程中产生的粉尘统一收集，排放量小于8毫克/立方，符合国标GB/Z2.1-2007 可装载隔音系统，将设备噪音控制在85分贝以内 系统模块化设计，可根据生产要求扩大或添加功能模块 系统配有喷淋防火系统，确保安全生产 整线自动化控制，系统各单元之间关联运作，将产能最大化的同时对可能出现的异常情况有预判功能，最大限度确保系统安全
THREE LAYER BLOWN FILM EXTRUDER PLASTIC INFLATION MACHINE : KMTL-E3
产品分类 : 吹膜挤出机
The KMTL-E3 is a three-layer HDPE/LDPE/LLDPE/mLDPE blown film extrusion line offered in three sizes, with film widths from 900 to 1,800 mm and thickness from 0.02 to 0.20 mm, suited to car film, food packaging, and courier bags.The line comprises the KMTL-40-45-40 E3, KMTL-45-55-45 E3, and KMTL-55-65-55 E3 configurations, with screw diameters of Ø 40-45-40 mm, Ø 45-55-45 mm, and Ø 55-65-55 mm (28:1 L/D ratio), driven by 15-20-15 HP, 20-30-20 HP, and 30-50-30 HP AC motors with inverter. Film output ranges from 110 to 250 kgs/hr across the three sizes.Model line: KMTL-40-45-40 E3 / KMTL-45-55-45 E3 / KMTL-55-65-55 E3Suitable material: HDPE/LDPE/LLDPE/mLDPEFilm thickness: 0.02-0.15 mm / 0.025-0.20 mm / 0.03-0.20 mmFilm width range: 900 mm / 1400 mm / 1800 mmFilm output: 110 kgs/hr / 150 kgs/hr / 250 kgs/hrScrew diameter/type: Ø 40-45-40 mm / Ø 45-55-45 mm / Ø 55-65-55 mm, L/D ratio 28:1Driving motor: AC 15-20-15 HP / 20-30-20 HP / 30-50-30 HP + InverterDie diameter: Ø200 mm / Ø300 mm / Ø500 mmTake-up speed: 65 m/min / 45 m/min / 40 m/min
JIT Shopping Bag Making Line (JIT Series)
产品分类 : 制袋机按用途
The JIT Series is JANDI'S in-line shopping bag making line. Blown film extrusion, printing and bag making run as one continuous process, so resin enters at one end and finished, printed shopping bags leave at the other; there are no intermediate film rolls to store, transport or re-load. This listing covers the series as a whole, which is offered in mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and a two-colour full-automatic type. Because the steps are linked, JANDI'S describes the line by what it removes from a conventional three-machine set-up: separate handling between extrusion, printing and bag making, the floor space and storage for film rolls, and the die-cut scrap, which is recovered on-line and fed back. Line composition, printing configuration, bag size and output are configured with the buyer at quotation. Type: in-line shopping bag making line, JIT Series Process: blown film extrusion, printing and bag making in one line Configurations: mono-layer semi-auto, mono-layer full-auto, ABA full-auto, two-colour full-auto Single-side printing configuration, colour count confirmed at quotation Die-cut scrap recovered on-line No intermediate film roll storage between steps Line composition, bag size and output configured at quotation
JANDIS整合式环保袋制造设备-JIT-55
产品分类 : 制袋机按用途
大大节省了功耗相同输出所需的工作空间更少相同产量所需的工人更少减少人为错误并最小化所需的管理降低制作T-shirt袋的材料成本在T-shirt袋中使用可生物降解材料的最佳合作伙伴更好的密封质量，非常牢固的密封线减少碳排放，减少碳足迹
GRP-H 具有高级诊断功能的单相固态继电器，最高 120A
产品分类 : 控制设备
提出定制控制解决方案的能力可以快速满足最不同的自动化需求。 为此，GRP 系列提供了范围广泛的极其紧凑的 SSR，具有坚固的基本结构，但可根据电流大小（从 15A 到 120A）、控制类型和配置功能进行扩展。 电流范围从 15A 到 120A 超薄尺寸 IO-Link通信 数字和比例 (V/mA) 命令 控制模式（ZC/BF/HSC/PA） 线性电阻和红外灯 (LWIR/MWIR) 加热器控制 负载电压 480Vac, 600Vac 选择。 局部加热器断线报警（1/8） NFC配置 导轨安装
Slitting Machines ULTRA/ UHS
产品分类 : 分切机和复卷机
The SLIT-UHS series slitter is ideal for the serious slitting all types of flexible packaging materials as well as label stock & paper. The slitter comes standard with razor cutters and groove roller configuration. A shear cutter system is offered as option for paper and other pressure sensitive materials. The machine uses three AC Vector Drives and has automatic tension on unwind and rewind controlled through easy-to-use PLC & MMI touch screen. The machine features a vacuum roller that keeps the material stable during operation at high speeds 600m/min. Friction rings are used on rewind shafts to ensure the production of quality slit rolls when the film thickness varies.
Single Screw Pelletizing Extruder | CK-HS
产品分类 : 塑料制粒生产线
CK-HS series Single Screw Extruder can be applied to wide applications, e.g., masterbatch, compounding, and recycling. The screw rotational speed is second only to our CK-DHS high-throughput series. Possible materials : PP, HDPE, LDPE, PS, ABS, ABS & PC, PC, PA, PET, PBT, etc. Extruder screw : The extruder screw of CYKF’s single screw extruder is customized to satisfy different material formulations. The optimal configuration of screw zones ensures high-efficiency extrusion performance. The strict quality management guarantees good quality and long service life of this critical component. Die : The die material and mold runner must be selected and designed according to the physical properties and characteristics of plastics to avoid occurrences of uneven material flow rate, retention, excessive molding pressure, in-mold temperature increase, decomposition and carbonization or other situations that may damage material properties of plastics.
GRM-H 单相功率控制器 高达 120A
产品分类 : 控制设备
GRM-H 系列功率控制器的特性即使在需要特殊功能的复杂电气负载的情况下也能确保高效的加热管理，例如红外灯或碳化矽加热元件。 从 15A 到 120A 的紧凑尺寸 负载电压 480V, 600Vac 数字 IO-Link 通信 可配置的控制模式过零、突发触发、半单周期或相角 反馈 V、I、V2、I2、P、Z 软启动和电流限制 逻辑命令 Vdc、模拟、PWM 或 IO-Link 高级部分负载断路诊断 (1/8) 从机控制输出（两相/三相） 通过具有 NFC 技术的智能手机应用程序进行配置和诊断 通过数字输入的校准和警报重置命令
合掌机K3 Plus
产品分类 : 收缩标签机
K3 Plus is an automatic seaming machine with wide width. Plus series is our new generation seamer. The new design makes the most operator friendly machine available, facilitating training with the most automated machine on the market. Via automatic frictionless lay flat system, no need to adjust the forming section over times. Besides, new generation seamer has 3 independent tension zones that allow forming section for better lay flat control. We believe that the Plus series revolutionize the way shrink sleeves are converted.
F-4-ADC系列 机架式直流电源供应器
产品分类 : 电子、自动化和安全组件
采用脉冲宽度调制（PWM）开关技术，ADC 系列直流电源供应器具备高功率密度、短响应时间、高精度以及全方位的保护机制。该系列已被广泛应用于产品生产线、老化（Burn-in）测试、实验室及集成系统中。 ADC 系列具备直观易用的用户界面，并拥有模块化设计、体积紧凑与重量轻盈之优势。其提供 2kW、4kW 及 8kW 单机等三种型号，并可于 19 英寸机柜内进行并联高达 64kW。凭借灵活的配置设计，ADC 系列能以高性价比满足各种应用的需求。
打样机
产品分类 : 分切机和复卷机
FCM-1300适用对象 制版工厂，印刷工厂。 FCM-1300超强功能 检查版胴，包含字样及色泽深浅度的正确性。 试印不同色泽的样品，提供客户多样选择性。 FCM-1300特出优点 一人操作。 十分钟完成打样。 减低油墨及材料的浪费。 增加生产印刷的时间。 可使用印刷用材料及油墨。 FCM-1300 卓越性能 1. 印刷轮机械式定位 以近接开关做感应，配合机械式定位，确保每次印刷前精确定位。 2. 高解析镜头，放大屏幕辅助定位 高分辨率镜头，加上16倍放大屏幕显示，可清楚抓住版胴上的记号(箭头)，辅助寻找每支版胴上的定位箭头，减低目视定位的误差。 3. 可调式刮刀装置 刮刀片由两片组合式，增加硬度。可视版胴花样调整刮刀角度及压力设定。 4. 无轴式顶版座 取代传统轴心式置版，可单一人工操作，可依版胴宽窄作左右调整，上版容易且安全。 5. 可调式托版架 托版架以气压方式调整版胴上下位置，版胴拆卸方便，防止人工操作的危险。 6. 超大型印刷轮 (1)电镀铬研磨的印刷轮，平滑度好且防锈耐用。 (2)弹性佳的印刷用胶皮布，可与印刷轮彼此紧密密合。备有螺丝更换装置，胶皮布于污损或损坏时更换容易。 (3)印刷轮轴长达2500mm，视版胴的圆周长大小，一次可印出2份以上的样品，便于检视. 7. 向量式印刷驱动马达 刷轮传动以7 1/2HP 的向量式马达驱动。 8. 可调式打样速度 打样速度范围为20-90m/min.，可配合客户使用之材料厚薄及油墨性质调整。 9. 线性滑轨 应用于顶版座及胴座的直线移动装置皆采用线性滑轨，定位精度高，使平台作线性移动时，不会有打滑现象发生。
Dynisco UPR900 – Process Indicator
产品分类 : 配料、计量与混合设备
Display pressure, temperature, or even differential pressure • Optional second input/output for cost-effective single instrument • Analog retransmission of process variable allows signal to be sent to other devices • USB port option for access to configuration and log files • Modbus RS-485 and Modbus TCP Ethernet supported UPR900 Enhancements • Data logging option logs process values, set points and alarms to .csv file for use with spreadsheets • Easy-to-use Setup Wizard Graphical/text LCD display with color change LED backlight on alarm (red/green) • Graphical trend view of process, alarms and events as standard
伺服马达驱动 三折点断袋专用自动封切机+无芯卷取 自动换管机
产品分类 : 制袋机按用途
1. 单伺服马达驱动、机体传动轻快、稳定，全程制袋不停车。 2. 独家设计之可调式万用型折袋装置可折三种样式。 3. 可调式折袋装置可随袋子大小直接调整无须更换任何折袋架。 4. 本机器可生产无芯点断卷取塑胶袋。 5. 专为有电脑操作障碍者所设计的人性化电脑操作面板，易懂易操作。 6. 电脑按键式制袋长度自动调整，出袋长度精准、废料少。 7. 机器结构设计精简、组装精密，牢固耐用、保养简易。 8. 操作简便、封切口整齐美观又牢固。 9. 电眼印刷追踪、袋子印刷位置精准，当发现印刷失准机器自动停机。 10. 生产效率高，节省人力时间。
伺服马达驱动 四折点断袋专用自动封切机+无芯卷取 自动换管机
产品分类 : 塑料制袋机
1. 单伺服马达驱动、机体传动轻快、稳定，全程制袋不停车。 2. 独家设计之可调式万用型折袋装置可折"M"型袋。 3. 可调式折袋装置可随袋子大小直接调整无须更换任何折袋架。 4. 本机器可生产无芯点断卷取塑胶袋。 5. 专为有电脑操作障碍者所设计的人性化电脑操作面板，易懂易操作。 6. 电脑按键式制袋长度自动调整，出袋长度精准、废料少。 7. 机器结构设计精简、组装精密，牢固耐用、保养简易。 8. 操作简便、封切口整齐美观又牢固。 9. 电眼印刷追踪、袋子印刷位置精准，当发现印刷失准机器自动停机。 10. 生产效率高，节省人力时间。
PT46X5 Series
产品分类 : 传感、监控与检测设备
The PT46X5 Series transmitter is a +/- 0.5% sensor ideal for general purpose melt pressure measurements requiring simple installation, repeatability and reliability. The PT46X5 transmitters provide the industry standard 0 – 5 Vdc amplified signal designed to work with DCS and PLCs, 1 – 6 Vdc outputs are also available. The PT46X5 comes equipped with zero and span pots to adapt the transmitter to process conditions. Optional thermocouple or RTD configurations are available to provide melt temperature. The PT46X5 features a 1/2-20 UNF thread for installation in standard transducer mounting holes and can be supplied with a variety of electrical connections. The PT46X5 Series includes models PT4605, PT4625, PT4635, TPT4605, TPT4625, and TPT4635.
3D立体成人口罩制造机 (CE版本)
产品分类 : 制袋机按用途
The MGA-MSK-KN95 (CE) is a fully automatic ear-loop type mask machine built for FFP2 and KN95 mask production, forming non-woven fabric layers into a three-dimensional mask body, welding the layers, attaching a nose bridge piece, and adding ear loops in a single automated production sequence. The machine runs a fixed mask size compatible with FFP2 / KN95 mask specifications.Output reaches 40 - 50 pcs/min from a footprint of 9,200 (L) x 2,200 (W) x 1,800 (H) mm. Optional equipment extends the base configuration with an inkjet printer, a nose foam labeling system, and an upgrade to a Herrmann ultraschall ultrasonic system made in Germany.Model: MGA-MSK-KN95 (CE)Mask size: fixed size, compatible to FFP2 / KN95 maskOutput: 40 - 50 pcs/minMachine dimension: 9,200 (L) x 2,200 (W) x 1,800 (H) mmMachine weight: 2,500 kgOptional: Inkjet printer (European brand)Optional: Nose foam labeling systemOptional: Upgrade ultrasonic system to Herrmann ultraschall (made in Germany)
DHL 制袋机
产品分类 : 封口机
1. 单伺服马达驱动、机体传动轻快、稳定、每分钟可生产180个袋子。 2. 专为有电脑操作障碍者所设计的人性化电脑操作面板，易懂易操作。 3. 电脑按键式制袋长度自动调整，出袋长度精准、废料少。 4. 机器结构设计精简、组装精密，牢固耐用、保养简易。 5. 操作简便、封切口整齐美观又牢固、袋子表面不拖痕。 6. 电眼印刷追踪、袋子印刷位置精准，当发现印刷失准机器自动停机。 7. 简易的折角装置、可生产超过15款以上变化的塑胶袋。 8. SHSS-T 双伺服传动机种可同时生产两种不同尺寸之彩色印刷塑胶袋。 • 传统型离合器 / 煞车控制、排齿传动系统，亦可生产。
Loss-In-Weight Feeder
产品分类 : 配料、计量与混合设备
Loss-in-weight feeder is a gravimetric metering device that provides continued feeding without cause batch problems. The feeder receives constant feedback from the sensor to ensure the materials are delivered in a precise amount that saves manpower successfully. CYKF provides different types of loss-in-weight feeders, including single screw, twin screw, and the models for feeding liquids. Various sizes and configurations are available to satisfy wide applications. Our team equipped with both profession and experience in the field of plastic extrusion. We provide suggestions and service for equipment integration to help customers save more money and get higher profits.
SPX 4系列
产品分类 : 传感、监控与检测设备
■ 4-20mA loop-powered output ■ +/- 0.25% accuracy available ■ Wide selection of pressure ranges available ■ Turndown 6:1 ■ Configurations available for use in hazardous locations ■ Remotely configurable via HART ■ Precise, repeatable pressure measurements ■ Output supplied directly to DSC or PLC ■ Meets CE requirements ■ CE ATEX Intrinsically Safe Approved ■ SIL 2 Certified (pressure output) ■ PL'c' Certified (relay output) ■ Additional approvals are available
LS-A 非接触式 – 采用 TWIIST 技术 – 模拟输出
产品分类 : 传感、监控与检测设备
LS-A 系列在坚固性、热稳定性和 EMC 抗扰度方面的高性能使它适用于工业环境和移动液压应用。 行程从 50 到 900mm 测量：位置 输出：比率、电压和电流 自对准安装机构 单一和冗余配置中的直接和反向模拟输出 工作温度：-40...+85°C IP67防护等级 RoHS 2011/65/欧盟合规 M12 连接器输出 - 4、5、8 针公头
Kraft Paper Envelope with Air Bubble Making Machine
产品分类 : 制袋机按用途
The MGA-47D-800 kraft bubble mailer machine produces padded envelopes that combine a kraft paper exterior laminated with PE with a 2- or 3-layer flat bubble film interior on a paper core, plus a releasing film for the adhesive closure strip. Size is set by servo motor and digital computer with a photocell sensor, covering an effective cutting width of Max. 640 mm and effective cutting length of Max. 500 mm. Three sides and the bottom are firmly welded using both upper and lower heating elements plus ultrasonic sealing, and the bottom mold can be changed to switch bag length. Various unwind configurations support large single-line bags or small twin-line bags with double-layer feeding, each fitted with an EPC tracking device and tension control; output reaches 20 - 50 pcs/min for widths over 320 mm, or 20 - 50 pcs/min × 2 in twin-line mode for widths under 320 mm. Model: MGA-47D-800 Feed material: Paper laminated with PE (external); 2 or 3 layers flat bubble film (with paper core); releasing film for adhesive Effective cutting width: Max. 640 mm Effective cutting length: Max. 500 mm Output (width over 320 mm): 20 - 50 pcs/min Output (width under 320 mm, twin line): 20 - 50 pcs/min × 2 Sealing: heating (up/down) + ultrasonic, three sides and bottom Unwind: single-line and twin-line with EPC tracking
TC53 热流道温度控制器
产品分类 : 控制设备
TC53兼具高性价比与模块化配置，支持潜在漏料预测与提前警报、自动模具识别及参数快速读取，搭配直观的模具视图，加快异常检测；支持OPC UA，实现智能工厂联网。
破碎机-GXC 系列
产品分类 : 破碎、粉碎和造粒设备
GXC系列重型粉碎机是为了满足高产量破碎和大型物料一次性破碎的生产需求而设计的。此外，该系列破碎设备在各类生产线中常被置于撕碎机之后作为二级破碎使用。除了箱体两侧配备标准的耐磨板之外，箱体其它关键部位也可加装耐磨件。刀辊及定刀周围可堆焊耐磨层，确保使这一系列更加适合破碎碎玻璃纤维、含沙薄膜等容易造成设备磨损的物料。
Fully Servo Motor Control Automatic Sealing, Cutting & Folding Garbage Bag Machine
产品分类 : 塑料制袋机
This fully-servo garbage bag production system integrates sealing, cutting, folding, and finishing into one automated workflow. It supports 1-fold, 2-fold, 3-fold, and 4-fold configurations, enabling flexible production for different garbage bag formats and packaging requirements. Enhanced with a high-precision PLC control system and intuitive HMI interface, the machine ensures stable output, consistent quality, and optimized productivity for high-volume operations.
滤水网袋封切机
产品分类 : 制袋机按用途
1. Servo Motor Driven, Efficient mechanical structure produce 120 bags per minute. 2. User-friendly Control Panel, easy to understand easy to operate. 3. Digital control for production length adjusting, precise and less wastage. 4. Simple design, assemble precisely, durable, and easy for maintaining. 5. Easy operating, Pleasant cutting and sealing, with high firmness and no scratch. 6. Real time printing tracing control for accurate registration, when printing error occurred machine will stop automatically. 7. Equip with Front Thick Bags Sealing Device, will able to produce any long length of bags. 8. SHCG-T Twin Servo Motor Driven Model can produce two different size of printed plastic bag at same time. • The Conventional mechanical clutch / brake and rack & pinion system is also available.
4.2米大型双层共挤押吹膜机
产品分类 : 吹膜挤出机
主机的尺 寸组合可根据生产需求客制化，可以调整成不同的尺寸，如 90+120或其他组合。 两层薄膜的应用范围 ：农业用膜、覆盖膜、淋膜用膜、快递袋、冷冻包装等。 配备两台独立式齿轮箱、两组马达、两台主机及两组独立式的控制。 全自动切割换卷的卷取机，可以使机器更自动化，并节省操作人员的时间。 旋转器可让薄膜厚薄更均匀 最大膜宽可到4.2米，剖单边打开可到8.4米。 以下的规格并未展示所有型号，麻烦联络我们以询问更大的吹膜机 。
SPX 5系列
产品分类 : 传感、监控与检测设备
■ 4-2 0mA loop-powered output ■ Improved accuracy with Dynalarity ±0.2% available ■ Wide selection of pressure ranges available ■ Turndown 3:1 ■ Configurations available for use in hazardous locations ■ Remotely configurable via HARTTM ■ Precise, repeatable pressure measurements ■ Output supplied directly to DSC or PLC ■ Meets CE requirements ■ CE ATEX Intrinsically Safe Approved ■ FM Explosion Proof Approved ■ CSA Explosion Proof Approved ■ SIL 2 Certified (Pressure Output)
Dual-Die High-Speed Blown Film Machine
产品分类 : 吹膜挤出机
Dual Die Design × Stable Speed × High-Efficiency Bag Production Solution The KS-E55S Dual-Die High-Speed Blown Film Machine is a high-efficiency production line developed by KUNG HSING Plastic Machinery for general packaging bag applications. Featuring a dual die head configuration, the KS-E55S significantly increases total output while maintaining a stable production speed. This design allows manufacturers to meet production targets without pushing a single die to extreme speeds—ensuring smoother operation and reducing operator pressure on the shop floor. By distributing output across two die heads, the machine delivers high productivity with stable line speed, enabling operators to work efficiently without being overwhelmed during winding and downstream processes.
伺服马达驱动 双层式制袋机
产品分类 : 塑料制袋机
1. 单伺服马达驱动、机体传动轻快、稳定、每分钟可生产120个袋子。 2. 专为有电脑操作障碍者所设计的人性化电脑操作面板，易懂易操作。 3. 电脑按键式制袋长度自动调整，出袋长度精准、废料少。 4. 机器结构设计精简、组装精密，牢固耐用、保养简易。 5. 操作简便、封切口整齐美观又牢固。 6. 电眼印刷追踪、袋子印刷位置精准，当发现印刷失准机器自动停机。 7. 选购热针输送带，可作背心袋。
PLA/ PBAT Blown Film Machine
产品分类 : 吹膜挤出机
The PLA/PBAT Blown Film Machine (GF-LB Series) is a blown film line configured for compostable and biodegradable resins based on PLA and PBAT. It produces tubular film from these compounds for downstream bag making, in the same way that JANDI'S GF-L series does for conventional polyethylene, and is listed in the showroom specification table as the GF-LB Series with film width and extruder size selected per model. The line is built from an extruder, a blown film die, an air ring, a take-up tower and a winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. Film width, output and configuration are confirmed with the buyer at quotation; the specification table below lists the series range. Type: single-layer blown film machine, GF-LB Series Material: PLA/PBAT based compostable and biodegradable compounds Extruder, blown film die, air ring, take-up tower and winder Options: auto loader, manual screen changer, pressure gauge, die rotating unit Options: corona treater, flying knife, second station winder, air shaft, air chiller Film width and extruder size per model, confirmed at quotation
自动贴标点断袋换卷机
产品分类 : 制袋机按用途
1. 单伺服马达驱动、机体传动轻快、稳定，全程制袋不停车。 2. 独家设计之可调式万用型折袋装置可折三种样式。 3. 可调式折袋装置可随袋子大小直接调整无须更换任何折袋架。 4. 本机器可生产无芯点断卷取塑胶袋。 5. 专为有电脑操作障碍者所设计的人性化电脑操作面板，易懂易操作。 6. 电脑按键式制袋长度自动调整，出袋长度精准、废料少。 7. 机器结构设计精简、组装精密，牢固耐用、保养简易。 8. 操作简便、封切口整齐美观又牢固。 9. 电眼印刷追踪、袋子印刷位置精准，当发现印刷失准机器自动停机。 10. 生产效率高，节省人力时间。
切刀制袋机（GF-A812E-SV + C）
产品分类 : 切割机
型号GF-24SE / SV GF-S600 / SV GF-32SE / SV GF-S800 / SV GF-40SE / SV GF-S1000 / SV GF-50SE / SV GF-S1200 / SV切割宽度600毫米800毫米1000毫米1200切割长度800毫米膜厚0.01-0.1毫米生产SE型号：最大。 200次/分钟S型：最大后进纸器每分钟150次/分1个带GUSSET / Fold / Slitter / Attassive Tape涂胶器的控制面板1个带HMI控制伺服驱动器的1个套装，YASKAWA / JAPANL印刷网布1个套，病态/德国传送带1套收集表1套选件控制，EPC，三角折叠装置，冲孔装置，墨西哥帽冲孔装置，超声波密封装置，穿孔密封刀信封打孔模具，自动堆垛台手套制造机塑料手套制造机
Bottom Sealing Bag Making Machine Biodegradable Material(GF-A/SV Series )
产品分类 : 切割机
The GF-A/SV Series is a bottom sealing bag making machine configured for biodegradable material. It is the biodegradable-film version of JANDI'S GF-A/SV knife-cutting bag makers: tubular film is fed through a servo-driven machine that seals the bottom of each bag and cuts it off with a knife, producing flat bottom-sealed bags from PLA and PBAT based compounds.The GF-A/SV range is built in single-deck and multi-deck configurations, with the number of lines and the cutting width chosen per model, and the biodegradable version follows the same layout. Cutting width, cutting length, film thickness range, number of lines and production speed are confirmed with the buyer at quotation.Type: bottom sealing bag making machine for biodegradable material, GF-A/SV SeriesMaterial: PLA and PBAT based biodegradable filmServo driveKnife-cutting, bottom sealingSingle-deck and multi-deck configurations in the rangeNumber of lines and cutting width per modelCutting length, film thickness and speed confirmed at quotation
功能性清洗单元
产品分类 : 按应用分类的回收生产线
PET瓶回收行业逐步走向标准化, 成熟化，合理的清洗工艺及配置可实现整线运行的自动化，智能化。如下清洗线辅助系统可从不同方面提升最终产品的品质，减少人工投入，并且获得最大的产品附加值。可根据客户需求及产品的等级进行选配。
Lab Blown Film Machine for Biodegradable Material(TINY-BC28)
产品分类 : 吹膜挤出机
The TINY-BC28 is a laboratory blown film machine for biodegradable material. It is the biodegradable-resin counterpart of JANDI'S TINY-28 tiny inflation machine, sized for lab use, small and thin film samples and colour testing, so that PLA and PBAT based compounds can be blown into sample film on a small extruder before a production line is specified. Like the TINY series, it is a compact single-layer unit with a small-diameter screw, a blown film die, a take-up unit and a single-station surface-friction winder, operated from a temperature control panel. Film width and output are those of a bench-scale machine; the exact figures and the screw and die configuration for biodegradable compounds are confirmed at quotation. Type: laboratory blown film machine, model TINY-BC28 Material: PLA and PBAT based biodegradable compounds Application: lab use, small and thin film samples, colour testing Small-diameter extruder with blown film die Take-up unit and single-station surface-friction winder Temperature control panel Film width and output confirmed at quotation
100% PCR Blown Film Line
产品分类 : 吹膜挤出机
Designed for high-content recycled material applications, our 100% PCR blown film lines enable stable film production with reliable processing performance and consistent film quality. Single-layer, ABA, and multi-layer co-extrusion configurations are available to meet diverse production requirements and support more sustainable film manufacturing.
Lab Blown Film Machine for Water Soluble Material(TINY-BW28)
产品分类 : 吹膜挤出机
The TINY-BW28 is a laboratory blown film machine for water soluble material. It is the water soluble counterpart of JANDI'S TINY-28 tiny inflation machine, sized for lab use, small and thin film samples and colour testing rather than production, so that PVA based compounds can be blown into sample film on a small extruder before a full-size line is specified. Like the TINY series, it is a compact single-layer unit with a small-diameter screw, a blown film die, a take-up unit and a single-station surface-friction winder, operated from a temperature control panel. Film width and output are those of a bench-scale machine; the exact figures and the configuration for water soluble compounds are confirmed at quotation. Type: laboratory blown film machine, model TINY-BW28 Material: PVA based water soluble compounds Application: lab use, small and thin film samples, colour testing Small-diameter extruder with blown film die Take-up unit and single-station surface-friction winder Temperature control panel Film width and output confirmed at quotation