English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Transparent & Structural Plastic Compounds
产品分类 : PS树脂
This category includes high-impact transparent PS and other specialty engineering plastics, ideal for applications such as crystal-clear cups, protective covers, displays, and structural parts. These materials offer excellent optical clarity, processability, and impact resistance, supporting both injection and extrusion processes.
2RT开模轮胎胶囊专用橡胶射出成型机IRH-S2
产品分类 : 制鞋机
Mold opening design The 2RT surpasses the traditional top opening mold that can be used for the double or triple molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between. tyre bladder
30% Glass Fiber Reinforced Nylon 6 Material (PA6 GF30)
产品分类 : 复合材料
PA6 30% Glass Fiber Reinforced (PA6 GF30), also known as PA6 GF30 material or 30 glass filled nylon, is a widely used engineering plastic with excellent mechanical strength, rigidity, and heat resistance. This nylon compound performs consistently across different environments, offering easy injection molding, a smooth surface finish, and robust structural support.
VTOP 系列精密立式柱塞式射出机
产品分类 : 自动注塑机
● 专利模组化三合一可更换滑板设计，一机多用途● 可生产0.001-0.0001g精密射出产品● 专利IPIS可更换柱塞式射出系统，可模组化更换射出单元● 专利设计辅助进料系统，贮料跟卧式机一样精准● 柱塞式射出可大幅节省浇道塑胶● 两板直压式四缸锁模机构● 专利辐射式力学范本耐用30年● 安全光栅及安全门双重防护●智慧程式控制系统让射出更容易● 相对同规格机型，机台高度最低● 符合人体工学的工作台高度● 电脑控温气冷式油冷却系统● 精密节能油电伺服系统
高速曲肘式伺服节能射出成型机 (TSV 系列)
产品分类 : 液压夹模注塑机
特快锁模系统，采用油压差动回路，提高速度达60﹪以上，缩短周期，节省能源。 特殊无给油自润模板滑片，耐磨耐压，耐用性久。 自润铜司曲肘机构，确保机器之精度，可防止曲肘磨损。 采用BOSCH快速比例压力速度阀，此阀带有位置反馈，能够迅速反应回馈，达到敏捷精准的控制需求。 适用成型精密度高、薄壳成品之塑胶制品。 (成品厚度1 ㎜ L/t大于200) 蓄压器为选配装置。
上升-下降橡胶射出成型机
产品分类 : 橡胶注射成型机
产品特性射出量控制采高精密度光学尺设计，能准确的控制与计算射出量之大小。转射板设计具特殊的座进、座退功能，可使射嘴不死料。清料容易，品质稳定。安全设计备有高科技红外线安全电眼，并具有全自动警告系统及多重安全防护装置，可清楚掌握机台状况，确保安全。油路设计比压比流油路设计，稳定、安静、故障率低，两轴可同时操作。
转盘低压射出成型机
产品分类 : 卧式注塑机
Low pressure molding production is a process uses hot liquidify Polyamide material. Wire harnesses, connectors, sensors, micro switches, etc. These Automotive Electronics need to be waterproof and durable. rapid production, environmental protection, reduce the defect rates and better outlook design, the application of low-pressure injection machines in this automotive industry has gradually increased.
PET伺服节能注塑机伺服120PET伺服470PET
产品分类 : 卧式注塑机
Standard L/D ratio of 24 times and above for good plasticizing quality. Application of barrier type screw features and an extra barrier ridge to ensure homogenous plasticization when melting PET. Because of the viscosity of the PET, the screw speed and capacity of the hydraulic motor is upgraded to achieve higher plasticization. Compatible with auxiliaries such as PET preform molds, material dryer, mold sweat dehumidifier, water chiller, conveyor and post-cooling automation. Optional features such as a shut-off nozzle or an ejector on the fly are available. These are for shortening the total cycle time and maximizing the output.
ATOL系列精密多色多材质柱塞式射出机
● 分模线射出机可生产单色、双色、三色射出产品● 可搭配柱塞式或螺杆式射出● 两板直压式四缸锁模机构● 专利辐射式力学范本耐用30年● 智慧程式控制系统让射出更容易● 相对同规格机型，机台长度最短● 精密节能油电伺服系统
YR 多重崁入射出机圆盘系列
产品分类 : 立式注塑机
Vertical clamping with vertical injection. Rotary table oscillate 180 °, rotate back / forth for easy loading and finished parts pick out, to increase productivity. Rotary table with location pin, accurate positioning for mold alignment and automation. Robot interface capability for complete automation. Standardized wtih 2-sation function, and capable for 3-station or 4-station function & automation linkup for advanced efficiency. Standardized wtih 3-column clamp, and available for 4-column clamp upon request.
YD 立式关模立式射出四柱双射圆盘系列
产品分类 : 立式注塑机
A. 标准双色 采四柱立式锁模，并在上模板有2个独立的立式射出单元（独立的射出液压油路）外加圆盘所组合的双色射出机。 - 锁模力为90TON ~ 500TON，采用电脑控制，特别配置的液压系统，更适合 生产一般或特殊的双色（双物料）的射出成型。 - 上模板配置二个上模具，圆盘上配置三个下模具，成型时，圆盘120°逆时钟 旋转，即可完成双色(双物料)的射出成型或包覆成型。 - 高效率的圆盘，中间有水套装置，可供下模具的冷却运水。 - 可扩充电脑程序及特别的多站式圆盘（即二上模，四下模），并可在此二下模具加装自动化的嵌入与取出装置，即可达到全机的自动化作业，增加生产效能。 B. 其他双色 - 型1：在原有射出机的上模板，另加装一组独立的直立“射出单元”所组合的 双色射出机。 - 例：YH/YR/YC机型+直立射出。 - 型2：在原有射出机上，再加装一组或多组独立的卧式（水平）射出单元，所 组合的双色射出机。 - 例：YH/YR机型+卧式（水平射出）。 - 型3：由两种机型并合，共用一个“圆盘”所组合的双色射出机。 - 例：a、YH机型 + YT机型+圆盘（2站 ~ 4站） b、YH机型 + YH机型+圆盘（2站 ~ 4站）
Double injection molding machine – HDC series
产品分类 : 压板注塑机
The standard HDC series has two parallel horizontal injection unit to be able to produce a 2-color and 2 plastic material in a time to save time and increase the productivity. To equip Huarong’s patended rotary table, when the table turns, it is accurate on positioning and tilt-free, which Huarong promises the rotary table won’t fall down.
MICRO MOLDING
产品分类 : 注塑模具
Micro molding is a very specialized art form, which is a kind of tooling design , manufactures small and precision plastic components with polymer-based functional devices, by increasingly demanded in the fields of life science, electronics, medical, photonics, automotive, and aerospace. The tiny-scale molding form of injection molding that entails building a cavity to match the shape of the part you want to make, sort of like the plastic molding that makes Lego bricks. THERE ARE THREE DIFFERENT THINGS TO KEEP IN MIND WITH MICRO MOLDING : Micro means the size of the part. It is the most common definition when dealing with micro molding. Micro features relates to tiny parts on a larger part. As a whole, the part can be big, but its components can be smaller, or micro features. Micro tolerance is how the parts are measured and how close to the needed measurement the part has to be to be considered a good or usable part. When a part is molded, it has to measure within the needed measurement (the tolerance), which could be as small as a thousandth of an inch. Small parts that are simple to make have tolerances that are not as tight and would be considered regular molding. SOME ADVANTAGES OF DESIGN GUIDE IN YOMURA AS : Dimension Aspect ratios around 6:1 (material dependent) Wall thickness : 0.3 mm ( 0.012”) min. for plastic Hole dimension : 0.2mm ( 0.008”) – 0.5mm ( 0.02”) min. Pitch of hole : 0.3 mm ( 0.012”) – 0.50 mm ( 0.02”) min. Tolerance (min) : 0.01 mm ( 0.0004”) – 0.02 mm ( 0.0008”).
热流道系列- 针阀式浇口- VG 型号
产品分类 : 流道系统
● 产品浇口较为美观，但较不易换色。 ● 适用于交通器材，如保险杆、车门板或车灯成型、食品容器以及产品需要分段射出，设定时间开闭进浇口，并能够控制结合线等条件。
Atos系列精密分模线柱塞式微射出机
产品分类 : 卧式注塑机
● 没有直浇道，更节省浇道塑胶● 可生产更精密、更微小的微射出产品● 产品可向模具中心点靠拢，模具可微小化● 两板直压式四缸锁模机构● 专利辐射式力学范本耐用30年● 智慧程式控制系统让射出更容易● 相对同规格机型，机台长度最短● 精密节能油电伺服系统
