立式三柱转盘射出机 | PRM 塑胶机械采购平台

分类: 立式射出机

鑫野智动工业股份有限公司

国家: 台湾

电话: 886-3-321-8768

传真: 886-3-321-8769

联络人: 苏小姐

马上询问

Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding.
With double slide table or rotary design, put-in, take-out products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production.
High precision mold platen ( Parallelism/ flatness : 0.02/100 mm), heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend machine & mold life.
Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance.
Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks.
All series adapted Variable pump +PQ valves enable energy savings of 30~50%..
Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life.
Low oil temperature, durable parts, high speed injection, and quiet operation.
Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine.
All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.

机型		K75-10DV-1			K360-110-25DV-1			K410-180-40DV-1
射出系统
螺杆直径	mm	24	28	30	22	28	34	26	32	40
射料压力	kgf/cm²	1960	1440	1250	2330	1800	970	2330	1540	980
理论射出容积	cm³	38	52	60	46	74	110	74	113	176
最大射出重量	oz	1.56	2.1	2.4	1.9	3	4.4	3	4.6	7.1
射出率	cc/s.	27	37	42	31	50	74	51	77	120
锁模系统
夹模力	tf	10			25			40
夹模行程	mm	200
最大空间	mm	235			400
最小模厚	mm	35			200
模板尺寸	mm	440*220			500*290			560*300
柱内尺寸(H*V)	mm	300			360*150			410*150
顶出力	tf	0.7 (2.7)			0.7 (2.7)			0.9 (2.7)
顶出行程	mm	21 (40)			25 (40)			40 (40)
移模系统
移模型式	N/A	转盘			转盘			转盘
移模行程	mm	220			300			300
移模尺寸	mm	ø600			ø780			ø880
站数	sets	2~4			2~4			2~4
其它
电动机	kw(HP)	3(4HP)			3.7 (5HP)			5.5 (7.5HP)
电热	kw	3.4			3.4			5.6
机械尺寸	m	1.1 * 0.9 * 2.3	1.1 * 1.5 * 2.3	1.1* 1.5 * 2.3	1.6 * 1.2 * 2.7	1.6 * 1.5 * 2.8	1.7 * 1.6 * 2.8	1.8 * 1.4 * 3.0	1.8 * 1.7 * 3.1	1.9 * 1.8 * 3.1
重量	t	0.6	0.8	1	1	1.2	1.4	1.6	1.7	2

机型		K460-250-55DV-1			K520-250-80DV-1			K220-100DVR-1-S60
射出系统
螺杆直径	mm	31		38		44		30
射料压力	kgf/cm²	2471		1630		1210		0
理论射出容积	cm³	106		159		213		99
最大射出重量	oz	4.3		6.4		8.6		6.2
射出率	cc/s.	48		72		97		-
锁模系统
夹模力	tf	55			80			120
夹模行程	mm	200						250
最大空间	mm	400						600
最小模厚	mm	200						-
模板尺寸	mm	610*400			700*560			-
柱内尺寸(H*V)	mm	460*240			520*300			-
顶出力	tf	0.9 (2.7)			0.9 (2.7)			4
顶出行程	mm	40 (40)			50 (50)			凸出160
移模系统
移模型式	N/A	转盘			转盘			-
移模行程	mm	350			350			-
移模尺寸	mm	ø980			ø1200			-
站数	sets	2~4			2~4			2
其它
电动机	kw(HP)	6 (8HP)			6 (8HP)			15
电热	kw	6			6			9
机械尺寸	m	2.0 * 1.6 * 3.2	2.0 * 1.9 * 3.3	2.1 * 1.9 * 3.3	2.2 * 1.8 * 3.4	2.2 * 2.1 * 3.5	2.4 * 2.4 * 3.5	2.6 * 1.5 * 3.5
重量	t	2	2.3	2.7	2.2	2.6	3.2	6