English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
4 COLORS FLEXO PRINTING MACHINE (HIGH SPEED TYPE)
产品分类 : 柔版印刷机
These flexographic printers are able to print in four colors with the following possibility: 0+4, 1+3, 2+2 Max. printing speed 70-80 mts/min Standard printing length is max. 1000mm, bigger printing length can be requested as your demand Equipped with Edge Position Controller (EPC) We didn’t show all our models, please don’t hesitate to contact us for bigger printing machines.
Ultrasonic Therapeutic Massager KUP-200
KUP-200 is working with 1 million times ultrasonic vibration per second which causes the tissues to compress and expand.The mechanical and thermal effects help to localized increase of blood flow and for the treatment of selected medical conditions such as temporary relief of minor pain, muscle spasms, and joint contractures.
Bottom Sealing Bag Making Machine (Heat Cutting)(GF-J/SV )
产品分类 : 塑料制袋机
The GF-J/SV series is a heat-cutting bag making machine for bottom sealing bags, the type used for shopping bags and T-shirt bags where the bottom seal and the cut are made in one heated operation. The series covers the GF-J20E/SV, GF-J32E/SV and GF-JD32E/SV. The GF-J20E/SV makes a single lane up to 430 mm wide, while the GF-J32E/SV and GF-JD32E/SV run two lanes of 330 mm each; maximum cutting length is 750 mm on all three, on film from 0.008 - 0.08 mm, with length accuracy of + / - 1 mm.Production in non-stop operation is 220 CYCLES per minute on the GF-J20E/SV and 200 CYCLES on the two-lane models. Sealing uses a tensionless sealing type knife and a heat-cutting blade on a flat silicon base, with two or three temperature controllers depending on the model. SV models add a pneumatic lifting jumbo roll unwind stand, a servo drive system for bag length adjustment, digital control, rubber-roller out-feed with air blowing, and an automatic conveyor stacking unit. Punching presses, including in-line type, are optional.Type: heat-cutting bag making machine, bottom sealing bagModels: GF-J20E/SV, GF-J32E/SV, GF-JD32E/SVMax. cutting width: 430 mm (1 lane) or 330 mm x 2 linesMax. cutting length: 750 mm; film thickness 0.008 - 0.08 mm; length accuracy + / - 1 mmProduction: 220 CYCLES/min (GF-J20E/SV), 200 CYCLES/min (two-lane models), non-stop operationSealing knife: tensionless type; cutting blade: heat-cutting type; flat silicon baseSV models: pneumatic lifting jumbo roll stand, servo drive bag length adjustment, digital control, automatic conveyor stackingOptions: manual punching press, punching press, in-line punching press
Co-Extrusion Two Layer HIPS/GPPS Sheet Extrusion Machine
产品分类 : 流延膜与片材挤出生产线
Co-Extrusion Two Layer HIPS/GPPS Sheet Extrusion Machine
伺服手机钢框移载机
产品分类 : 自动化、机器人与软件
此移载机针对现有技术的不足，提供一种注塑机用钢片自动埋入上料装置，解决现有钢片埋入需要依靠人工手动埋入，效率低，报废率高，生产成本高的问题。 定位采用磁性接近开关，标准一轴控制系统，准确无误。 人机界面，操作方便，易懂,不需专业编程人员。
薄膜分条机
产品分类 : 分切机和复卷机
This slitting extension machine is located in front and rear of a film slitting extension machine, which is used to slit a HDPE film and extend, then yarns are fed directly to the film slitting extension Machine. The machine consists mainly of: Sheet width: 1,200 mm Opening rollers. Fixed flat knives with adjustable spacing ring to give strip width of 4.0 - 7.0 mm Transport rollers driven by 2 steps change drive. Winding beam devices of the selvedge yarn. Main drive: 2 sets machine attached one unit 2.2 kw motor Heater : each set machine attached 5 kw.
MN系列熔体压力传感器 - 电压型
产品分类 : 传感、监控与检测设备
Gefran MN系列压力传感器，可用于高温环境。 本系列传感器的主要特点是能够读出介质温度，范围高达400°C。 其结构原理是利用液体传送压力。 系统充填液体确保温度稳定。 利用应变计技术将物理测量值转换成电气测量值。
双色塑料高速吹袋机 KMTC - 40/45
产品分类 : 吹膜挤出机
康乔坚持只采用高等质的配备零件，诸如主机轴承皆采瑞典 SKF ，电磁开关皆采法国 TELEMECANIQUE ，且每台吹膜机皆附有计米器及累时器，主押出机的齿轮都经研磨，故稳定性高又静音。多样机型、多项配件选择，康乔工业就是能满足客户需求的专业塑料袋整厂设备输出的供应制造厂商。
FILM/BAGS WASTE PLASTIC RECYCLING MACHINE : KCR-85
产品分类 : 按应用分类的回收生产线
The KCR-85 is a film/bag waste plastic recycling machine for HDPE, LDPE, and LLDPE film or bags, crushing and reprocessing the waste into pellets at an output of 80-120 kgs / hr.Waste is crushed by a 15 HP crusher, moved via a 2 HP screw conveyor into a 5" feed size, then collected in a 1400 L waste tank before entering a single-degasification Ø 85 mm screw (L/D ratio 30:1) heated at 45.6 kw across 5 zones and driven by an AC 40 hp inverter motor. The melt is extruded through a circular-shape die with a hydraulic-cylinder screen changer, cooled by a water-cooling system with 2 HP x 2 pumps, dehydrated by a 5 HP motor, and pelletized by a 2 pcs (spring) pelletizer.Model: KCR-85Suitable material: HDPE/LDPE/LLDPEOutput: 80-120 kgs / hrCrusher: 15 HPScrew diameter: Ø 85 mm, L/D ratio 30:1Heating capacity: 45.6 kw, 5 zoneDriving motor: AC 40 hp + InverterDie type: Circular Shape Extrusion DieWaste collecting tank: 1400 L
三层相片袋名片袋封切机
产品分类 : 制袋机按用途
This machine is designed especially for all kinds of 3-layer photo pocket, name card pocket and all kinds of data pocket. It may be completed on fully automatic production from material in-feeding to finish product which will save labor cost and increase production capacity.
F-3 AMF系列 400Hz 电源供应器 / 地面电源
产品分类 : 电子、自动化和安全组件
AMF 系列电源供应器专为 400Hz 航空航天及军事应用所设计，包含实验室使用、机库与维修站之地面电源、机场以及工厂。稳定的 400Hz 电源输入有助于使用者进行检测、老化测试，以及向航空器供电。 AMF 系列的输出电压为 115/200V，具备 10% 的可调范围。使用者可在 400Hz 固定输出频率与 350~450Hz 可调输出频率之间进行切换。具备过载驱动能力与逆向能量保护，AMF 系列是电机、航空航天及军事类应用的理想选择。
HDPE/LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMT-45/55
产品分类 : 吹膜挤出机
The KMT-45/55 series covers two high-speed plastic inflation machines for blown film extrusion of HDPE, LDPE, and LLDPE resins, producing PE film in widths between 600-650 mm (KMT-45) and 900-1,000 mm (KMT-55) for applications such as car film and garment bags. The KMT-45 runs an Ø45mm screw at a 26:1 L/D ratio with a 20 HP AC driving motor and 3-zone auto thermo control, while the KMT-55 runs an Ø55mm screw at the same 26:1 ratio with a 30 HP AC driving motor. Film output ranges from 10-45 kgs/hr (H) and 20-55 kgs/hr (L) on the KMT-45, up to 20-60 kgs/hr (H) and 30-72 kgs/hr (L) on the KMT-55, with take-up speeds of 75 m/min and 65 m/min respectively. Models: KMT-45 / KMT-55 Suitable material: HDPE/LDPE/LLDPE (both) Film thickness: KMT-45 H 0.008-0.1 mm / L 0.02-0.15 mm; KMT-55 H 0.01-0.10 mm / L 0.025-0.15 mm Film width range: KMT-45 H 650 mm / L 600 mm; KMT-55 H 900 mm / L 1000 mm Film output: KMT-45 H 10-45 kgs/hr / L 20-55 kgs/hr; KMT-55 H 20-60 kgs/hr / L 30-72 kgs/hr Screw diameter/type: KMT-45 Ø45mm; KMT-55 Ø55mm (L/D ratio 26:1 both) Driving motor: KMT-45 AC 20 HP + Inverter; KMT-55 AC 30 HP + Inverter Take-up speed: KMT-45 75 m/min; KMT-55 65 m/min Machine dimension: KMT-45 470×165×400 cm; KMT-55 500×220×450 cm
TWIN HEAD HDPE PLASTIC INFLATION MACHINE : KMH-45T
产品分类 : 吹膜挤出机
The KMH-45T is a twin head HDPE plastic inflation machine producing double output HDPE film, with combined yield up to 48 kg/hour, width up to 400 mm per head, and thickness between 0.008 and 0.06 mm.Each head runs a Ø45 mm screw with a 28:1 L/D ratio and 9.6 kw heating capacity, cooled by a 1/8 HP x 3 barrel cooling fan and driven by a 20 HP AC motor with inverter. The die unit (2 units) uses Ø50 mm dies with Ø100 mm air rings and a 3 HP cooling blower, and the take-up unit runs at speeds up to 85 m/min.Model: KMH-45TSuitable material: HDPEFilm thickness: 0.008 ~ 0.06 mmFilm width range: 400 mm × 2Film output: 24 kgs/hr × 2Screw diameter/type: Ø45 mm x 2, L/D ratio 28:1Driving motor: AC 20 HP + InverterDie diameter: Ø50 mm x 2 / Air ring diameter: Ø100 mm x 2Take-up speed: 85 m/min
高压压力控制器（0-30bar）
产品分类 : 传感、监控与检测设备
产品型号: QKL-B1S.B2S、B3H 此为一个闭回路设计，由两个电磁阀、压力传感器以及电子回路控制所组成。根据接收到的模拟讯号输入，由一端电磁阀用来控制进气量，与另一端电磁阀来控制排气量，透过压力传感器测量得到并回馈于电子回路控制，以达到精确的压力比例控制，该比例阀适合针对随时需要精准调控压力变化，与监控压力值的产业。比例阀输入信号提供了0-10VDC(电压) 与 4-20mA(电流) 及 RS485 ModBus通讯选择。监控输出则有 1-5V、0-10V 及4-20mA 的选择。B1S、B3H-1系列为内部压力传感器 B2S、B3H-2 系列为搭配外部压力传感器 (※适合用于远程造成压差的环境条件下)压力比例阀，除了会自行调控达到恒压以外，还能回馈参数到机台上做监控，排除压力值不准或压差造成的震荡问题。 本产品皆符合CE认证、SGS、RoHS、ISO13485 等认证。
8 COLORS FLEXO PRINTING MACHINE (HIGH SPEED TYPE)
产品分类 : 柔版印刷机
Our machines are suitable to print PP, PE, BOPP, OPP, PE shrinkable film, packing paper, glass paper, non-woven bags. Using hydraulic system to lift up & down the printing cylinders for easy operation. Equipped with meter counter, the machine will stop automatically when reaching the meter. Using high-capacity hot air dryer to make the production faster. The dryer and fan will shut down automatic when machine stops. When machine stops, the ink rolls keep running to avoid drying of ink. The rubber roller is ozone-resistance & solvent-resistance. The ink tray is with cover & faucet. Ink pump, air shaft, ceramic roller & doctor blade etc. are options.
全自动三折背心 ＆ 底封袋制袋机-STB-28+3F / STB-40+3F
产品分类 : 塑料制袋机
全程电脑控制全程自动生产不停车伺服马达送袋装置易于调整袋子长度以及制袋速度无原料、塞料、色检异常时自动停车配有磁性滚轮刀模冲孔装置
Side Sealing Bag Making Machine Biodegradable Material(GF-S/SV Series)
产品分类 : 塑料制袋机
The GF-S/SV Series is a side sealing bag making machine configured for biodegradable material. It is the biodegradable-film version of JANDI'S GF-S/SV and SE/SV side sealers: folded or tubular film is sealed and cut along the side to make side-seal bags from PLA and PBAT based film.The GF-S/SV layout includes a rear feeder with gusset, fold, slitter and adhesive tape applicator functions, a servo drive, an HMI control panel, a printing scanner, a conveying belt and a collecting table. Options in the range include tension control, EPC edge guiding, a triangle folding device, punch hole and Mexican-hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mould and an automatic stacking table. Cutting width, cutting length, film thickness range and production speed are confirmed at quotation.Type: side sealing bag making machine for biodegradable material, GF-S/SV SeriesMaterial: PLA and PBAT based biodegradable filmServo drive with HMI control panelRear feeder: gusset, fold, slitter, adhesive tape applicatorPrinting scanner, conveying belt and collecting tableOptions: tension control, EPC, triangle folding, punch hole, Mexican-hat punchOptions: ultrasonic sealing, perforating sealing knife, envelope punching mould, automatic stacking tableCutting width, length, film thickness and speed confirmed at quotation
炮塔式四轴分条复卷机FSL-TR1300
产品分类 : 分切机和复卷机
此机型为华周工业最新发表的全自动分条机，以自动接料换卷，自动排纸管定位，成品辅助推料以及卸料装置，来达到连续式分条增加产能，减少人工换卷作业停顿时间。搭载彩色触控萤幕的人机作业系统也提供了简单易学的操作，以及作业参数的记忆，使产品品质稳定。
共挤押淋膜复合机(WCL系列)
产品分类 : 挤出涂布机
以经验丰富近四十年制造软性包装设备的经验。玮礼投入大量时间及成本极力钻研淋膜复合的包装技术，依靠的是我们对软性包装行业的专业及坚持，不断研发及创新制造符合这个日新月异高客制化需求的市场。对于熟悉印刷、贴合、淋膜押出所有整条包装流程技术的玮礼，我们相当有信心在多元化软性包装的领域中，势必为淋模押出复合设备制造的领先者。模头-无耳料设计我们以最严谨的态度制造设备，就正如我们对模头品质的坚持，玮礼以多年在软性包装的专业的经验严选出最高品质的模头，并以我们的专业与日本第一模头制造商共同研发出最适合软性包装应用的淋膜复合模头。独家特殊的内挡片无耳料设计有效的达到节省废料的目的，并且适合于高速生产无须顾虑断料问题。所有的模头都是采用最顶级的钢材并经由多道加工及特殊处理的制程，所以不管是在稳定性、厚薄精度的控制都有高水准的表现。
9" plate (3 partition)
产品分类 : Rigid Packaging & Containers
Product Number: EG-93 Color: White Material: Fiber Shape: Round
Vibrating Screen
产品分类 : 清洗与分选产线
The CYKF Vibrating Screen is used for sorting plastic pellets. It divides the pellets discharged from pelletizer. The machine can be combined with our strand pelletizing or underwater pelletizing extrusion lines.
JS 602D (Double Rows “I” Shape Tetra Pack Straw Packing Machine)
产品分类 : 吸管包装机
Straw Size : 4.2mm outer diameter x 90~140mm * 2 Packing Material : OPP Film Speed : 1000~1200 pcs/min Pitch between 2 Straws : 15 mm Copper Forming Pressing Roller :1 set Film take up roller with vacuum :1 set (Material: Silicon) tetra pack
Twin-Screw Extruder CCS2042-UWC
This model is specifically designed for recycling hard plastic materials and crushed flakes.
Ultrasonic Facial Cleaner UD-039
产品分类 : Cleaning Equipment
Facial Cleaner UD-039 is a portable and handy device using with rechargeable battery. It provides 25,000 times micro vibration per second which can penetration in skin massaging as well as cleaning. It will efficiently clean up the skin without harm, exfoliate the dead skin and make the skin more healthy, smooth, brighten & refreshed.
高速染色造粒机整厂设备
适用加纤色母造粒, HDPE, LDPE, LLDPE, PP, PMMA, ABS, PC, PS, 尼龙……等螺杆特别设计换料容易操作简易机器支架强韧客制化模头
PVC Wood-Grained Printing & U.V.Curing Equipment
产品分类 : 挤出涂布机
One line equipment includes a conveyor, U.V. curing machine, U.V. coating machine, 3-colors wood-grain printing machine, and wash-out machine, we can meet customers' requirements in choosing the suitable machine.
除湿干燥模组化组合
产品分类 : 塑料材料干燥机和除湿机
XPS板押出机生产线
产品分类 : 发泡成型与加工设备
Excellent thermal insulation Very low water & humidity absorbance Very high compression strength Very high mechanical resistance Stability of dimension Homogeneous density Easy to transport, cut & apply And many more
讯号转换器
产品分类 : 传感、监控与检测设备
ARICO - 【其它类别产品】最佳解决方案： 长新科技(ARICO)与台湾橡胶/塑胶射出工业领域共存共荣，奠基自1987年以来的长年纯熟制造技术，专注于工业控制仪器技术之研发与创新，特别擅长于精密「其它类别产品」相关产品之客制化制造生产。提供国内外厂商在「其它类别产品」产品上最方便的设定机制、稳定品质、合理价格，本公司除了累积长年客户肯定推荐之「其它类别产品」相关产品外，持续以扎实研发技术原理为经营基础，提供您在塑胶射出工业之温度控制、位移感测、压力传感、射出机物联网等精密工业控制上之最佳解决方案。
Spaghetti Type Recycling Machine(GSR Series)
产品分类 : 按应用分类的回收生产线
The GSR Series is JANDI'S water cooling, spaghetti type recycling machine for polyethylene and polypropylene film scrap. Film is fed by a spiral feeder into the extruder, and the melt is extruded through a spaghetti type die head into strands; the strands are cooled in a stainless steel water tank, dried by a blower and cut into pellets by a pull and cutting unit with a rotary cutter and fixed blade. A screen changer driven by an AC motor with reducer filters the melt ahead of the die.The series covers a range of extruder sizes and motor ratings so that capacity can be matched to the scrap volume of a film or bag plant; the figures for each model are listed per model in JANDI'S GSR specification table. Options include a conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen and an air blower with storage tank. Details are available with quotation.Type: water cooling, spaghetti type recycling machine, GSR SeriesMaterial: HD/LD/LLDPE and PP film scrapSpiral feeder into the extruderScreen changer driven by AC motor with reducerSpaghetti type die head, stainless steel water tank and blowerPull and cutting unit with rotary cutter and fixed bladeOptions: conveyor with metal detector, crusher, screw conveyor, vacuum pump, hydraulic screen changer, second extruder, vibrating screenExtruder size and capacity per model, confirmed at quotation