English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
软件产品及服务系统-iNET
产品分类 : 控制设备
iNet是一套完整的射出机工厂网络化管理解决方案，协助塑料厂生产与车间管理，藉由网络链接，作为管理层与生产现场沟通的桥梁；亦使管理者(administrator)进行全球营运，提供客户管理新趋势、掌控世界潮流，是成功迈向企业信息化的必备武器。
IN MOLD DECORATION
产品分类 : 注塑模具
In Mold Decoration (IMD) is a cost effective method of decorating plastic parts. It consists of four steps: Printing, Forming, Trimming and Injection Molding. After a plastic film is silk screen printed with a customer’s design, it is then thermo-formed over a soft tooled mold. Once the plastic decoration is shaped it is trimmed to size. After trimming, the shaped film is placed into an injection mold and a selected mold material is injected behind it forming an integrated bond. IMD offers long lasting decoration with multiple colors and textures. Beyond IMD, membrane switches and/or additional double injection molding can be added to your part or product for extended functionality.
直压式伺服节能射出成型机 (HCV 系列)
产品分类 : 卧式注塑机
• 新一代的直压锁模机构设计，一体成型高压缸，搭配插装式满油阀机构，钢体强度佳，机械寿命长，起压反应快速，开锁模动作快速稳定，确保精密成型。 • 全机电阻尺位置控制，操作简易且精度高。 • 采用高效率日本伺服马达(DAIKIN SUT SYSTEM)具压力、流量、回馈装置，达全闭环回路伺服控制，应答性0.07秒以内，再现性1%以下，直线性1%以下。 • 对角式双射移设计，受力平均，射台鞍座采用高精密度线性滑轨减低机械损耗，确保精准射胶动作。 • 储料背压采比例式控制。 • 螺杆、料管经电离子氮化处理寿命特长。
Moldpro Temperature Controller – Key Features
产品分类 : 流道系统
(1) Synchronized Heating: On startup, the software identifies the hot plates and activates synchronized heating, where faster-heating zones follow the slower ones, so all zones reach operating temperature at the same time. (Invention patent granted) (2) Over-Temperature Protection: If temperature rises 30°C above the set point and is out of control, the system sounds an alarm and cuts power to prevent fire and resin carbonization inside the runner. (3) Under-Temperature Alarm: If temperature falls 30°C below the set point and is out of control, the system sounds an alarm. (4) Auto Zone Detection: Automatically detects the number of zones on startup and powers them on, with no need to activate each zone manually. (5) Compact Design: 4-, 6-, and 8-zone controllers are only about the size of an A4 sheet, saving valuable floor space. (6) SCR Power Output: SCR phase-angle power output effectively protects the hot runner heating system. (7) Heater circuit fault detection. (8) Thermocouple open-circuit detection. (9) Thermocouple reverse-connection detection. (10) Instant Alarm: The system immediately sounds an audible alarm upon detecting any abnormality. (11) Optional valve gate control. (Patent pending) (12) Optional auto power-off when the injection molding machine is idle for an extended period. (Patent pending) (13) 2-year warranty (excluding fuses and damage caused by human error). (14) Product Liability Insurance: Covered by NT$20 million product liability insurance (Taiwan only). Warning: High voltage. Do not open the controller housing. (Covers bodily injury attributable to Moldpro products; actual compensation may differ from the insured amount.)
热流道系列- 针阀式浇口- VG 型号
产品分类 : 流道系统
● 产品浇口较为美观，但较不易换色。 ● 适用于交通器材，如保险杆、车门板或车灯成型、食品容器以及产品需要分段射出，设定时间开闭进浇口，并能够控制结合线等条件。
高速精密立式射出成型机-YQ系列
产品分类 : 立式注塑机
• Vertical four-pillar vertical clamping, with vertical injection. • The square pillar design comes with large mold size. The space within the column allows customers to install devices of automatic embedding and removing products. This allows automation for the whole machinery. • Big L / D ratio of screw, plasticizing evenly, suitable for injection molding of engineering plastics. • High standard computer control system with high precision injection pressure and high response injection speed. The quality is more stable for high-precision embedded injection molding products. • 1S single sliding: After mold opening, the lower mold will automatically slip in front of the operator for facilitating embedded molding operation. • 2S double sliding (Alternating double sliding): One mold for injection molding, another mold for taking out and putting on embedded parts operation. • 2SL double sliding (90°Alternating double sliding): One operator can operate independently. One mold for injection molding, another mold for material taking and putting on embedded parts. The two slidings are intersecting at 90 degrees, which can lower the production cost, and enhance the performance. • Able to combine automation and the high-speed injection can effectively enhance the production capacity. • A variety of circuit design (half closed servo hydraulic or high speed injection) to meet the customer’s requirements.
高速曲肘式伺服节能射出成型机 (TSV 系列)
产品分类 : 液压夹模注塑机
特快锁模系统，采用油压差动回路，提高速度达60﹪以上，缩短周期，节省能源。 特殊无给油自润模板滑片，耐磨耐压，耐用性久。 自润铜司曲肘机构，确保机器之精度，可防止曲肘磨损。 采用BOSCH快速比例压力速度阀，此阀带有位置反馈，能够迅速反应回馈，达到敏捷精准的控制需求。 适用成型精密度高、薄壳成品之塑胶制品。 (成品厚度1 ㎜ L/t大于200) 蓄压器为选配装置。
FILTER NOZZLE
产品分类 : 过滤与换网装置
The filter nozzle was installed in the front tip of the injection molding machine barrel and using different types of inserts lead to reach effectiveness of filtering impurities. Prevent the runner gate from clogging. Filter impurities. Easy to be installed and maintained.
曲肘式伺服节能射出成型机 (SMV 系列)
产品分类 : 卧式注塑机
• 双油缸射出的设计，射胶传动距离短节省空间。 • 螺杆、料管及易磨损机件经离子氮化处理，寿命特长。 • 多段射胶速度及压力控制，适合各种精密成型调整容易。 • 钢质衬套，渗碳处理后硬度高达HV800耐压耐磨，特久耐用。 • 曲肘自动给油润滑系统，附无油警报，可确保曲肘润滑性，保养容易。 • 油压多次顶出，配合机械手取出装置，达至全自动化生产阶段。 • 特快锁模系统，采用油压差动回路，提高速度达60%以上，缩短周期，节省能源。 • 低压锁模装置，保护模具。