English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
LIQUID INJECTION MOLDING
Liquid Injection Molding (LIM) and Transfer Molding are preferred processes for manufacturing solid silicone rubber items used in a wide range of applications such as medical equipment, watersports, gas masks, military gear, waterproof device cases, 3C products and much more. MATERIALS: Shin Etsu / Dow Corning/ GE Silicones ADVANTAGES & APPLICATIONS: Low viscosity and lower injection pressure, good for silicon molding Good chemical stability and environmental protection High dimensional accuracy It produces high quality parts without secondary finishing and allows much shorter production cycles than other processes. Over-molding together with hard plastic frame (PC or ABS etc.) for waterproof devices, shock proofing, shielding, etc. Very thin wall design (0.25mm thick around) for silicone to adhere on plastic housing (rib) to meet the demand of low profile product design. Water proof feature can be secured by the combination of soft rubber contacts and with constant pressure provided by hard plastic housing (rib).
Millad® NX™ 8000
产品分类 : 添加剂
Millad NX 8000 helps PP producers and converters to stay ahead of packaging, appliances, medical, houseware and food storage trends by achieving unprecedented transparency in polypropylene. This innovative clarifier creates exciting new opportunities for your products, including significant energy savings and faster production in injection molding. Suitable for all conversion processes, Millad NX 8000 makes polypropylene a viable alternative to glass or amorphous polymers like PC, PET, PVC and PS. PP clarified with Millad NX 8000, known in the market as NX UltraClear PP, answers the growing demand for clear, attractive products and sustainable, cost-efficient production.
FILTER NOZZLE
产品分类 : 过滤与换网装置
The filter nozzle was installed in the front tip of the injection molding machine barrel and using different types of inserts lead to reach effectiveness of filtering impurities. Prevent the runner gate from clogging. Filter impurities. Easy to be installed and maintained.
J型机构橡胶射出成型机
产品分类 : 制鞋机
●备料简单容易，不须秤重或考虑产品外型。 ●胶料经螺杆射出及保温控温之预热过程，有效缩短成品硫化时间、提高生产效率。 ●采用流道充填模头方式，针对形状复杂成品亦能轻易成型。 ●搭配模具之设计及定量射出控制，可大幅改善无效毛边、节省工时成本。 ●立式夹模机构，方便含骨架工件放置。
YR 多重崁入射出机圆盘系列
产品分类 : 立式注塑机
Vertical clamping with vertical injection. Rotary table oscillate 180 °, rotate back / forth for easy loading and finished parts pick out, to increase productivity. Rotary table with location pin, accurate positioning for mold alignment and automation. Robot interface capability for complete automation. Standardized wtih 2-sation function, and capable for 3-station or 4-station function & automation linkup for advanced efficiency. Standardized wtih 3-column clamp, and available for 4-column clamp upon request.
模内标签
产品分类 : Labels & Shrink Sleeves & IML
模内标签(IML)，由于油墨被包覆于膜料中间，因此适用于食品容器上居多，一般均在无菌室或空调洁净室做加工，尽可能减少人员的碰触，为自动化、一次成形的容器涂装方式，只需将模内标签一同放入射出机械模具中射出，使标签与产品融合一体，使色彩保持亮丽，不易退色。
一步法射出吹气成型机-FS-IB60
产品分类 : 注塑中空成型机
鍑鑫一步法射吹机是高速精密的先进机械，结合射出成型机和延伸吹气成型机的概念而研发制造。将两种不同机型的特色及优点结合在一起，是一机多功能之先端科技产品，提供客户更多样化选择。
2RT开模轮胎胶囊专用橡胶射出成型机IRH-S2
产品分类 : 制鞋机
Mold opening design The 2RT surpasses the traditional top opening mold that can be used for the double or triple molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between. tyre bladder
DG-EP 系列 伺服马达驱动射出成型机
产品分类 : 自动注塑机
•于低速范围有极优秀之安定控制 •长时间高压的射出保压性能 •30ms高应答射出 •几乎与电动式射出机一样的电力消耗 •射出速度及压力闭回路控制，高度之成型安定性 •关模机构使用免润滑轴套＋黄油润滑系统
Rubber Injection Molding Machine - Direct Clamping JD-RH series
产品分类 : 橡胶注射成型机
Machine for natural, synthetic, oil resistant,heat resistant and reclaimed rubber.
ATOZ系列精密螺杆式射出机
产品分类 : 卧式注塑机
混合彩色注塑机120BS到300BS
产品分类 : 多色射出机
Several embedded injection processes on two barrels to inject two melts on different stages. Times or positions to create different layouts are found in molding parts.
VTOP 系列精密立式柱塞式射出机
产品分类 : 自动注塑机
● 专利模组化三合一可更换滑板设计，一机多用途● 可生产0.001-0.0001g精密射出产品● 专利IPIS可更换柱塞式射出系统，可模组化更换射出单元● 专利设计辅助进料系统，贮料跟卧式机一样精准● 柱塞式射出可大幅节省浇道塑胶● 两板直压式四缸锁模机构● 专利辐射式力学范本耐用30年● 安全光栅及安全门双重防护●智慧程式控制系统让射出更容易● 相对同规格机型，机台高度最低● 符合人体工学的工作台高度● 电脑控温气冷式油冷却系统● 精密节能油电伺服系统
3RT开模橡胶射出成型机IRH-S3
产品分类 : 雨靴注塑机
●开模设计3RT 架构特点在于超越一般传统前顶式掀模，可用于三层或四层模具之特殊功能，具有掀模及中层模具个别顶出之设计。此掀模功能具有分段掀模、分段中模顶出、连续掀模及中模顶出之软体设计，可依操作需求作调整。 ●入料系统特殊二段式入料设计，能使原料得到最佳排气效果，又不死料之功能。 ●射出量控制采高精密度德制光学尺设计，能准确的控制与计算射出量之大小。
SINGLE INJECTION MOLD
产品分类 : 注塑模具
Single Injection Molding is a standard process that YOMURA TECHNOLOGIES excels at. Our YangMei plant is equipped with a resin feeder system to increase yield rates for mass volume production. Material: TPR , PC, PC/ABS, ABS ADVANTAGES: Works with Complex Designs Has the Advantages of Both Plastic & Rubber Flexible & Soft Touch
雨鞋3D图协助讨论& ABS+CNC打样
雨鞋模具最令人头疼的部分就是【讨论】，过往是由2D草图讨论花纹，再拿参考的样品来辅助双方想像，然而雨鞋是由高变化曲率的曲面所组成，只由2D草图及样品辅助双方参考,想像必定会有出入，所以往往会造成模具已经完成之后，却又不断修改的问题发生，修改模具不仅耗时，且修改过的模具势必会影响其寿命以及品质。
Double injection molding machine – HDC series
产品分类 : 压板注塑机
The standard HDC series has two parallel horizontal injection unit to be able to produce a 2-color and 2 plastic material in a time to save time and increase the productivity. To equip Huarong’s patended rotary table, when the table turns, it is accurate on positioning and tilt-free, which Huarong promises the rotary table won’t fall down.
曲肘式伺服节能双色射出成型机(DCV 系列)
产品分类 : 卧式注塑机
• 多段减速机构有效消除转动惯量，采机械定位，转盘反覆转动定位。 • 转盘与转轴双重功能，机器上可以选用转盘转轴共用功能，达成一机两用的效率。 • 活动模板平衡设计，可依据模具重量调整活动模板运行时的水平度，不损伤导销，确保合模正位。 • 转盘平衡设计，有效达成模具平衡，不会严重下坠，确保模具妥善。
过胶头组(止逆阀组)
产品分类 : 螺杆与机筒
过胶头组为射成形最重要的零件之一，我们提供适合各种塑料的过胶头组。根据不同的塑料开发并且量身订作各种形式的产品。不论是熔射、喷焊或是PVD镀层等各项之产品都有相当完整的配套。
内曲肘塑胶射出成型机
产品分类 : 卧式注塑机
CNT 系列是第一代傳統機台的延伸指標。透過不斷的研發、改進、成長，締造CNT 系列擁有更高效率、更佳穩定的性能。為迎合更多客戶不同的需求， CNT 系列除了擁有標準型，更有昇級型的加強設計，譬如CNT-A 〈快速射出機種〉、 CNT-C 〈全閉迴路高應答高速射出成型機種〉、 CNT -S/SD( 高壓高速高剛性機種) 、 CNT 電木機和三迴路機種等。
Atos系列精密分模线柱塞式微射出机
产品分类 : 卧式注塑机
● 没有直浇道，更节省浇道塑胶● 可生产更精密、更微小的微射出产品● 产品可向模具中心点靠拢，模具可微小化● 两板直压式四缸锁模机构● 专利辐射式力学范本耐用30年● 智慧程式控制系统让射出更容易● 相对同规格机型，机台长度最短● 精密节能油电伺服系统
BMC专用射出成型机
产品分类 : 卧式注塑机
Common commissioning for molding products such as electric parts and auto headlamps with insulated characteristics. Steel and FRP plates are installed on the fixed and movable platens to insulate the heat generation from the thermoset mold.
一段两工位式射出吹瓶机- IB 系列
产品分类 : 注塑中空成型机
全机机构以泛用型射出成型机为设计蓝本，故无论操作、保养维护及换模工作只需具备一般射出成型之知识已足够应付裕如。设备价位合理，可降低生产者之机械及模具投资成本，提升市场产销之竞争力。
CE认证橡胶射出成型机IRH(CE type)
产品分类 : 雨靴注塑机
Material supply system A special design of two-stage material supply is adopted. It expels bubbles out of the raw material in the most effective way and there is no dead material.
