PRM-TAIWAN-塑胶机械与橡胶机械入口网

搜寻 - Energy

We have found 186 product types of Energy and 38 related suppliers. Get the most detailed machinery information and contact the manufacturers directly.
推荐厂商
Industrial Ultrasonic Humidifier KT-200/KT-300/KT-400/KT-600/~~KT-2400
Industrial Ultrasonic Humidifier KT-200/KT-300/KT-400/KT-600/~~KT-2400

产品分类 :

  1.By Ultrasonic, only mist given, no water spots.   2.Energy efficient, low power consumption.   3.Easy installation and operation.   4.With humidity control.   5.Automatic water filling, safety shut-off when no water.   6.Easy to maintain and clean.   7.Use clean and cool water, give the suitable humidity to  environment.   8.Ultraquiet-Noseless operation.   9.Adjustable nozzle for any required angles. 10.Widely use in Hospital, Pet Shop, Laboratory, Factory, etc...

Hot Needle Perforation Machine
Hot Needle Perforation Machine

产品分类 : 塑料制袋机

The MGR-HPR-1000 is Ming Jilee's hot needle perforation machine, designed to perforate BOPP, CPP, and PE film. The hot needle pins are imported from Europe, and the perforating system runs as a closed system that keeps hot air energy within the working area, keeping heating consumption down.A high-precision edge position controller and fully automatic tension controller keep film quality stable during operation, and pin design is customized down to a minimum pitch of 2 × 2 mm. For thin PE material, the heating system can be switched off so the needles mark small holes instead of perforating with heat. A special holding shaft lets operators remove finished rolls easily once a roll is complete.Model: MGR-HPR-1000Unwind width: 300 - 1000 mmRewind diameter: 600 mm (Max.)Pin design: customized (min pitch is 2 × 2 mm)Machine speed: 60 - 130 m/min (depend on material and design)Machine dimension: 4,200 (L) × 2,150 (W) × 1,960 (H) mmMachine weight: 4000 kgRequired power: 24.5 kw

淋膜机
淋膜机

产品分类 : 挤出涂布与复合机

Introduction The extrusion lamination machine is built for precise and stable production of flexible packaging films. Featuring a Japan-made extruder, T-die, and non-stop turret technology, it ensures accurate coating gauge control and enhances production efficiency. The machine's high-efficiency drying system, with a high-speed blower and exhauster, minimizes waste and ensures clean, high-quality film output. Applications Webcontrol Machinery Corp. engineers the FML-EXL Series for food packaging, industrial wraps, and agricultural films, with material width running from 750 mm up to 1300 mm. A 2-section drying system supports the line, and the unwind, auxiliary unwind, and rewind stations run at 800 mm, 600/800 mm, and 1000 mm. That range lets converters handle both food-grade barrier film and heavier industrial or agricultural film on the same machine. Ideal for extrusion lamination machine applications in food packaging , industrial wraps, and agricultural films Capable of handling various resins for high-precision and stable applications Customizable to ensure consistent, high-quality film production Features Energy efficient, reducing operational costs for extrusion lamination machine users Low maintenance for long-term reliability PLC system with HMI for smooth operation and minimal downtime Boosts production efficiency while minimizing material waste Specification Material Width 1300 mm Min. Material Width 750 mm Unwind Diameter 800 mm Auxiliary Unwind Diameter 600 / 800 mm Rewind Diameter 1000 mm Drying System 2 Sections Unwind Tension System Auto. Control by Dancing Roller Rewind Tension System Auto. Control by Dancing Roller Machine Speed 300 m/min. Webcontrol Machinery Corp. builds the FML-EXL Series Extrusion Lamination Machine on the same engineering base behind over 3,000 machines sold in more than 80 countries, all certified to CE (EU) and UL (US) safety standards. The line runs a Japan-made extruder, a precision T-die, and non-stop turret technology, holding operating speed at 300 m/min. That combination of mechanical systems and intelligent electrical controls keeps film lamination running at volume, with less waste and less downtime. Q: What keeps the FML-EXL Series running without interruption during long production runs? A: Webcontrol Machinery Corp. builds the FML-EXL Series around a Japan-made extruder, a precision T-die, and non-stop turret unwind and rewind technology. Together with a 2-section drying system, this holds the line at speeds up to 300 m/min while keeping material waste to a minimum. Q: What material widths and roll diameters does the FML-EXL Series handle? A: Webcontrol Machinery Corp. sizes the FML-EXL Series for material widths from 750 mm up to 1300 mm. The unwind station runs an 800 mm diameter, the auxiliary unwind runs 600 mm or 800 mm, and the rewind station holds 1000 mm. That range covers the roll sizes converters use across food packaging, industrial wrap, and agricultural film production.

桶专用射出机(SA-p系列)
桶专用射出机(SA-p系列)

产品分类 : 肘节式合模注塑机

为FCS全新发表之外曲肘油压伺服节能机种,为专门生产桶装容器的注塑机。锁模力涵盖220-1,000吨。

电晕静电驻极设备
电晕静电驻极设备

产品分类 : 无纺布生产线

This CORONA ELECTROSTATIC TREATER is used to turn materials such as melt-blown fabric (face mask sheet),non-woven fabric (non-woven sheet) and polymers into electrets. The equipment includes a high-frequency inverter power supply, special electrodes and rollers. Through the mutual control of these components, the electret material can deeply capture the charge energy, and maintaining the polarization for a long period. This equipment can be used for application such as turning melt-blown fabric, non-woven fabric (non-woven fabric) and air filter into electret. It greatly increases the filtration efficiency of the filter material by capturing tiny particle which is smaller than filter density. More importantly, this CORONA ELECTROSTATIC TREATER helps melt blown fabric increase 45~65% of filtration efficiency and turns it to the most important layer for medical face mask such as N95, KN95 etc. to reduce infected by corona virus COVID-19. Note: An electret is a material that almost remains electric polarization permanently and is able to generate an electric field in the surrounding area. The electret strength will last longer when corona electrostatic charges deeply by high voltage and frequency.

Mini Type Blown Film Machine
Mini Type Blown Film Machine

产品分类 : 吹膜挤出机

Designed for T-Shirt bag and flat bag production Small occupancy of space Simple, flexible and economic operation High output and saving energy Also can work with LDPE resin if changing air ring Film thickness HDPE 0.008~0.06 mm

双螺杆PET捆扎带挤出生产线
双螺杆PET捆扎带挤出生产线

产品分类 : 纤维、单丝与扁带挤出生产线

PET打包带行业的先进挤出机设计。高品质和稳定的成品。

食品级 PET 瓶回收清洗生产线
食品级 PET 瓶回收清洗生产线

产品分类 : 按应用分类的回收生产线

-挤出机特点: 这种新的挤出系统将平行双螺杆挤出机熟悉的优异增塑和均质性能与圆锥形双螺杆系统的特殊优势结合在一起。螺杆配有易于更改的剪切和混合元件,可根据每种需求精确地调节塑化。通过真空泵进行有效脱气,可去除增塑单元前部的单体 •进料段大/进料性能好 •锥形设计确保非常好的螺桿填充 •因此,螺杆每转的输出功率高(kg / rpm) •由于螺杆直径较大,可能产生高扭矩 •非常稳定的压力保證質量 •旋转系统提供出色的均质化 •出色的喂食性能 •处理单元内部的熔体停留时间分布小,  •低熔融温度; 低能耗 -SSP的功能: 在SSP工艺中,PET颗粒被进一步净化,其分子量增加,从而获得了高质量的瓶级切片,符合各国的法规和包装行业的要求。  SSP和迁移物质的去污是扩散控制的过程,主要设计参数是产品温度和停留时间。 必须通过固态缩聚工艺(SSP)才能将无定形PET颗粒的分子量提升到高质量的瓶级切片,这符合FDA的法规和包装行业的要求。 •特别适用于没有聚合设施的第三世界国家的中小企业。 •高I.V. 芯片下游用户 •性能稳定,经济投资和高C / P值。 •清洗线的长期经验和质量控制方法将为连续稳定地供给造粒和SSP的PET瓶片提供卓越而稳定的质量。 •节能环保:在洗涤过程中可将造粒和SSP产生的热能再利用

有轴式干式贴合机
有轴式干式贴合机

产品分类 : 工业复合/覆膜机

气压轴式收料座 - 平滑轮 平滑轮是由空气压缩机操作 指数操作可提供细微的校正接点,使接触的位置容易显示 平滑轮与压力轮分别在材料两端同步运转上升 - 烘箱 干式贴合机有三个8.1米的烘箱 第一烘箱位在右边利用V行喷嘴使热气均匀喷出 第二和三烘箱位于左边利用多孔版来高效能烘干 - 独立马达装置 由独立马达来驱动涂胶轮和带胶轮来避免因为打滑而造成涂胶不平均 - 快速更换欧式套筒 - 双层胶锅: 空气吸入装置是外层配备,用于抽吸溶剂的气味,避免气味飞溅 - 开放式刮刀 - 封闭式刮刀 没有胶水溅出当机器在高速操作时 最小溶剂气味 方便安装和清洁 最低液体粘度的变化 刮刀寿命长

无轴式干式贴合机  DL-S1000/S1300
无轴式干式贴合机 DL-S1000/S1300

产品分类 : 工业复合/覆膜机

機器的目的 - 塑膠貼合 - 軟包裝轉換

Intermesh Dispersion Kneader Mixer For Rubber And Plastic
Intermesh Dispersion Kneader Mixer For Rubber And Plastic

产品分类 : 橡胶混炼设备

The new technology design of this dispersion kneader is equipped with a unique engage-type rotor for mixing/kneading rubber / plastic compounds with different characteristics. The special features are as follows: Fast mixing time. 3-8 mins / batch (depends on different material characteristics, feeding time,cleaning time, and so on) It is specialized for materials requiring low temperature, high oil consumption, and materials with very low hardness, ensuring homogeneous distribution and the highest degree of dispersion mixing. Construction of machine is strong and stable, with no shaking during mixing processes. Accurate temperature control system. Efficient cooling system. Can be applied for different composite materials. Pressure lid is driven by oil hydraulic system which can be adjusted to reduce energy consumption.

三机一体除湿干燥机( DHC-NA )
三机一体除湿干燥机( DHC-NA )

产品分类 : 塑料材料干燥机和除湿机

同时具备干燥、除湿及自动输送三大功能,经济又实惠。 运转低噪音,提升环境品质。 附有工作轮,可随需求移动, 机动性高。 结构紧实、体积减少,提高空间使用率。 整合干燥、除湿功能结构,降低耗能,节能又减碳。 空气滤清器、抽空装置不用工具即可拆卸,保养容易又省时。 料斗干燥机采白铁材质,筒内不残留原料,且附清理门,清理容易。 获台湾及大陆专利。