English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Pulverizer
产品分类 : 破碎、粉碎和造粒设备
The complete set is very suitable for the hi-speed blending of plastic powder and pellets for making plastic floor tiles, wall tiles wire, cable, FRP doors & windows and Christmas trees.
Water Tower Descaling Machine
产品分类 : Cleaning Equipment
The MIZUKEN water tower descaling machine is designed for water towers and cooling towers. It uses high-frequency and variable-frequency principles to dissolve scale and rust. Positively charged ions (Ca2+ and Mg2+) flow out with the system's circulating water and are adsorbed by the descaling machine's outer electrode mesh (negative electrode), where calcium and magnesium compound crystals form. This removes the primary scale-forming factors (Ca2+ and Mg2+) from the system, reduces water hardness, helps keep the system cleaner, and addresses scale in the circulating-water system at its source.
JB-CD Latex Condom Dipping Machine
产品分类 : 橡胶浸渍成型机
Condom manufacturing machine process Collecting the raw materials Rubber latex is obtained from the milky fluid produced by various tropical plants. Latex is actually an emulsion or dispersion of tiny rubber particles in water, and ingredients added to the latex must be able to attach to the rubber particles during compounding. Compounding Next, chemical additives are mixed to form a paste. This paste is then blended with the liquid latex in a process called compounding. Storage The latex and chemical compound is then unloaded into drums for storage, where it remains for approximately seven days. During this period, vulcanization chemically strengthens the bonds of the rubber. The storage time also allows any air, which might have been trapped in the mixture during compounding, to escape. Dipping The compound is then added to the dipping or condom-forming machine. The dipping machine is a long, hooded machine approximately 100 feet (30.5 m) in length. Thick tempered glass rods move along a closed belt between two circular gears. The belt drags the rods, which are called mandrels, through a series of dips into the latex compound. The mandrels rotate to spread the latex evenly. Several coats are required to build the condom to its required thickness. Between each dip, the latex is hot air dried. After the final dipping and drying, the condoms automatically roll off the mandrels. A machine shapes and trims the ring of latex at the base of each condom. Tumbling Next, the condoms are put in a tumbling machine, where they are coated with talc or another similar powder to prevent the rubber from sticking to itself. Testing After a curing period of several days, the condoms are sampled by batch and tested for leaks and strength. The first such test is the inflation test, in which the condom is filled with air until it bursts. Condoms are required to stretch beyond 1.5 cubic feet, about the size of a watermelon, before bursting. This test is considered most important because the elasticity of the condom keeps it from tearing during inter-course. In the water-leakage test, the condom is filled with 10 ounces (300 ml) of water and inspected for pin-sized holes by rolling it along blotter paper. Condoms are also tested electronically. This involves mounting each condom on a charged stainless steel mandrel. The mandrel is passed over by a soft, conductive brush. If pin holes are present, a circuit will be established with the mandrel, and the machine will automatically reject the condom. Packaging Condoms that have successfully passed these tests are rolled by a machine. Rolling the condom makes it easier to package and use. Lubricant and spermicide may be applied by a metering pump just before the top wrap is added in the foiling process.
Moldpro Temperature Controller – Key Features
产品分类 : 流道系统
(1) Synchronized Heating: On startup, the software identifies the hot plates and activates synchronized heating, where faster-heating zones follow the slower ones, so all zones reach operating temperature at the same time. (Invention patent granted) (2) Over-Temperature Protection: If temperature rises 30°C above the set point and is out of control, the system sounds an alarm and cuts power to prevent fire and resin carbonization inside the runner. (3) Under-Temperature Alarm: If temperature falls 30°C below the set point and is out of control, the system sounds an alarm. (4) Auto Zone Detection: Automatically detects the number of zones on startup and powers them on, with no need to activate each zone manually. (5) Compact Design: 4-, 6-, and 8-zone controllers are only about the size of an A4 sheet, saving valuable floor space. (6) SCR Power Output: SCR phase-angle power output effectively protects the hot runner heating system. (7) Heater circuit fault detection. (8) Thermocouple open-circuit detection. (9) Thermocouple reverse-connection detection. (10) Instant Alarm: The system immediately sounds an audible alarm upon detecting any abnormality. (11) Optional valve gate control. (Patent pending) (12) Optional auto power-off when the injection molding machine is idle for an extended period. (Patent pending) (13) 2-year warranty (excluding fuses and damage caused by human error). (14) Product Liability Insurance: Covered by NT$20 million product liability insurance (Taiwan only). Warning: High voltage. Do not open the controller housing. (Covers bodily injury attributable to Moldpro products; actual compensation may differ from the insured amount.)
DFEF Series
产品分类 : 传动、电机与驱动系统
