English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
高精度四柱式油压裁断机CSS-603
产品分类 : 切割机
本机由压系统采用先进而耐用的特殊回路以及稳定性高的电控系统，可达超水准的效能。上下冲压行程由四大钢柱代替滑轨，前后送料采用精密线性轨道。机械启动后，低噪音、动作敏捷、轻巧，利于楼层厂房设计。有高度精度的裁斩深浅（微调）刻画调整器，精度容许值0.008mm。特殊平面钢板，代替传统式钻板，永久不磨损，刀具使用寿命长，永保锐利，提高工作效率。加工物件可全断及半断，背胶式物件亦可使用，产品无须边。可选购加装自动冷却系统及全自动裁断深浅装置。本机有安全防护装置，可确保人机安全。高精度的机体结构，可作全断及半断加工。上下冲压行程采用四柱高刚性导柱，送料机构采用线性轨道。两断式压力控制，动作轻巧，低噪音，适合楼层厂房使用。自动调刀机构，依设定自动调整，精度0.01mm（选配0.001mm）。高精度德国钢版，耐用度高，永不磨损。本机采用先进且耐用的油压系统及电控回路。安全防护装置，确保人员安全（可选配CE架构）。
直压式伺服节能射出成型机 (HCV 系列)
产品分类 : 卧式注塑机
• 新一代的直压锁模机构设计，一体成型高压缸，搭配插装式满油阀机构，钢体强度佳，机械寿命长，起压反应快速，开锁模动作快速稳定，确保精密成型。 • 全机电阻尺位置控制，操作简易且精度高。 • 采用高效率日本伺服马达(DAIKIN SUT SYSTEM)具压力、流量、回馈装置，达全闭环回路伺服控制，应答性0.07秒以内，再现性1%以下，直线性1%以下。 • 对角式双射移设计，受力平均，射台鞍座采用高精密度线性滑轨减低机械损耗，确保精准射胶动作。 • 储料背压采比例式控制。 • 螺杆、料管经电离子氮化处理寿命特长。
油电混合式中空成型机- CM-HB 系列
产品分类 : 电动中空成型机
为因应省电节能及耐操好用的采购需求，嘉明积极研发省能源且兼具实用性的油电混合式中空成型机。具有全电式定位快速、精准及省能源的特性，也保有油压结构高推力的特性，不但低于全电式成本，而且能有效改善传统油压耗能源的问题，满足客户品质、速度、精密与稳定的高质化经济效益。
HTAC Burners (High Temperature Air Combustion)
产品分类 : 加热与热控系统
The HTAC Burner Series represents a new generation of high-temperature air combustion technology, developed by Supertec to improve energy efficiency and reduce emissions in industrial kilns and furnaces. Designed especially for brick and ceramic production, these burners use preheated air up to 500 °C recovered from the kiln’s cooling section, drastically reducing fuel consumption and CO₂ emissions while ensuring homogeneous heat distribution.
Moldpro Temperature Controller – Key Features
产品分类 : 流道系统
(1) Synchronized Heating: On startup, the software identifies the hot plates and activates synchronized heating, where faster-heating zones follow the slower ones, so all zones reach operating temperature at the same time. (Invention patent granted) (2) Over-Temperature Protection: If temperature rises 30°C above the set point and is out of control, the system sounds an alarm and cuts power to prevent fire and resin carbonization inside the runner. (3) Under-Temperature Alarm: If temperature falls 30°C below the set point and is out of control, the system sounds an alarm. (4) Auto Zone Detection: Automatically detects the number of zones on startup and powers them on, with no need to activate each zone manually. (5) Compact Design: 4-, 6-, and 8-zone controllers are only about the size of an A4 sheet, saving valuable floor space. (6) SCR Power Output: SCR phase-angle power output effectively protects the hot runner heating system. (7) Heater circuit fault detection. (8) Thermocouple open-circuit detection. (9) Thermocouple reverse-connection detection. (10) Instant Alarm: The system immediately sounds an audible alarm upon detecting any abnormality. (11) Optional valve gate control. (Patent pending) (12) Optional auto power-off when the injection molding machine is idle for an extended period. (Patent pending) (13) 2-year warranty (excluding fuses and damage caused by human error). (14) Product Liability Insurance: Covered by NT$20 million product liability insurance (Taiwan only). Warning: High voltage. Do not open the controller housing. (Covers bodily injury attributable to Moldpro products; actual compensation may differ from the insured amount.)
