English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Hot Needle Perforation Machine
产品分类 : 塑料制袋机
The MGR-HPR-1000 is Ming Jilee's hot needle perforation machine, designed to perforate BOPP, CPP, and PE film. The hot needle pins are imported from Europe, and the perforating system runs as a closed system that keeps hot air energy within the working area, keeping heating consumption down.A high-precision edge position controller and fully automatic tension controller keep film quality stable during operation, and pin design is customized down to a minimum pitch of 2 × 2 mm. For thin PE material, the heating system can be switched off so the needles mark small holes instead of perforating with heat. A special holding shaft lets operators remove finished rolls easily once a roll is complete.Model: MGR-HPR-1000Unwind width: 300 - 1000 mmRewind diameter: 600 mm (Max.)Pin design: customized (min pitch is 2 × 2 mm)Machine speed: 60 - 130 m/min (depend on material and design)Machine dimension: 4,200 (L) × 2,150 (W) × 1,960 (H) mmMachine weight: 4000 kgRequired power: 24.5 kw
ELECTRONIC BRAKE
产品分类 : 传动、电机与驱动系统
The Electronic Brake is from Italy, Europe, which used on the unwind system to slow down the speed to control web tension.
重包装材料凸版/胶版印刷机HY-GP5000
产品分类 : 编织袋印刷机
特别设计于印刷编织袋膜卷和牛皮纸袋等重包装材料，机身采用大的铸铁加粉体烤漆，放料自动张力控制和对边控制系统，卷对卷连续印刷更稳定和快速的生产量，在原料进印刷座前附有香蕉轮帮助膜料延伸的更平整，标准配备天车链条式协助更换原料和下放印刷好的原料。
Accumulator Head Blow Moulding Machine ABI-125L
产品分类 : 挤出中空成型机
FKI为行业提供最实用的蓄能器头吹塑机，应用范围广泛：烹饪油容器：10至30升化学品使用的容器罐：10至60升开口桶：30至220升闭口盖L环桶：120〜220升，IBC，风管，汽车部件，工作台，工具箱，水箱，家具板等各种规格的空心型材。
同向双螺杆进料机
产品分类 : 计量和测量设备
PSB 系列--同向双螺杆进料机是PSM同向双螺杆押出机的重要周边设备，由弘煜机械有限公司以多年实务经验设计制造。 PSB同向双螺杆进料机设有大型入料口，可顺畅入料。其螺杆有共轭、非共轭等多种型式，可依照所加工之原料形态及物性的不同，选择适用的螺杆，且螺杆的更换快速方便。配置同向共轭型双螺杆时，会具有强大的正位移动输送能力，及螺杆自清功能，亦具有进料量高、进料稳定等特点，加上其良好的排气效果，特别适用于各种粉未型、潮湿型、低摩擦系数型及粉粒混合型等塑胶原料或辅料的进料。如配置单头、T形螺纹、非共轭型螺杆时，因其具有较深的螺槽和较宽的螺槽容积，可广泛适用于各种粒状、片状、纤维状及粉状物料的增量输送。 PSB进料机通过下料管与本公司出产的PSM同向双螺杆押出机的主进料口联接，亦可依客户需求配合至其他厂牌的押出机使用。此外，依据实际加工制程或客户要求，还可增配预混装置、震荡装置和加热及冷却装置，以符合实际制程之需要。
BH 系列 - 单轴撕碎机
产品分类 : 破碎、粉碎和造粒设备
BH系列单轴撕碎机是大型撕碎设备,适合高产量大规模撕碎粉碎各种物料，尤其适合大尺寸或高硬度物料(如厚壁管,托板,周转箱,薄膜,编织袋,轻金属等)，大容量料斗和料仓配合卧式平推系统最大限度发挥其撕碎高硬度大尺寸物料的优越性。根据物料类型该系列撕碎机产量大约在1500公斤/小时至12000公斤/小时之间。
Single Screw Pelletizing Extruder | CK-HS
产品分类 : 单螺杆挤出机
CK-HS series Single Screw Extruder can be applied to wide applications, e.g., masterbatch, compounding, and recycling. The screw rotational speed is second only to our CK-DHS high-throughput series. Possible materials : PP, HDPE, LDPE, PS, ABS, ABS & PC, PC, PA, PET, PBT, etc. Extruder screw : The extruder screw of CYKF’s single screw extruder is customized to satisfy different material formulations. The optimal configuration of screw zones ensures high-efficiency extrusion performance. The strict quality management guarantees good quality and long service life of this critical component. Die : The die material and mold runner must be selected and designed according to the physical properties and characteristics of plastics to avoid occurrences of uneven material flow rate, retention, excessive molding pressure, in-mold temperature increase, decomposition and carbonization or other situations that may damage material properties of plastics.
高速底部飞刀系统伺服电机控制封袋机制
产品分类 : 塑料制袋机
‧ Flying knife design, controlled by servo motor. ‧ Germany made photocell-SICK for accurate printed mark. ‧ Automatic lift up reel unwinder with air shaft, reducing the number of empoyees. ‧ Automatic tension control with Japan made inverter system for each line. ‧ Auto stop when film finish or broken. ‧ Collecting conveyor system will be easy for worker to collect bags.
Belt Type
产品分类 : 计量和测量设备
Loss-In-Weight Feeder is a precision feeding device designed specifically for handling granular or free-flowing powdered materials. Utilizing advanced technology, this feeder is capable of delivering maximum accuracy at minimal feed rates, meeting the precise ingredient requirements in different industries.
Ultrasonic Module for Food industry-Ultrasonic Food Cutting Module
Auto Frequency Tuning Ultrasonic System
Co-Extrusion Cast Film Line For Food packaging
产品分类 : 薄膜和片材挤出生产线
Co-Extrusion Cast Film Line for Food packaging
全自动高速一次性塑胶手套制造机-SSD-800-HGL (Standard)
产品分类 : 制袋机按用途
-全程电脑控制-全程生产不停车-无原料时、塞料异常时自动停车-自动撕下边缘废料装置-融断(无切刀)系统,节省时间与调整封刀的人力-可制造三种样式的手套
高压液体注料机-PSX
产品分类 : 专用机零配件
PSX系列--高压液体注料机，是弘煜机械有限公司为塑橡胶或食品药品在混炼制程中，需要高压注液功能而特别设计制造的，为PSM双螺杆押出机在混炼押出过程中极为重要的外围设备。
全自动背心式与平口式垃圾袋制袋折叠机
产品分类 : 塑料制袋机
1. 主机伺服马达，德国施克电眼追踪，送料精确流畅。 2. 背心冲口与切袋同步进行，速度快，切口整齐，底封县和袋底之间没有多余切口。 3. 根据需要调整计数设定，一次同时折叠多张袋子。 4. 可依据需要调整折叠次数，2折、3折、4折或5折均可。 5. 第一第二折袋通过伺服控制，时间精确。速度提高，不再出现抓袋时间不准而造成的掉袋现象。
欧化除湿干燥送料组合SCD
产品分类 : 塑料材料干燥机和除湿机
SCD系列欧化除湿干燥送料组合集除湿、干燥、二段送料三种功能于一机，特别适用于吸湿性较强的工程塑料原料如：PA、PC、PBT、PET等，其中光学级-OP机型可用于镜片、LCD的背光板及光碟片等光学级产品的制程应用，并提供蜂巢转轮供使用，在理想状态下最低可达-40℃以下的露点。
铝箔专用涂布贴合机(WACL-1300)
产品分类 : 工业复合机
WACL-1300系列机台有别于一般干式贴合机，针对于冷冲模比较厚的复合材料，需要比较精准以及适当的张力控制， 所以此机台是为了冷冲膜类产品设计，干燥烘箱内铝导轮以马达带动，并与机台速度同步，薄膜也以极低的摩擦力通过，大幅度的降低表面刮痕。另外，烘箱内也配备LEL的气体浓度侦测装置，当在生产途发生溶剂气体浓度过高的情形时，系统将会大量地自动将废气排出。此机型可以同时进行预涂布及热封胶正反两面涂布功能。另外涂布单元可以更换凹板或三轮式涂布系统，涂布推车内含循环系统，可以快速更换及方便清洁。
伺服系统抗静电袋制袋机
产品分类 : 塑料制袋机
该系列制袋机专为生产静电防护包装袋所设计，所生产之抗静电袋适用于各种电脑组件之EDS防护包装如主机板、电路板及对静电敏感之电子产品。系列机型： FSC-503-1, 603-1, 803-1 抗静电袋制袋机
Rotary dosing heading machine RDH 60-02
产品分类 : 旋盖机
1. Minimum required floor space due to the compact construction. 2. Rapid tooling changeover time due to small number of easily exchangeable size parts 3. Low investing costs
High Speed Double Line Shrink Label Cutting Machine
产品分类 : 切割机
This FSC-XD301 is the next-generation ultra-high-speed dual-line shrink label cutting machine, designed to deliver a perfect combination of efficiency, stability, and accuracy, setting a new standard for high-performance production equipment.
PC 圆柱型自载位线性位移传感器
产品分类 : 传感、监控与检测设备
由于具有高坚固性和高准确性，它适用于各种机械应用和车辆开发，是自动控制和机器人技术应用的最佳解决方案。( 弯管机、打磨机、土方搬运 )
废旧轮胎回收分解系统
产品分类 : 破碎、粉碎和造粒设备
预碎系统设备可选镶嵌式刀具，大幅降低该工序的生产成本 粉碎和钢丝研磨清理相结合的二步齿式切裂系统高效分离橡胶和钢丝 双磁场钢丝分离系统最大限度减少钢丝的含胶量，提高钢丝品质 细碎系统为特殊设计的斜面阶梯剪切结构，配合高品质的合金钢刀具，提高剪切效率，降低维护频率 采用多点纤维除尘，在系统的多个模块中将纤维和粉尘逐步去除；中央脉冲除尘系统将生产过程中产生的粉尘统一收集，排放量小于8毫克/立方，符合国标GB/Z2.1-2007 可装载隔音系统，将设备噪音控制在85分贝以内 系统模块化设计，可根据生产要求扩大或添加功能模块 系统配有喷淋防火系统，确保安全生产 整线自动化控制，系统各单元之间关联运作，将产能最大化的同时对可能出现的异常情况有预判功能，最大限度确保系统安全
密封式高速混合机
产品分类 : 橡胶搅拌机
This Intensive Mixer is designed for mixing compounds and specific plastic. The structure of the machine consists of the main air cylinder, floating weight, feeding door, mixing chamber, rotors and discharge device. When performing mixing compound operations, the material and ingredients are fed together into the mixing chamber. The material in the mixing chamber is repeatedly sheared and squeezed by the rotors. This provides a series of chemical rotations between the material and the ingredients, which enables the material pieces to stick together into a paste mass shape. Mixing compound operations are performed according to the set temperature and conditions. This specially designed mixing machine provides efficient mixing and refining for a wide range of raw materials, such as raw rubber, resins, asphalt, cellulose, PVC ane EVA…etc.
伺服控制边封鸡袋专用机
产品分类 : 塑料制袋机
High Speed Side Sealing Chicken Bag Making Machine with Servo Motor Control Model: CWSS+C+SY-500-SV
Thermal Laminating Machine TL-800
产品分类 : 工业复合机
This Pack Ready laminating machine is designed for digital printing application. It utilizes thermal lamination technology to provide strong laminating bond strength with no adhesive and zero cure time for immediate converting. Pack Ready can be said a revolution for flexible packaging industries and promises to shorten time, lower cost and waste.
Hinged Container EG-66
产品分类 : Rigid Packaging & Containers
Product Number: EG-66 Color: Natural Material: Fiber Shape: Clam shell
双面押出淋膜机(YSJ)
产品分类 : 挤出涂布机
● Working Material: BOPP film, CPP film, PET film, Cellophane, Aluminum foil, Paper, Non-woven fabric, PE film, Nylon film ● Resin: PP / LDPE / LLDPE / EVA / EAA / SURLYN
8 COLORS FLEXO PRINTING MACHINE (HIGH SPEED TYPE)
产品分类 : 柔版印刷机
Our machines are suitable to print PP, PE, BOPP, OPP, PE shrinkable film, packing paper, glass paper, non-woven bags. Using hydraulic system to lift up & down the printing cylinders for easy operation. Equipped with meter counter, the machine will stop automatically when reaching the meter. Using high-capacity hot air dryer to make the production faster. The dryer and fan will shut down automatic when machine stops. When machine stops, the ink rolls keep running to avoid drying of ink. The rubber roller is ozone-resistance & solvent-resistance. The ink tray is with cover & faucet. Ink pump, air shaft, ceramic roller & doctor blade etc. are options.
多通道风选机
产品分类 : 按应用分类的回收生产线
This product is a new label separator developed by Boretech. The principle is to make use of the different aerodynamic characteristics of the flakes and the label.Relying on the negative pressure air flow generated by the centrifugal fan, it can accurately and quickly separate the label and other light impurities in the PET flakes. Scope of application: 10-16mm PET, PP, PE flakes Material status: dry material or wet material
