搜寻

2.7M输送带式水洗机 (含电热管) - JK-270T

产品分类 : 水文/水传输机器

均匀分布在水洗区的高性能喷嘴能360度、完全地将转印物件上残余的PVA膜及活化剂清洗干净。 利用输送带式的高产出，再加上100%的水循环，让你的水转印加工更加有效率

大搅拌轴强力加压利拿式密练机

产品分类 : 分散捏合机

此机械除同标准型适用于各种橡胶、塑胶及化学工业之掺配料之混合及捏练.大搅拌轴更适合于低温混练的原料. 此机械由于特殊设计及制造之结构以达到下列之特性: 良好之分散性及均匀性.操作简单方便.换色容易.更能缩短混练时间,超强热交换能力,可达成A/B练及一次性混练.

PP Woven Bag Conversion Line - JLGCSM SERIES

产品分类 : 编织袋制袋机

Equipped two servo motors Equipped bag transfer grippers Display screen operation interface

E-1 智慧型变压器自动电压调节器 / 稳压器 (PS-B型)

产品分类 : 电子、自动化和安全组件

针对电压调节与电压转换进行专业设计，可将三相 380V 转换为三相 220V，容量介于 12 至 15 kVA 之间。本设备最适合配套外销之精密机械设备使用。PS 系列智能型机种之控制与机构设计，集电压转换、自动稳压、报警及安全保护功能于一体。

全电式精密伺服冲型裁切机 (模切机)可加装CCD定位系统

产品分类 : 切割机

应用范围：光电薄膜, 塑胶薄膜，如ITO, 扩散片、反射片、增亮片…软性PCB, 复合材料等. 可裁切而不脆裂之材料。镒群

废塑料回收机 - WTS系列

产品分类 : 按应用分类的回收生产线

WTS85, WTS100, WTS120, WTS150

密封式高速混合机

产品分类 : 橡胶搅拌机

This Intensive Mixer is designed for mixing compounds and specific plastic. The structure of the machine consists of the main air cylinder, floating weight, feeding door, mixing chamber, rotors and discharge device. When performing mixing compound operations, the material and ingredients are fed together into the mixing chamber. The material in the mixing chamber is repeatedly sheared and squeezed by the rotors. This provides a series of chemical rotations between the material and the ingredients, which enables the material pieces to stick together into a paste mass shape. Mixing compound operations are performed according to the set temperature and conditions. This specially designed mixing machine provides efficient mixing and refining for a wide range of raw materials, such as raw rubber, resins, asphalt, cellulose, PVC ane EVA…etc.

斜臂式机械手臂-Phoenix 系列

产品分类 : 工业机器人

纵走式机械手 - VA系列

产品分类 : 工业机器人

M6 系列数位式熔体压力计 - 带4-20mA输出

产品分类 : 指示器和传感器

M6系列采用五位数超大显示屏，实现更佳数显效果。 M6系列熔体压力计提供局部压力指示，性能可靠且无需维护。 表中的毛细管充填了特殊介质，可以隔离壳体，避免潜在的热损伤。

钓鱼网拉舍尔机

产品分类 : 工业针织机

配备1个闩锁针杆。 6根地面导向杆（设置为1 in-1 out），2个花样导向杆（用于织边），1个组合式梳理杆，1个缝制梳形杆

独立凸版/胶版印刷机FSP-S6000-1300

产品分类 : 柔版印刷机

Single unwind and rewind station, both with auto tension control, the main driving system is a.c. motor 5hp, every printing station with individually ink rotating motor 1/4 hp，machine equipped with the crane system 2 sets can help for the raw materials and heavy printing roller changes. Films go to the printing station with the banana roller to spread the films much even, and printing station with individually drying pipe providing the printed films for the primary drying, machine with t5 working light keep the working place very bright, upper side with overhead big drying chamber enlarge heating capacities cooperate with the blower ensure the films can be dried accordance with high speed.