English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
双筒型除湿干燥机
产品分类 : 塑料材料干燥机和除湿机
专利的双筒型设计，让进入除湿筒中的潮湿风可达到更好地除湿效果，同时利用交换座可以使两个除湿筒交换使用。能够达到降低耗电量、节约能源之目的。本机型适合搭配处理能力较大之料斗干燥机设备。
聚酯长丝生产解决方案(POY/FDY)
产品分类 : 长丝与纱线挤出生產线
宝绿特从2007年开始提供PET瓶片给再生长丝工厂进行直接瓶片纺丝，深刻的理解纺长丝的瓶片质量标准，也积累了大量的再生纺长丝的相关经验。结合中国当地的设备供应环境以及宝绿特的工程能力，国际化项目实施经验和能力，宝绿特可以给客户提供最完整的项目方案。 宝绿特台湾工厂多年的环保长丝级再生切片生产制造经验，解决了环保细旦长丝生产的最大问题，确保产品质量的稳定性。
横走式五轴伺服机械手ST5-S2
产品分类 : 自动化、机器人与软件
该系列机械手主要用于注塑成型时成品及水口料的取出。分为单截式与双截式供客户选择，以适用于二板模、三板模或热流道模具。能实现各种特殊动作，如排列、堆放、品检和埋入等。适用于锁模力在3600T以下的射出成型机。
Bottom Sealing Bag Making Machine Biodegradable Material(GF-A/SV Series )
产品分类 : 切割机
The GF-A/SV Series is a bottom sealing bag making machine configured for biodegradable material. It is the biodegradable-film version of JANDI'S GF-A/SV knife-cutting bag makers: tubular film is fed through a servo-driven machine that seals the bottom of each bag and cuts it off with a knife, producing flat bottom-sealed bags from PLA and PBAT based compounds.The GF-A/SV range is built in single-deck and multi-deck configurations, with the number of lines and the cutting width chosen per model, and the biodegradable version follows the same layout. Cutting width, cutting length, film thickness range, number of lines and production speed are confirmed with the buyer at quotation.Type: bottom sealing bag making machine for biodegradable material, GF-A/SV SeriesMaterial: PLA and PBAT based biodegradable filmServo driveKnife-cutting, bottom sealingSingle-deck and multi-deck configurations in the rangeNumber of lines and cutting width per modelCutting length, film thickness and speed confirmed at quotation
粉碎水洗干燥整厂设备-块状塑料专用
产品分类 : 破碎、粉碎和造粒设备
适用于各种类块状塑料 清洗后的塑料，经卧式脱水机去除水分的水分残余量约1-3% 整套电器设备采连动保护线路以策安全 由原料的干净程度来决定沉浮槽的数量一、二或者三个
P.P. HIGH SPEED PLASTIC INFLATION MACHINE : KPP-45/55
产品分类 : 吹膜挤出机
The KPP-45/55 is a high-speed P.P. plastic inflation (blown film extrusion) machine available in two widths — 400 mm (KPP-45) and 520 mm (KPP-55) — for applications such as plastic garment bags.The KPP-45 runs a Ø 45 mm screw (28:1 L/D ratio) with a 15 HP AC driving motor, a Ø150 mm die, and a Ø250 mm air ring; the KPP-55 runs a Ø 55 mm screw with a 20 HP AC driving motor, a Ø250 mm die, and a Ø350 mm air ring. Film thickness is 0.02-0.1 mm for the KPP-45 and 0.025-0.1 mm for the KPP-55, with output of 18-25 kgs/hr and 22-45 kgs/hr respectively.Model: KPP-45 / KPP-55Suitable material: P.P.Film thickness: 0.02-0.1 mm (KPP-45) / 0.025-0.1 mm (KPP-55)Film width range: 400 mm (KPP-45) / 520 mm (KPP-55)Film output: 18-25 kgs/hr (KPP-45) / 22-45 kgs/hr (KPP-55)Screw diameter/type: Ø 45 mm / Ø 55 mm, L/D ratio 28:1Driving motor: AC 15 HP (KPP-45) / AC 20 HP (KPP-55) + InverterMachine dimension: 400x120x370 cm (KPP-45) / 450x180x425 cm (KPP-55)
