低压电气比例阀(0-8bar)

分类: 压力比例阀

高鹿兴业有限公司

国家: Taiwan

电话: +886-4-24874219

传真: +886-4-24864269

联络人: Jerry Wu

影片马上询问

产品型号: QKL-B1T/QKL-B3-1/QKL-B3-1A

此为一个闭回路设计，由两个电磁阀、压力传感器以及电子回路控制所组成。

根据接收到的模拟讯号输入，由一端电磁阀用来控制进气量，与另一端电磁阀来控制排气量，透过压力传感器测量得到并回馈于电子回路控制，以达到精确的压力比例控制，该比例阀适合针对随时需要精准调控压力变化，与监控压力值的产业。

比例阀输入信号提供了0-10VDC(电压) 与 4-20mA(电流) 及 RS485 ModBus 通讯选择。监控输出则有 1-5V、0-10V及4-20mA 的选择。B1T、B3-1、B3-1A 系列为内部压力传感器 B2T、B3-2 系列为搭配外部压力传感器 (※适合用于远程造成压差的环境条件下)压力比例阀，除了会自行调控达到恒压以外，还能回馈参数到机台上做监控，排除压力值不准或压差造成的震荡问题。

本产品皆符合CE认证、SGS、RoHS、ISO13485 等认证。

产品特色 Features

◆ 体积小 Compact

◆ 精度高 High Precision

◆ 灵敏度高 High Sensitivity

◆ 广泛的压力范围 Wide Pressure Range

产业应用 Industrial application

◆ 雷射切割 Laser Cutter

◆ 泄漏测试 Leak Tester

◆ 张力控制 Tension Control

◆ 吹瓶机产品成型 PET bottle molding machine

◆ 多段压力控制 Multi-Stage Pressure Control

系列	B1T			B3-1		B3-A(经济型)
输入讯号	0-10V / 4-20mA/ RS485					0-10V / 4-20mA
输出压力	0-2bar (29 psi)	0-4bar (58 psi)	0-8bar (116psi)	0-4bar (58 psi)	0-8bar (116psi)	0-8bar (116 psi)
建议最大入气压力	3bar (43 psi)	5bar (73 psi)	9bar (131 psi)	5bar (73 psi)	9bar (131 psi)	9bar (131 psi)
最大工作压力	9 bar(131 psi)
监控信号	1-5V / 0-10V / 4-20mA					0-10V / 4-20mA
工作电源	DC24V (≦4W)
响应时间	0.8S
介质	洁净压缩空气或搭配5μm过滤器
重复精度	±0.1% F.S.			±0.25% F.S.		±0.5% F.S.
迟滞	±0.2% F.S.			±0.25% F.S.		±0.5% F.S.
线性度	±0.3% F.S.			±0.3% F.S.		±0.5% F.S.
综合精度	±0.3% F.S.					±0.5% F.S.
流量	4L/min @2bar	7L/min @4bar	13L/min @8bar	525L/min @4bar	1050L/min @8bar	1050L/min@8bar
使用温度范围	0-70⁰C ( 32-158 ⁰F)
牙口	PT 1/8"			G 1/4"
底座材质	铝合金
电气连接	M12电气端子(2m)
防护等级	IP 65
阀体操作次数	10亿次以上
重量	420 g			550 g		430 g

Series	Type		Input Signal		Monitor Output		Mounting Bracket		Pressure and Flow		Display Unit
QKL-	B1T	-	E	-	C	-	M	-	P8	-	U
	B1T: Low flow with internal feedback		**E: 0-10V		C:0-10V		M:M type		For B1T, B2T P2:0 - 2 bar, 8LPM P4:0 - 4 bar, 10LPM P8:0 - 8 bar, 20LPM		S:psi
	B2T: Low flow with external feedback		A: 4-20mA		A:4-20mA		L:L type				U:bar
	B3-1: High flow with internal feedback		R: RS485 Modbus		D:1-5V				For B3-1, B3-2 P4:0 - 4 bar, 320 LPM P8: 0 - 8 bar, 640 LPM
	B3-2: High flow with external feedback								For B3-1, B3-2 P4:0 - 4 bar, 320 LPM P8: 0 - 8 bar, 640 LPM
	*B3-A: High flow with internal feedback								For B3A P8:0 - 8 bar, 640 LPM

*B3-A is an economic type, only with 8 bar. B3-A does not have RS485 modbus interface and does not have 1-5V monitor output.
** For Command Signal type 0-10V, the minimum driving current is 50mA.
★Please consult us for customized pressure range.

The wiring diagram shows from top view.

No.	Color	Function
1	Blue	24V DC Power (-) Command (-) Output monitor (-) 2^nd loop transducer 0 -10 V (-)
2	Brown	24V DC Power (+) 2^nd loop transducer 4 - 20 mA (+)
3	Black	Monitor output (+)
4	White	0-5 V Command (+) 0-10 V Command (+) 4-20 mA Command (+)
5	Gray	RS485(D-)
6	Green	2^nd loop transducer 0 -10 V (+) 2^nd loop transducer 4 - 20 mA (-)
7	-	-
8	Red	RS485(D+)

** Warning: Do not rotate the connection socket when connected, to avoid damage to the internal sensor.
Product Precautions

Installation
The valve can be mounted in any position. For very low pressure control, works best when mounted upright.
And Ensure a minimum closed end volume of 40c.c. to allow proper functioning.

※Preparation Before Piping
Before piping is connected, it should be thoroughly blown out with air (flushing) or washed to remove chips, cutting oil and other debris from inside the pipe.
Wrapping of Sealant Tape
When screwing together pipes and fittings, etc., be certain that chips from the pipe threads and sealing material do not get inside the piping. When sealant tape is used, leave 1.5 to 2 thread ridges exposed at the end of the threads.

Operating Environment

Do not operate in locations having an atmosphere of corrosive gases, chemicals, sea water, or where there will be contact with the same.
In locations where the body is exposed to water, steam, dust, etc., there is a possibility that moisture or dust could enter the body through the EXH port, solenoid valve EXH port and/or built-in regulator EXH port, thereby causing problems.
In locations which receive direct sunlight, provide a protective cover etc.
In locations near heat sources, block off any radiated heat.
Employ suitable protective measures in locations where there is contact with water droplets, oil or welding spatter, etc.

Air Supply

Compressed air, nitrogen, oxygen or argon can be used as a fluid.
Do not use compressed air which includes chemicals, synthetic oils containing organic solvents, salt, or corrosive gases, etc., as this can cause damage or malfunction.
If oxygen is used as the fluid, it can lead to serious and unforeseen risks. However, it is possible to manage and control the risk of hazards and economic loss. In order to use the product safely, it should only be handled by personnel with appropriate knowledge, with support from a suitably qualified specialist.
Oxygen gas increases the susceptibility of substances to burning; Oxygen gas can be ignited by frictional heat and static electricity. If oxygen is ignited, the metal and seal materials burn. Therefore, flush the piping thoroughly and mount a suitable filter to prevent foreign matter such as metal powder and dust from entering the product.
Take safety measures by installing safety devices (e.g. a circuit that stops the supply of oxygen gas) to prevent fire and explosion in the event of failure, taking flameproof safety standards into consideration.
Since there are some exhaust ports on the product, connect the piping in order to exhaust oxygen. Do not block the exhaust port.

Warranty
KaoLu Ent. Co. Ltd. products are warranted to the original purchaser only against defects in material or workmanship for 6 months from the date of manufacture. The extent of KaoLu’s liability under this warranty is limited to repair or replacement of the defective unit at KaoLu’s option. KaoLu shall have no liability under this warranty where improper installation or filtration occurred.