搜寻 - 射出成型

Screws and Barrels for Injection Molding

产品分类 : 螺杆与机筒

高速精密立式射出成型机-YQ系列

产品分类 : 立式注塑机

• Vertical four-pillar vertical clamping, with vertical injection. • The square pillar design comes with large mold size. The space within the column allows customers to install devices of automatic embedding and removing products. This allows automation for the whole machinery. • Big L / D ratio of screw, plasticizing evenly, suitable for injection molding of engineering plastics. • High standard computer control system with high precision injection pressure and high response injection speed. The quality is more stable for high-precision embedded injection molding products. • 1S single sliding: After mold opening, the lower mold will automatically slip in front of the operator for facilitating embedded molding operation. • 2S double sliding (Alternating double sliding): One mold for injection molding, another mold for taking out and putting on embedded parts operation. • 2SL double sliding (90°Alternating double sliding): One operator can operate independently. One mold for injection molding, another mold for material taking and putting on embedded parts. The two slidings are intersecting at 90 degrees, which can lower the production cost, and enhance the performance. • Able to combine automation and the high-speed injection can effectively enhance the production capacity. • A variety of circuit design (half closed servo hydraulic or high speed injection) to meet the customer’s requirements.

高速曲肘式伺服节能射出成型机 (TSV 系列)

产品分类 : 液压夹模注塑机

特快锁模系统，采用油压差动回路，提高速度达60﹪以上，缩短周期，节省能源。 特殊无给油自润模板滑片，耐磨耐压，耐用性久。 自润铜司曲肘机构，确保机器之精度，可防止曲肘磨损。 采用BOSCH快速比例压力速度阀，此阀带有位置反馈，能够迅速反应回馈，达到敏捷精准的控制需求。 适用成型精密度高、薄壳成品之塑胶制品。 (成品厚度1 ㎜ L/t大于200) 蓄压器为选配装置。

一段两工位式射出吹瓶机- IB 系列

产品分类 : 注塑中空成型机

全机机构以泛用型射出成型机为设计蓝本，故无论操作、保养维护及换模工作只需具备一般射出成型之知识已足够应付裕如。设备价位合理，可降低生产者之机械及模具投资成本，提升市场产销之竞争力。

BMC专用射出成型机

产品分类 : 卧式注塑机

Common commissioning for molding products such as electric parts and auto headlamps with insulated characteristics. Steel and FRP plates are installed on the fixed and movable platens to insulate the heat generation from the thermoset mold.

热固性节能注塑机90BBE到400BBE

产品分类 : 卧式注塑机

● EXTRA ELEMENTS FOR THERMOSET PROCESSING ● SPECIAL SCREW BARREL DESIGN FOR THERMOSET MOLDING ● THREE-STAGES HEATING COMPONENT FOR KEEPING THERMOSETS UNDER A PERFECT PLASTISIZING CONDITION

Rubber Injection Molding Machine - Direct Clamping JD-RH series

产品分类 : 橡胶注射成型机

Machine for natural, synthetic, oil resistant,heat resistant and reclaimed rubber.

二板式伺服节能射出成型机

产品分类 : 压板注塑机

The actuator of the clamping force is installed on the fixed platen of the conventional two platens injection molding machine. The design of the MBE model has four sets of traveling cylinders inside of the movable platen to close the mold and to build up the clamping force at the center of the platen.

曲肘式射出成型机

产品分类 : 卧式注塑机

STANDARD EQUIPMENT & ACCESSORY FOR SW-B SERIES ● Hydraulic device and electrical control for core puller and unscrewing ● Automatic mold height adjustment ● Automatic oil lubricator ● Air ejector device ● Micro mold adjustment device ● Anti-vibration damper ● Mold clamps

立式塑胶、立式射出成形系列 YHL 系列

产品分类 : 立式注塑机

- 立式直立锁模，直立射出的机体方式，结构简单，宽台面。 - 采射出中心偏位元的设计方式，使三面空间更加开放，能适用长条状汽车密封条接角成型或带有导线产品成型，让成型作业更加容易。 - 立式塑胶射出机，射出系统采标准、模组化设计，通用各类型的嵌件注塑成型，塑胶成型能力特优。 - 立式橡胶射出机，射出系统采螺杆进料，柱塞射出二阶段的设计，能适应不同硬度的橡胶材料，橡胶注射稳定精确。 - 最优化的设计方案，如锁模/注射/塑化等单元最可靠的射出成型设备之一。

J型机构橡胶射出成型机

产品分类 : 制鞋机

●备料简单容易，不须秤重或考虑产品外型。 ●胶料经螺杆射出及保温控温之预热过程，有效缩短成品硫化时间、提高生产效率。 ●采用流道充填模头方式，针对形状复杂成品亦能轻易成型。 ●搭配模具之设计及定量射出控制，可大幅改善无效毛边、节省工时成本。 ●立式夹模机构，方便含骨架工件放置。

矽胶自动射出成型机

产品分类 : 硅胶注塑机

本系列机种，专用于固态矽胶制品。