English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
新型脱吸标机
产品分类 : 废塑料回收机
The Label Remover Plus integrates heat-shrink label scrapping and label removal functions • which can adapt to dry desorbing and wet desorbing at the same time, effectively improve the production environment, and significantly improve the label removal rate and finished product quality.
双层底封制袋机（4/6/8线）DL-V-（4/6/8）
产品分类 : 塑料制袋机
冷切系统-用于薄膜材料。机器使用上部加热刀和硅辊底座进行密封。出袋前切刀。双层生产-将2套密封刀片和硅辊组垂直彼此垂直放置以密封不同的线，并在同一把刀上进行切割。
包装网拉舍尔机
产品分类 : 工业针织机
Bale Wrap Net Raschel Machine The machine working width 210 inches(5334mm) Machine gauges: E6/6(1 needle per 25.4mm) Knitting elements: single needle bar, knock-over comb bar and 3 ground bars. Pattern drive: Electronic guide bar motion control system. Fabric take-up: 4 roller system driven by geared motor controlled by motion control. Yarn feeding from slitting extension device driven by servo control system machine. Main application: producing bale and pallet warp nets for packaging and transporting.
多模穴热浇道温度控制器-TC500
产品分类 : 热流道系统
整机系统设计免除繁杂配线模组故障快速更换体积小重量轻，可直接安装于射出机上ID自动辨识230V/380V电压输入快速切换内建NFB 开关长新
SPX 4系列
产品分类 : 指示器和传感器
■ 4-20mA loop-powered output ■ +/- 0.25% accuracy available ■ Wide selection of pressure ranges available ■ Turndown 6:1 ■ Configurations available for use in hazardous locations ■ Remotely configurable via HART ■ Precise, repeatable pressure measurements ■ Output supplied directly to DSC or PLC ■ Meets CE requirements ■ CE ATEX Intrinsically Safe Approved ■ SIL 2 Certified (pressure output) ■ PL'c' Certified (relay output) ■ Additional approvals are available
百捷系列模具控温机STM-EB
产品分类 : 控制设备
百捷系列模温机应用与模具的加热与恒温。此外，尚可适用与其他有相同需求的领域。此系列模机以不同的冷却方式(油式为间接冷却，水式为直接冷却) 对媒体(水或油) 进行冷却，再由泵浦加压经过电热管高温加热后送到模具，来达到加热与恒温的要求。其优化的设计使加热温度水式可达120℃，油式可达200℃。
无拉力大型厚袋制袋机
产品分类 : 塑料制袋机
无张力厚规热切系统 - 上封刀和底部热线做出强力高速封口。无张力封口避免高速生产时的封口线拉伸和延长。分离式上下温度控制，便于微调。 超大机型 - 用于生产袋宽超过1M、长度超过2M的袋子。设置可能因薄膜和袋子的种类和条件而异。
Automatic Tube Foiling & Capping Machine FCM 120-02
产品分类 : 旋盖机
1.This machine supports dual functions that can operate simultaneously or independently (Foiling + capping). 2. Equipped with intelligent Al inspection: tubes without orifice or with orifice defects wil not undergo Foiling. 3.Intelligent Al inspection ensures that tubes without foiling or with foiling defects wil not proceed to capping. 4. The capping torque value can be directly set on the HMI (Human-Machine Interface). 5. Products with orifice defects, foiling defects, or incorrect capping torque wil be automatically rejected through the defective product outlet. 6. This machine can also be equipped with a positioning photoelectric sensor to enable snap-on type operation.