English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
4.0G 10 Heads Multihead Weigher (3L)
产品分类 : 计量和测量设备
Multihead Weigher Working Principle The multihead weigher or computer combination weigher usually uses different weigh heads to measure the precise weight of the products. After the product is fed into the top of the multihead combination weigher, the internal distribution system of the weigher starts working. This system distributes the product. With the help of linear feed plates, different linear feeders will deliver some product into the feed hopper. For example, if you are using a 14-head multihead weigher machine, there will normally be 14 linear feeders that will deliver products to 14 feed hoppers. After the products are delivered to the hopper, the load cell begins to calculate the weight of the product in the weigh hopper, and the processor in the multihead weigher then calculates the best combination of available weights needed to achieve the desired target weight.
同向双螺杆进料机
产品分类 : 进料器
PSB 系列--同向双螺杆进料机是PSM同向双螺杆押出机的重要周边设备，由弘煜机械有限公司以多年实务经验设计制造。 PSB同向双螺杆进料机设有大型入料口，可顺畅入料。其螺杆有共轭、非共轭等多种型式，可依照所加工之原料形态及物性的不同，选择适用的螺杆，且螺杆的更换快速方便。配置同向共轭型双螺杆时，会具有强大的正位移动输送能力，及螺杆自清功能，亦具有进料量高、进料稳定等特点，加上其良好的排气效果，特别适用于各种粉未型、潮湿型、低摩擦系数型及粉粒混合型等塑胶原料或辅料的进料。如配置单头、T形螺纹、非共轭型螺杆时，因其具有较深的螺槽和较宽的螺槽容积，可广泛适用于各种粒状、片状、纤维状及粉状物料的增量输送。 PSB进料机通过下料管与本公司出产的PSM同向双螺杆押出机的主进料口联接，亦可依客户需求配合至其他厂牌的押出机使用。此外，依据实际加工制程或客户要求，还可增配预混装置、震荡装置和加热及冷却装置，以符合实际制程之需要。
常压电浆处理PLASMA-JR
产品分类 : 表面处理设备
Applied to 30mm width or tube inside surface treatment. Detail specification contact please. Plasma treaters produce plasma surface treating to promote the adhesion of inks, adhesives, coatings, sealants & paints. Manufacturers integrate in-line plasma treatment equipment to enhance adhesion on plastics, composites, metals & glass surfaces. The plasma pretreatment process cleans, etches, & functionalizes surfaces to activate bonding sites by increasing wettability & surface energy.
Slitting Machines SLIT-IND
产品分类 : 分切机和复卷机
This IND slitting machine is the model that with individual winding stations for film suppliers to slit and cutdown wide width materials such as BOPP, BOPET, CPP, PAPER, etc. The working speed for this model is up to 600m/min and with stable tension control to perform high quality rolls. The maximum loading diameter is 1500mm on the unwind, and 1200mm on the rewinds.
压力放大器(0-103bar)
产品分类 : 指示器和传感器
产品型号: QKL-B1T+QKL-BPF • QKL-B1T压力比例阀 在此QKL-B1T提供流量放大器引导信号的压力。通过控制隔膜顶部的压力，我们可以控制流量放大器输出的压力。 • 压力放大器 亦称圆顶式或先导式压力放大器。它可以是调压阀或背压阀的应用。透过搭配流量放大器的使用，能解决压力比例阀对于气体或流体的限制，也能满足大流量及高解析度的需求。 本体不锈钢材质应用范围非常广泛，适用于气体、液体、多相流体、蒸气、泥浆…等介质。
Co-rotating Twin Screw Strand Pelletizing Compounding Line | CK-HT
产品分类 : 双螺杆挤出机
CK-HT series Co-rotating Twin Screw Strand Pelletizing Compounding Extrusion Line is especially for composite materials that are suitable for strand pelletizing production method. It can be applied to a wide range of plastics. Possible materials: Various composite materials, e.g. PC, PE, PS, ABS, Nylon, LCP, PPS with additives of glass fiber, Wood powder, CaCO3.
Grape Bag Holes Punching and Zipper Strip Hot Lamination Side Sealing Machine
产品分类 : 塑料制袋机
MGA-06Z-800GP
金属侦测分离器SMS
产品分类 : 分离器
SMS系列金属侦测分离器灵敏度高，能快速准确的检测出原料中所含有的各种金属，并自动排出含金属的原料,如不锈钢、铁、铜、铝、铅、锡等。其原理为金属杂质经过金属检测电子设备时，电子侦测器可发出信号，启动阀门，排出含有金属杂质的原料。采用气动排送系统，体积小，排送准确。可直接安装在挤出机料斗上，能更好地保护螺杆不被金属杂质损坏。安装在射出机或压出机料斗上时，料斗需安装高低料位计，防止原料堵塞检测通道，影响机器检测效果。该机型处理量为600L/hr~3,000L/hr，可满足客户不同的需求。仅适用于含有少量金属的原料筛选。
单轴撕碎机-K 系列
产品分类 : 塑料／橡胶撕碎机
k系列单轴撕碎机是适合破碎各种物料的高产量大型设备，尤其合破碎打包成捆的韧性或中硬度物料(薄膜瓶料等)。整机配备摆臂推料设计和PLC自动控制系统，实现较高产量。根据破碎物料类型，该系列撕碎机产量大约在1500公斤/小时至9000公斤/小时之间。
