English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Intermesh Dispersion Kneader Mixer For Rubber And Plastic
The new technology design of this dispersion kneader is equipped with a unique engage-type rotor for mixing/kneading rubber / plastic compounds with different characteristics. The special features are as follows: Fast mixing time. 3-8 mins / batch (depends on different material characteristics, feeding time,cleaning time, and so on) It is specialized for materials requiring low temperature, high oil consumption, and materials with very low hardness, ensuring homogeneous distribution and the highest degree of dispersion mixing. Construction of machine is strong and stable, with no shaking during mixing processes. Accurate temperature control system. Efficient cooling system. Can be applied for different composite materials. Pressure lid is driven by oil hydraulic system which can be adjusted to reduce energy consumption.
DR 型弹簧式举模器
产品分类 : 快速换模与夹模系统
DR型举模器可藉由填隙片的增减，很容易的适用不同尺寸的"T"型槽或"U"型槽。其基本长度有200mm与300mm两种尺寸，经过搭配使用，可产生每100mm的总度变化。
2.7M输送带式水洗机 - JK-270
产品分类 : 水文/水传输机器
均匀分布在水洗区的高性能喷嘴能360度、完全地将转印物件上残余的PVA膜及活化剂清洗干净。 利用输送带式的高产出，再加上100%的水循环，让你的水转印加工更加有效率
H-1 铁壳端子台变压器
产品分类 : 电子、自动化和安全组件
全自动四折底封S型垃圾袋制袋机-SOSR-1300+2T+S+2F
产品分类 : 塑料制袋机
全程电脑控制全程自动生产不停车伺服马达送袋装置易于调整袋子长度以及制袋速度无原料、塞料异常时自动停车配有磁性滚轮刀模冲孔装置
工业固废资源化分选回收系统
产品分类 : 特殊物料回收系统
适用于各类废旧纺织物、高热值工业固废的回收处理，能针对多泥砂、小块金属杂料的物料破碎处理 采用先预碎再破碎的工艺方案，确保物料处理充分且物料体积均匀；系统性能稳定且产能大 整线自动化控制，根据各设备工况变化自动调节适配，使产能最大化的同时对可能出现的异常情况有预判功能，确保系统安全 预碎设备设计为双辊式结构，刀具选用耐磨性能优异的合金材质，且刀具的两侧均可互换使用 细碎系统为特殊设计的斜面阶梯剪切结构，配合高品质的合金钢刀具，提高剪切效率 系统配置滚筒筛，将泥沙，石渣等对设备和产品品质影响较大的物质筛分出，延长刀具寿命，提高产品质量 配置多点除尘系统，在各处理设备中均设置有除尘接口。在系统的多个模块中将粉尘逐步去除，中央脉冲除尘系统将生产过程中产生的粉尘统一收集，排放量小于8mg/m3 系统配有喷淋防火系统，确保安全生产 系统设置有横跨磁选和滚筒磁选两道磁选工艺，将物料中的磁性金属去除，更好的保护设备，从而提高破碎效率，延长设备使用寿命，降低设备的使用成本
Stepper-Controlled Proportional Valve 0-1200L/min
产品分类 : 阀与油路块
Product Serial: FC-1000+PM-1000 Proportional Flow Control Valve consists of PM series driver and FC series proportional flow valve. With an input signal either through analogue or digital, the needle inside the proportional valve moves proportionally to the signal. This series is able to control the flow rate of air and liquid with high resolution, high accuracy, and high repeatability. It is developed for industries that require a high degree of adjustment in flow rate. Series PM driver provides series FC valve with the required power and control signal (step and direction). It controls the step of a bipolar stepper motor with an analogue signal (0-10 VDC/4-20mA/RS485 Modbus).
3-LINE SLITTING & GUSSETING T-SHIRT BAG MAKING MACHINE
产品分类 : 塑料制袋机
This machine is for big width film, can heat slit & sealing the film into 3 lines, then pass gusset units to have 3 lines printed T-shirt bags. The heat slitting device can maintain the stable temperature in operation to ensure the strong sealing. Equipped with servo motor & controller made in Japan to provide high speed production & exactly bag length. Jumbo roll lift-up unit uses automatic machine arm instead of labor to lift up the jumbo rolls. Air shafts are for easier operation & save time. Waste conveyor delivers the waste of film to the indicated position after punch. Finished bag fold device folds the T-shirt bags in half to save the labor working time. We also have 2 lines machine, for more details, please kindly contact us. We didn’t show all specification & model, please kindly contact us for other model & details specification
Dynisco 1480 – 1/8 DIN Panel Indicator
产品分类 : 配料、计量与混合设备
• Universal input (strain gauge, voltage, current, thermocouple or RTD) • Min/max value hold • 2 alarm outputs • Retransmission
空气压缩机（螺旋式）
产品分类 : 压缩空气和气动设备
Extruder heading machine printing machine capping machine sealing machine accessories
自动高速凹版印刷机(ARP)
产品分类 : 凹版印刷机
● 本机用于OPP、PE、PP、PVC、玻璃膜、包装纸、铝箔纸等材料之印刷。 ● 采用车壁整体铸造，EPC自动齐边装置及自动张力控制，提升效能。
计量式色母混合机SCM
产品分类 : 配料、计量与混合设备
SCM系列计量式色母混合机适用于新料、次料、色母或添加剂等的自动比例混合。该产品的马达减速比为38:1，螺杆直径区分为12、16、20、30mm四种，可演变出四种机型提供0.1~110kg/hr的不同输出量供客户选择。另有双色色母机，可依客户需求搭配任意两台色母机合并使用。若客户使用四色色母机可实现五组份自动比例混合。当用于PET高温场合时，可采用高温型色母机SCM-H，该机型需注入常温冷却水。 SCM支持挤出机模式，当用于搭配挤出机使用时，只需简单的线路调整，即可实现色母计量与挤出机螺杆转速的联动，保证色母的添加比例始终稳定。由于色母料的添加比例比较小，其消耗量也较小，则可搭配正压空气填料机VL实现色母料的自动补充。
Fully Automatic Conversion Line CSP-2002/1-4 colors
产品分类 : 编织袋制袋机
Zigzag Type High Quality Alloy Steel Cutter Double-Fold sewing Guide Device Cold Cutting System (for laminated bag) Mark reading sensor (for pre-printed fabric roll) In-Line Gusset Device Perforation Needle Roller
独立凸版/胶版印刷机FSP-5000
产品分类 : 柔版印刷机
这是比较起LL机型更加进阶的凸版/胶版印刷机，标准配置日本原装进口的放料自动张力控制器，和油压式对边控制器，双收双放卷料座使得操作上更加有效率。膜料进度印刷座前有香蕉轮做膜料的延伸的更加平整，每个印刷座都有独立的干燥管做印刷膜料的初步干燥，机器附有T5灯管保持工作场所的明亮，上部有过头干燥箱加大加热功能配合鼓风机确保膜料可以配合高速印刷做干燥。机器中间没有设置工作台，操作人员可以直接用推车将膜料推至放料座前做放料。
HDPE HIGH SPEED PLASTIC INFLATION MACHINE : KMH-35
产品分类 : 吹膜挤出机
The KMH-35 is a high-speed HDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where HDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KMH-35 produces HDPE film in 0.008-0.10 mm thickness and up to 400 mm width, with output between 10-28 kgs/hr.The extruder uses a Ø 35 mm screw at a 26:1 L/D ratio, driven by an AC 15 HP motor with inverter and backed by 3-zone auto thermo control on the barrel. The die unit runs a Ø50/80 mm die with a Ø120 mm air ring, and the take-up section operates at speeds up to 85 m/min.Model: KMH-35Suitable material: HDPEFilm thickness: 0.008-0.10 mmFilm width range: 400 mmFilm output: 10-28 kgs/hrScrew diameter: Ø 35 mm, L/D ratio 26:1Driving motor: AC 15 HP + InverterMachine dimension: 350×260×310 cm
6 COLORS FLEXO PRINTING MACHINE (HIGH SPEED TYPE)
产品分类 : 柔版印刷机
These flexographic printers are able to print in six colors with the following possibility: 0+6, 1+5, 2+4, 3 +3 Max. printing speed 70-80 mts/min Standard printing length is max. 800 mm, bigger printing length can be requested as your demand Equipped with Edge Position Controller (EPC) We didn’t show all our models, please don’t hesitate to contact us for bigger printing machines.
FIBC Bag NO.1
产品分类 : 包
Size: 90×90×100 cm Style: Open top (no lid), flat bottom Color: Black Load Capacity: 1,000 kg Note: 1-up 400
触控萤幕(人机)操作盘面
产品分类 : 控制设备
Rubber Pellet Making Line: This KD pellet line is designed to provide automatically rubber pellet making line. It includes : Auto Weighting-->Mixing-->Extruding-->Pelletizing -->Cooling-->Screening& Storage. Features: This KD pellet line is designed to provide automatically rubber pellet making line. It includes : Auto Weighting-->Mixing-->Extruding-->Pelletizing -->Cooling-->Screening& Storage. Options: This KD pellet line is designed to provide automatically rubber pellet making line. It includes : Auto Weighting-->Mixing-->Extruding-->Pelletizing -->Cooling-->Screening& Storage.
全自动侧封尿布袋制袋机加大风车
产品分类 : 塑料制袋机
- Fully automatic side sealing type diaper bag making machine with wicketer. - 2 sets of servo motors for feeding system. - 2 sets of servo motors for punch position and indexing station alignment. - 1 set of servo motor for indexing station position control. - 6 or 8 vacuum arms depends on size of bag. - Human-machine interface for easy setting. - Pneumatic type auto-lifter and EPC at unwind stand. - Continuous hot-air sealing system handle film. - Precision mold for handle punch.
民生工业- TA/TC/TS/TZ/TF Series
产品分类 : TPR（热塑性橡胶）
EVERLON®是SEBS基TPE，中间是苯乙烯乙烯橡胶，而末端是聚苯乙烯。通过氢化反应，可获得优异的耐候性和耐热性的稳定性。基于SEBS的热塑性弹性体（TPE）。应用范围：计算机和笔记本电脑，手机壳和数码相机，工业零件。 Ever Polymer的使命是满足市场上热塑性弹性体（TPE）原材料的所有应用需求。 TPE TPR tpe材料tpe材料环保tpe材料制造商tpe材料性能tpe材料有毒tpe塑料回收tpe原材料tpe橡胶什么是tpe材料tpe材料安全
常压电浆处理PLASMA-JR
产品分类 : 焊接与表面处理设备
Applied to 30mm width or tube inside surface treatment. Detail specification contact please. Plasma treaters produce plasma surface treating to promote the adhesion of inks, adhesives, coatings, sealants & paints. Manufacturers integrate in-line plasma treatment equipment to enhance adhesion on plastics, composites, metals & glass surfaces. The plasma pretreatment process cleans, etches, & functionalizes surfaces to activate bonding sites by increasing wettability & surface energy.
TC5V 阀门控制器-2段
产品分类 : 控制设备
输入讯号选择( AC220 / 110 / DC24 / 开关式) 输出模式选择( AC220 / 110 / DC24 / 开关式) 时间显示可调至小数点第一位时间计数可选择累加或倒数三种控制模式选择可选择保压模式电子式开关延长使用寿命( 电流可达600 mA ) ( 标准) 可选用机械式开关，输出电流较大( 选配) 长新
铝箔专用型印刷机- 独立马达系统(WAP系列)
产品分类 : 凹版印刷机
为了符合业者多元印刷产品，印刷结构规划六色印刷座，末端再搭配一座涂布座，可于铝箔印刷后直接上光，提高铝箔的印刷效果，此涂布机亦可做背胶使用，足以应付各种不同印刷需求。每一色印刷座之间，都搭配适用于铝箔材质的特殊翻转结构，再结合于正反两侧设置刮刀座，使业者能够任意在任何一色进行反面印刷，轻松达成各种的印刷要求。此外，每座印刷座采用「日本住友重机」独立马达系统，可于印刷作业的同时，更换下一个工作单的印刷版筒，不但节省作业时间，更提升套色的反应时间及效应。此机型还另外附加一座干燥系统位于机台上层，具有四区隧道式的干燥风箱，其干燥效率更加迅速。放料及收料座采双轴式自动接料，不需停机即可完成续料作业，操控简易。全机以高性能的PLC数位控制器搭配触控式人机介面做连动控制，精准且确实达到高效率的操控效能，并具有自动套色功能，让印刷密度及品质更臻至完美。在品管方面，玮礼设置VIDEO检视系统，即使在高速印刷作业下也能即时做到品管监控，有效协助印刷作业与品质提升。
三机一体子母机模头切回收造粒机
产品分类 : 塑料制粒和配料生产线
三机一体结合了粉碎、压出和造粒摆设空间较小，节省空间和操作人力 粉碎拌匀，加热，干燥 生产效率高、噪音低 操作简单，减少劳动力成本 子母机加上透气孔，共三次透气 两段式过滤使原料更干净。
