injection molding - 53 suppliers found

推荐厂商

Corona Treater

产品

产品 (225) 厂商 (53) 媒体 (56) 部落格 (123)

观看更多 : 12 24 36 48

CE认证橡胶射出成型机IRH(CE type)

产品分类 : 雨靴注塑机

Material supply system A special design of two-stage material supply is adopted. It expels bubbles out of the raw material in the most effective way and there is no dead material.

霖城科技股份有限公司

投料式转射成型机

产品分类 : 橡胶注射成型机

产品特性射出量控制采高精密度光学尺设计，能准确的控制与计算射出量之大小。转射板设计具特殊的座进、座退功能，可使射嘴不死料。清料容易，品质稳定。

霖城科技股份有限公司

2RT开模轮胎胶囊专用橡胶后射式成型机

产品分类 : 橡胶注射成型机

2RT超越了传统的顶部开模，可用于双模或三模，并具有开模的设计并在两者之间推出模具。可以通过软件调整开模，并分别打开，分开推开模具，连续打开和连续推开模具。

霖城科技股份有限公司

2RT开模轮胎胶囊专用橡胶射出成型机

产品分类 : 橡胶注射成型机

产品特性开模设计当模具出模时，前顶油压缸会顶出模芯并且吹气，使胶囊充气脱模，方便操作者拿取成品。射出量控制采高精密度光学尺设计，能准确的控制与计

霖城科技股份有限公司

立式橡胶射出成型机 (先进先出)

产品分类 : 制鞋机

泛用型冷浇道：聪明省下更多余料，有效降低生产成本。卧式机构设计符合人体工学，结合自动化流程，操作上更加顺畅。利用自动脱模机构，成品即能藉由自重落下，提升自动化生产程度。可选OPC UA设置规格，无缝整合其他成型设备与周边系统。

东毓(宁波)油压工业有限公司

Mold opening design The 2RT surpasses the traditional top opening mold that can be used for the double or triple molds with the design of the opening mold and pushing out the mold in the between. The opening mold can be adjusted by the software with separate opening, separate pushing out the mold in between, continuous opening and continuous pushing out the mold in between. tyre bladder

霖城科技股份有限公司

DOUBLE INJECTION MOLDING

产品分类 : 注塑模具

Double Injection, sometimes known as 2 material 2 shot molding or 2K molding, is an innovative manufacturing process used to produce complicated molded parts from two different materials. Through a highly specialized and automated process we carefully control the injection of multiple materials, including two different kinds of resin, into a single, multi-chambered mold. Double Injection in performed on one machine that is programmed to perform two injections in one cycle. In the first cycle, a nozzle injects plastic into a mold. The mold is then automatically rotated and a different type of plastic is injected into the mold from a second nozzle. Double Injection Molding optimizes co-polymerization of hard and soft materials to create powerful molecular bond. The result is a single part with production and feature advantages. It can be used for a variety of product designs across all industries. It also allows for molding using clear plastics, colored graphics and stylish finishes which improves your product functionality and marketplace value.

双色塑胶射出成型机

产品分类 :

DNT 系列是为配合成品需要两色或两种不同材质射出的要求。主要功能达到一次完成双色或帮助双材质缩短二次加工时间。

舜展机械股份有限公司

二板式伺服节能射出成型机

产品分类 : 压板注塑机

The actuator of the clamping force is installed on the fixed platen of the conventional two platens injection molding machine. The design of the MBE model has four sets of traveling cylinders inside of the movable platen to close the mold and to build up the clamping force at the center of the platen.