English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Moldpro Temperature Controller – Key Features
产品分类 : 流道系统
(1) Synchronized Heating: On startup, the software identifies the hot plates and activates synchronized heating, where faster-heating zones follow the slower ones, so all zones reach operating temperature at the same time. (Invention patent granted) (2) Over-Temperature Protection: If temperature rises 30°C above the set point and is out of control, the system sounds an alarm and cuts power to prevent fire and resin carbonization inside the runner. (3) Under-Temperature Alarm: If temperature falls 30°C below the set point and is out of control, the system sounds an alarm. (4) Auto Zone Detection: Automatically detects the number of zones on startup and powers them on, with no need to activate each zone manually. (5) Compact Design: 4-, 6-, and 8-zone controllers are only about the size of an A4 sheet, saving valuable floor space. (6) SCR Power Output: SCR phase-angle power output effectively protects the hot runner heating system. (7) Heater circuit fault detection. (8) Thermocouple open-circuit detection. (9) Thermocouple reverse-connection detection. (10) Instant Alarm: The system immediately sounds an audible alarm upon detecting any abnormality. (11) Optional valve gate control. (Patent pending) (12) Optional auto power-off when the injection molding machine is idle for an extended period. (Patent pending) (13) 2-year warranty (excluding fuses and damage caused by human error). (14) Product Liability Insurance: Covered by NT$20 million product liability insurance (Taiwan only). Warning: High voltage. Do not open the controller housing. (Covers bodily injury attributable to Moldpro products; actual compensation may differ from the insured amount.)
Inverter Duty Motor: TFEF Series
产品分类 : 传动、电机与驱动系统
Higher precision motion control and speed adjustment to make the machine in automation, high production capacity purpose.
Foam Sheet Extrusion Line
产品分类 : 流延膜、片材与板材挤出生产线
Foam Sheet Extrusion Line Features : With proper mixing of melted resin & blowing agent, provides most homogeneous mixing. Accurate blowing agent injecting quantity and temperature control to stabilize the foaming process. High level safety control, system will be shut down automatically when extruder motor failure or high pressure.
PVC,PE,ABS管材制造机
产品分类 : 管材与型材挤出生產线
3RT开模橡胶射出成型机IRH-S3
产品分类 : 橡胶注射成型机
●开模设计3RT 架构特点在于超越一般传统前顶式掀模，可用于三层或四层模具之特殊功能，具有掀模及中层模具个别顶出之设计。此掀模功能具有分段掀模、分段中模顶出、连续掀模及中模顶出之软体设计，可依操作需求作调整。 ●入料系统特殊二段式入料设计，能使原料得到最佳排气效果，又不死料之功能。 ●射出量控制采高精密度德制光学尺设计，能准确的控制与计算射出量之大小。
Viscosity Controller (CE)
产品分类 : 印刷周边辅助设备
The UT-SCS-550 viscosity controller is designed to control a stable ink concentration, theconcentration of solvents during printing and is built for best ink / solvent concentration during operation. Reliable operation can result in substantial reduction of material cost. The unit can be employed as an auto blending device in ink blending. When controlling the ink solvent concentration, the unit provides different sound alarm modes (continuous or intermittent) for various statuses. Designed as an explosion proof system, the electric controls and flow line of solvent are sseparated completely and uses pneumatic valves. The system allows direct measurement of the fluid materials.Additionally it can be equippd with an oil mist re-collection device which will avoid product pollution by greasy dirt...
DG-P系列 专用PET射出成型机
产品分类 : 电动注塑机
DG-B 系列专用BMC射出成型机近年来由于PET材料被大量应用于容器生产，且有逐渐取代以PP,PE,PVC容器等材料趋势，但由于此材料特性关係，因此在射出成型机方面之螺杆设计有异于一般螺杆之设计，其次，由于生产模具之冷热交替，在与空气接触后，模具表面极易凝结水气，这对PET在结晶过程将影响至大，因此，维持一稳定温度于锁模侧便益加重要；DG-P系列射出成型机即是针对PET材料生产而专属。
Bottle Filling Machine
产品分类 : 贴标机
FEATURES : 1. Made of SUS#304 corrosion resistant stainless steel and aluminum alloy 2. Filling volume and speed can be adjusted easily PLC control system with HMI touch panel for easy management 3. Memory storage of 15 to 20 sets for future usage 4. Ball-valve shut-off nozzle prevents liquid from dripping down 5. Dipping nozzles can prevent spillage and diminish bubbles 6. Capacity depends on filling nozzles, product and volume. 7. Machine is customized 4 - 12 filling nozzles. 8. It can be optional combined with the capping machine, labeling machine, shrink machine… 9. Piston pump filler is standard equipment, servo filler is optional. APPLICATIONS : Shampoo, Engine oil, Motor oil, Hair condition, Lubricant, Water, Sauce and other liquid or paste products …..etc..
