English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
全电式射出成型机齿轮箱
产品分类 : 传动、电机与驱动系统
三隆精心研制之射出成型机齿轮箱有效驱动射出机射胶螺杆。搭配平行入、出力轴之齿轮箱，依据客户个别需求，设计适合传动高扭矩力之齿轮箱，使齿轮箱具备极优异之低噪音、低振动特性。
DG-EP 系列 伺服马达驱动射出成型机
产品分类 : 自动注塑机
•于低速范围有极优秀之安定控制 •长时间高压的射出保压性能 •30ms高应答射出 •几乎与电动式射出机一样的电力消耗 •射出速度及压力闭回路控制，高度之成型安定性 •关模机构使用免润滑轴套＋黄油润滑系统
V系列 立式射出成型机
产品分类 : 自动注塑机
佔地空间小,精巧灵活,降低成本并提升产品品质。 配置滑板型功能,容易操作,适合各种嵌入式产品之生产。 配置光幕式(LIGHT CURTAIN)完全系统,提升人员的安全性。
磁力快速换模系统
产品分类 : 换模系统
Electro-permanent magnetic quick mold change system is perfectly for 50~4000 Tons injection molding machines.The latest magnetic structure and outstanding design of magnetic circuit achieves a 20% and more of the magnetic force than traditional magnetic temperate design Electro-permanent magnetic quick mold change system provides much greater improvement on mold change efficiency. It performs less than 3 minutes for mold changing of general injection molding machine. For large size machine, it will shorten the mold changing time from 2 hours down to 10 minutes. The system requires just single operator for mold changing job. Without any tool, operator can easily handle this system beyond the safety distance of the machine. The system can reduce labor cost and man power waste greatly. 8 special safety function designs can fully protect machine operation safety.
软件产品及服务系统-iNET
产品分类 : 控制设备
iNet是一套完整的射出机工厂网络化管理解决方案，协助塑料厂生产与车间管理，藉由网络链接，作为管理层与生产现场沟通的桥梁；亦使管理者(administrator)进行全球营运，提供客户管理新趋势、掌控世界潮流，是成功迈向企业信息化的必备武器。
奥地利KEBA控制器I系列控制单元
产品分类 : 控制设备
EUROPEAN QUALITY ELEMENTS ENSURE PERFECT PERFORMANCE FOR IMM ● High-performance 32 bit processor ● All I/Os for standard injection molding machines ● PWM current outputs for direct control of proportional valves ● Optimized digital outputs for hydraulic switching valves ● Thermocouple inputs for different types of sensors ● Pulse input for screw speed ● Ethernet connection for host computer ● USB connection for printer, modem, USB stick, etc.
直压式伺服节能射出成型机 (HCV 系列)
产品分类 : 卧式注塑机
• 新一代的直压锁模机构设计，一体成型高压缸，搭配插装式满油阀机构，钢体强度佳，机械寿命长，起压反应快速，开锁模动作快速稳定，确保精密成型。 • 全机电阻尺位置控制，操作简易且精度高。 • 采用高效率日本伺服马达(DAIKIN SUT SYSTEM)具压力、流量、回馈装置，达全闭环回路伺服控制，应答性0.07秒以内，再现性1%以下，直线性1%以下。 • 对角式双射移设计，受力平均，射台鞍座采用高精密度线性滑轨减低机械损耗，确保精准射胶动作。 • 储料背压采比例式控制。 • 螺杆、料管经电离子氮化处理寿命特长。
Moldpro Temperature Controller – Key Features
产品分类 : 流道系统
(1) Synchronized Heating: On startup, the software identifies the hot plates and activates synchronized heating, where faster-heating zones follow the slower ones, so all zones reach operating temperature at the same time. (Invention patent granted) (2) Over-Temperature Protection: If temperature rises 30°C above the set point and is out of control, the system sounds an alarm and cuts power to prevent fire and resin carbonization inside the runner. (3) Under-Temperature Alarm: If temperature falls 30°C below the set point and is out of control, the system sounds an alarm. (4) Auto Zone Detection: Automatically detects the number of zones on startup and powers them on, with no need to activate each zone manually. (5) Compact Design: 4-, 6-, and 8-zone controllers are only about the size of an A4 sheet, saving valuable floor space. (6) SCR Power Output: SCR phase-angle power output effectively protects the hot runner heating system. (7) Heater circuit fault detection. (8) Thermocouple open-circuit detection. (9) Thermocouple reverse-connection detection. (10) Instant Alarm: The system immediately sounds an audible alarm upon detecting any abnormality. (11) Optional valve gate control. (Patent pending) (12) Optional auto power-off when the injection molding machine is idle for an extended period. (Patent pending) (13) 2-year warranty (excluding fuses and damage caused by human error). (14) Product Liability Insurance: Covered by NT$20 million product liability insurance (Taiwan only). Warning: High voltage. Do not open the controller housing. (Covers bodily injury attributable to Moldpro products; actual compensation may differ from the insured amount.)
