PRM-TAIWAN-塑胶机械与橡胶机械入口网

搜寻 - R

We have found 3388 product types of R and 475 related suppliers. Get the most detailed machinery information and contact the manufacturers directly.
推荐厂商
Belt Conveyors
Belt Conveyors

产品分类 : 物料输送与储存设备

Protection of Your Machine The belt conveyor allows to installing a metal detector on it. With the metal detector, it prevent any metal been feed into the pelletizing system. Protecting the pelletizing systems from damage which caused by metal. GENIUS

Solventless Laminating Machines-Coat Weight Measuring System
Solventless Laminating Machines-Coat Weight Measuring System

产品分类 : 工业复合/覆膜机

Introduction Webcontrol Coat Weight Measuring System is an advanced real-time monitoring and automaitc closed-loop control solution designed to optimize coating accuracy, production stability, and manufacturing efficiency. By continuously measuring coat weight during production, the system enables precise process control, minimizes production variatin, amd ensures consistent product quality throughout the entire laminating process. From Manual Adjustment to Intelligent Automation Traditonal laminating processes rely heavily on manual setup, operaor experience, and repeated sampling to maintain coating quality. During startup, operators mut run blank materials, stop the machine mulitple times for sample collection, and manually measure coat weight before making further adjustments. This time-consuming trial-and-error process increases setup time, material waste, and the risk of inconsistent coating quality. Furthermore, without-real-time monitoring during production, coat weight deviations between rolls may occur, resulting in unstable product quality and increased production risks. With the Webcontrol Coat Weight Measuring System, the laminating procss becomes fully automated, continuously monitored, and intelligently controlled in real time. After selecting the appropriate recipe and completing sensor calibration, the system continuously measures coat weight and automatically adjusts coating conditions through advanced closed-loop conrtol technology. This intelligent automation significantly reduces manual intervention, setup time, and material waste while maintaining stable and consistent coating quality throughout the production process. In addition, real-time monitoring and automatic data reporting provide complete process visibility, helping manufacturer improve productivity, prpcess consistency, and overall product reliability. Comapared with traditional laminating operations, the Webcontrol Coat Weight Measuring System delivers a smarter, faster, and more stable production solution. By replacing manual sampling and repeated machine adjustments with real-time monitoring and automatic process control, manufacturers can improve prduction efficiency, reduce waste, minimize human error, and achieve consistent coating quality from roll to roll. Smart Factory & Industry 4.0 Webcontrol Coat Weight Measuring System featuring real-time data monitoring, automated process control, and comprehesive production data management to help manufacturers build a smarter, more digitalized, and highly efficient production environment. The system enhance process transparency, strengthens quality tracebility, and provides a solid foundation for future smart factory integration and digital transformation. Features Increase Production Efficiency : Reduce setup time and minimize machine downtime through intelligent automatic adjustment. Reduce Material Waste : Optimize adhesive usage and reduce startup waste with continuous coat weight control. Improve Product Consistency : Maintain stable and accurate coat weight throughout the entire production process. Real-Time Process Visibility : Monitor production continuously with instant feedback and live process data. Automatic Report Generation : Automatically generate detailed production reports after each roll, including coat weight, position, tolerance, and production data for complete process tracebility. Flexible Report Acess : Reports can be easily accessed via FTP, memory card, or real-time connection for efficient data management and production monitoring. Webcontrol Machinery Corp. builds the RC System for coat weight measurement and lamination precision. We have installed over 3,000 machines in more than 80 countries, and the RC System meets CE (EU) and UL (US) safety standards. The system monitors coat weight in real time and applies automatic closed-loop control to keep it within tolerance. It also generates a report for every roll, covering coat weight, position, tolerance, and production data, and you can retrieve that report by FTP, memory card, or a real-time connection. The result is less setup time and less material waste. Q: How does the RC System control coat weight during a production run? A: Webcontrol Machinery Corp. built the RC System to monitor coat weight in real time and adjust it automatically through closed-loop control. You do not need to stop the line to check coat weight by hand, which keeps setup time and material waste down while holding the coat weight within tolerance. Q: How can we trace the production data the RC System records? A: Webcontrol Machinery Corp. equips the RC System to generate an automatic report for each roll, covering coat weight, position, tolerance, and production data. You can pull that report by FTP, memory card, or a real-time connection.

筛选机
筛选机

产品分类 : 分离与过滤设备

PSN系列--震动式筛选机是弘煜机械有限公司精心设计专为塑胶或橡胶制粒的筛选功能而开发制造的,亦为橡塑胶之拉条制粒、水中制粒及水环制粒、风冷式切粒过程中必须使用的周边设备。 PSN震动式筛选机使用强力高速振动马达,配合专业设计的开放式结构与筛选网孔,能有效快速的筛选出尺寸过大或过小之塑胶颗粒,使标准尺寸之塑胶颗粒迅速进入输送系统。此外,PSN震动式筛选机另配有风冷除湿功能,可对筛选中之颗粒再次除去蒸发热气与湿气,达到塑胶颗粒充分干燥与冷却的要求。

回收制粒机
回收制粒机

产品分类 : 塑料制粒生产线

Material applicable: Rigid or foam of PP/PS/PE/HDPE/PET.. etc.

Side Sealing Bag Making Machine(GF-S/SV Series)
Side Sealing Bag Making Machine(GF-S/SV Series)

产品分类 : 切割机

The GF-S/SV series is JANDI'S range of servo-driven side sealing bag making machines, covering four cutting widths so that a converter can match the machine to its bag sizes. The GF-24SE/SV pairs with the GF-S600/SV at 600 mm cutting width, followed by the GF-32SE/SV and GF-S800/SV at 800 mm, the GF-40SE/SV and GF-S1000/SV at 1000 mm, and the GF-50SE/SV and GF-S1200/SV at 1200 mm. Cutting length is 800 mm across the series, on film from 0.01 - 0.1 mm.SE models run at Max. 200 Cycles/Min and S models at Max. 150 Cycles/Min. Every machine in the series carries a rear feeder with gusset, fold, slitter and adhesive tape applicator, HMI control, a YASKAWA/JAPAN servo drive, a SICK/GERMANY printing scanner, a conveying belt and a collecting table. Optional equipment includes tension control, EPC, a triangle folding device, punch hole and Mexican hat punch devices, ultrasonic sealing, a perforating sealing knife, an envelope punching mold and an automatic stacking table.Type: side sealing bag making machine series, servo driveCutting widths: 600 mm (GF-24SE/SV, GF-S600/SV), 800 mm (GF-32SE/SV, GF-S800/SV), 1000 mm (GF-40SE/SV, GF-S1000/SV), 1200 mm (GF-50SE/SV, GF-S1200/SV)Cutting length: 800 mm; film thickness 0.01 - 0.1 mmProduction: SE model Max. 200 Cycles/Min; S model Max. 150 Cycles/MinStandard: rear feeder with gusset / fold / slitter / adhesive tape applicator, HMI, servo YASKAWA/JAPAN, printing scanner SICK/GERMANY, conveying belt, collecting tableOptions: tension control, EPC, triangle folding, punch hole, Mexican hat punch, ultrasonic sealing, perforating knife, envelope punching mold, automatic stacking table

WPC PROFILE EXTRUSION LINE - PE/PP/PS/TPE/PVC
WPC PROFILE EXTRUSION LINE - PE/PP/PS/TPE/PVC

产品分类 : 管材与型材挤出生產线

The WPC profile extrusion line is a set of machines used in the production of WPC boards. Differences between WPC profile extrusion and general profile extrusion WPC profile extrusion machine is different from general profile extrusion machine, It has to maximize mixing while minimizing damage to the biomass furnish because the WPC material involves two different types of materials: wood and plastic. It is more accurate processing temperature, melt flow index, etc. are required. The same is that general profile extrusion is a process by which various plastic materials are used to develop quality plastic products that have a feature of continuous (ex: plastic board) but do not include sheet or film products. How does WPC profile extrusion line work? The process of WPC profile extrusion begins with the mixing of wood powder and plastic in the mixer. The ratio of wood powder to plastic varies depending on the desired strength and durability of the final product. Once the mixture is blended, it is fed into the conical twin-screw extruder. The extruder has two screws that rotate in opposite directions, pushing the mixture through a barrel and melting it. The molten mixture is then pushed through a die that determines the shape and size of the extruded profile. The extruded profile is then passed through the vacuum calibration table, which cools it and sets its shape. The haul-off machine pulls the profile through the calibration table, maintaining its shape and ensuring its dimensions are correct. The cutting machine cuts the profile to the desired length, and the stacker stacks the finished product. Advantages of WPC profile extrusion line  Efficient and consistent production of high-quality WPC profile products.  The extrusion process ensures that the final product has a uniform shape and size, with consistent mechanical properties.  Highly automated, reducing the risk of human error and increasing efficiency. Cheng-Yu Plastic Machine is a professional WPC profile extrusion line manufacturer As demand for sustainable, eco-friendly products continues to grow, the wood-plastic composite (WPC) market is booming. We develop WPC profile extrusion lines for profile manufacturers who need a reliable, efficient, and high-quality production process. It is a versatile and flexible solution for profile manufacturers in various industries.

LM-L 非接触式 – 采用 TWIIST 技术 – 多变量 – IO-Link
LM-L 非接触式 – 采用 TWIIST 技术 – 多变量 – IO-Link

产品分类 : 传感、监控与检测设备

LM-L 系列在坚固性、热稳定性和 EMC 抗扰度方面的高性能使它适用于工业环境和移动液压应用。 结合 IO-Link 协议,可以测量与位置相关的其他变量(速度、三轴倾角、加速度和振动、电子设备温度),从而在预防性产品和过程维护方面受益于工业 4.0 的优势。 行程从 100 到 900mm 测量:位置、速度、三轴倾斜、加速度和振动、电子温度 IO-Link 输出 自对准安装机构 工作温度:-40...+85°C IP67防护等级 符合 RoHS 指令 2011/65/EU 输出连接器 M12 - 5 极公头

脱料台盘组合
脱料台盘组合

产品分类 : 液压冲孔机

特殊设计结构,打板经精密加工及硬化处理,多层油封设计。动作滑顺均匀,脱料出力平均。

感温线
感温线

产品分类 : 加热与热控系统

ARICO - 【其它类别产品】最佳解决方案: 长新科技(ARICO)与台湾橡胶/塑胶射出工业领域共存共荣,奠基自1987年以来的长年纯熟制造技术,专注于工业控制仪器技术之研发与创新,特别擅长于精密「其它类别产品」相关产品之客制化制造生产。提供国内外厂商在「其它类别产品」产品上最方便的设定机制、稳定品质、合理价格,本公司除了累积长年客户肯定推荐之「其它类别产品」相关产品外,持续以扎实研发技术原理为经营基础,提供您在塑胶射出工业之温度控制、位移感测、压力传感、射出机物联网等精密工业控制上之最佳解决方案。

防静电CQ类型
防静电CQ类型

产品分类 : 焊接与表面处理设备

Treat width up to 7M Treat distance 10~40 MM Output 7-11 KV

SPX-T(3系列)
SPX-T(3系列)

产品分类 : 传感、监控与检测设备

SPX-T提供了该系列中最好的规格性能。这些放大的发射机消除了对外部信号调理的需要。所有型号都可以直接与分布式控制系统,PLC,计算机和类似的高级控制设备连接。