English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
齒輪計量泵系列-塑胶用
产品分类 : 泵与液压动力单元
容积率 90 ％ 以上的保证 回流率低，快速稳定的流量供应 出入口压差可达 150 bar 齿轮可达到高转速效能，降低本体发热 节省操作成本 可降低押出机驱动的能量消耗 可延长螺杆使用寿命 废边料减少，节省原料消耗，提高产能 产品品质稳定 加热方式: 电加热、油加热 ( 56 CC 以上 )
五加仑PET 瓶胚射出机
产品分类 : 卧式注塑机
KING’S SOLUTION CORP. acquired 18 years of 5-gallon PET preform production practice experience from KING'S MACHINERY ENGINEERING CORP. We provide the full process of Dehumidification Drying raw materials, quantitative additive color mixing machine, rapid and stable injection molding output of bottle preform, mold with 8+8 hot runners, rapid cooling robot mechanism, and the blowing bottle machine itself; Total production cost down with high productivity, and lowest blow bottle defect rate of only 0.5%.
ATOR 系列卧式转盘双色双材质射出机
产品分类 : 多色射出机
Two Roll Mixing Mill (Open Mill)
产品分类 : 橡胶搅拌机
The Two Roll Mixing Mill For Rubber、Plastic、PVC、EVA To Heating、Mixing And Chemicals Or Sulfur Material Uniformity It Can Be As Instead Of The Calender To Produce Un-Exact Rough Sheet Process.
VALVE GATE-SVDT
产品分类 : 流道系统
For the valve pin bushing is integrated with the nozzle, the structure of manifold become very simple, and therefore this series is most suitable for the multi-cavity application. There is a pin in the nozzle and drive by pneumatic or hydraulic to open or close the nozzle. When the valve pin open / close can control the melt filling. Especially for the big gate design, the valve pin will seal the gate after packing process to prevent the stringing and get the unapparent gat mark.
WASTE TYRE RECYCLING
产品分类 : 按应用分类的回收生产线
Reasonable budget and friendly operation Waste Tyre Recycling System with best quality from Taiwan Because of the many grades of the end product and the wide variety in the choice of machinery we are in a position to offer our services in the design, selection, supply, erection and commissioning of complete plants or single machines based on the specific regional and economic conditions. In order to reduce the wear and increase the life time of knives, ChangWoen has designed a three-stage processing technology (pre shredding, granulating, fine grinding) with much economical solution which ultimately produces vary high-quality materials for recycling. Against of shredding entire tyre with steel get rid of steel bead in the beginning of process and that leads to a economical way to I increase the life of knives by 30% more rather than without De-Beading Machine.
一步法射出吹气成型机FS-BT
产品分类 : 注塑中空成型机
FS-BT-S采用2站式伺服旋转台及侧吹系统之设计:在射出瓶胚后,伺服旋转台转向180度,由伺服螺杆将瓶胚口模移至恻吹区吹塑成型。使用侧吹系统之设计,节省并增加生产空间,让瓶胚剪尾装置及成品输送可以架在机台内部,达到完全自动生产。此机种适用于短时间内生产小瓶子。 FS-BT-J也适用于生产宽口瓶此机种和FS-BT-S有等同的生产优点,但是适用于生产宽口瓶此机种之结构较大、较高之射出量及较强之锁模力。采用2站式之机台设计是镀塞之创新设计,FS-BT-S/FS-BT-J仅需较少的瓶口模穴、较低模具成本和更有弹性之模板空间,节省成本。当生产多样的产品时,模具成本是重要的投资成本。银塞射吹设计是简化和创新之生产设计,相对降低成本。
客制化产品
产品分类 : 传动、电机与驱动系统
立式关模立式射出机-YR多重崁入射出机圆盘系列
产品分类 : 立式注塑机
• Vertical clamping with vertical injection. • Rotary table oscillate 180 °, rotate back / forth for easy loading and finished parts pick out, to increase productivity. • Rotary table with location pin, accurate positioning for mold alignment and automation. • Robot interface capability for complete automation. • Standardized wtih 2-sation function, and capable for 3-station or 4-station function & automation linkup for advanced efficiency. • Standardized wtih 3-column clamp, and available for 4-column clamp upon request.
Inflex-The Flexographic press built for compatibility
产品分类 : 柔版印刷机
Inflex ( The Flexographic press built for compatibility ) The Inflex printing machine can be placed in-line with any kind of converting equipment such as extruder, bag making, sheeter, die cutting…etc. If you are looking to add to your existing production line, this is the press for you to customize
电动射出机专用齿轮箱
产品分类 : 传动、电机与驱动系统
(1) 采用特殊之设计与制造方式，适合用于高扭矩、高转速之运转环境中。且运转时损耗少低噪音，能提供齿轮减速机较高之传动效率。 (2) 于输入轴(电动马达)与输出轴(连接驱动螺杆和料管)之间，采用三段减速设计。其输入轴与输出轴两者之间的距离空间，恰好正足以涵括马达、减速机箱体及连接螺杆和料管之完整系统配置嵌入其中。形成一U型外观设计，占用最小的空间，达到最大的空间使用效益。 (3) 齿轮元件之设计制作，采用AGMA标准(亦接受客户指定之DIN、JIS标准设计制作)，齿轮元件材料采用高品质之低碳合金钢(一般为SCM420等级之材质)制作。齿轮元件经渗碳热处理之后，再经由齿面研磨制程加工后，其精度等级可达AGMA10级以上，确保齿轮减速机运转时之低噪音、低损耗和高效率之特性。 (4) 马达法兰和驱动轴之设计制作，除本型录上之标准形式可供选择之外。亦可依据客户的需求，客制化设计制作，以达到TGSM齿轮减速机最广泛的适用性。