English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Utraflex / Utraflex-H-The UV-LED press
产品分类 : 柔版印刷机
The Ultraflex press is a UV-LED central impression press to provide high quality print with high opacity. At the same time Ultraflex press is an ecofriendly solution as UV-LED application does not emit VOCs. The Ultraflex-H is a hybrid press that integrates 3 technologies, the UV-LED ink application, solvent/water-based ink application and the central impression (CI). The Ultraflex-H enables you to take advantage of the UV-LED application but at the same time draw back to the solvent based or water-based print stations when needed If you are looking for a flexible, cost effective and production efficient press, the Ultraflex series is the press for you to customize.
LDPE Foam Tube&Rod Extrusion line
产品分类 : 管材与型材挤出生產线
LDPE Foam Tube&Rod Extrusion line : With proper mixing of melted resin & blowing agent, provides most homogeneous mixing. Accurate blowing agent injecting quantity and temperature control to stabilize the foaming process. High level safety control, system will be shut down automatically when extruder motor failure or high pressure.
齿轮联轴器
产品分类 : 传动、电机与驱动系统
(1) Crowned tooth allowed larger tolerance in shafts and higher loads. (2) Special hardening treatment W/high strength and anti-abrasiveness. (3) Closed type coupling--easy lubricate & anti dust as well as no leakage. (4) The type of TIEN YI GEAR SHAFTS COUPLINGS had been successful the first processing, it must be done the second procedure heat treating again according to material. And it were given them more rigidly precise, increasing stronger tenacity. At last removing gravitation by striking-ball bearing when those steps all finished.
PET拉伸吹瓶机系列-LM系列
产品分类 : 自动吹瓶机
全自动PET吹瓶机LM系列配有高速精密吹瓶阀，将空气回收转换为压力操作将减少空气消耗。从料斗转移到解扰器的瓶坯，按顺序自动输送到单个通道。缩短加热间距以减少能量浪费并提高加热效率。全自动PET吹瓶机LM系列采用连续集中加热方式，冷却坡道和吹气装置，有效隔离瓶胚颈部，避免瓶胚颈部因过热而变形。
EP 系列热熔胶封装射出机
产品分类 : 自动注塑机
● 创新设计转盘面积最小，容模尺寸最大● 可搭配柱塞式或螺杆式射出● 专利设计辅助进料系统，贮料跟卧式机一样精准● 两板直压式四缸锁模机构● 专利辐射式力学范本耐用30年● 安全光栅保护装置● 智慧程式控制系统让射出更容易● 相对同规格机型，机台高度低● 符合人体工学的工作台高度● 电脑控温气冷式油冷却系统● 精密节能油电伺服系统
原纤化带式挤出生产线（JC-FYB系列）
产品分类 : 长丝与纱线挤出生產线
The JC-FYB series Fibrillated Tape extrusion line is designed to produce fibrillated tape and heavy duty fibrillated tape for wide product range, such as baler twine, insulated cable filler, carpet backing, and other technical application such as synthetic grass.
JB-CD Latex Condom Dipping Machine
产品分类 : 橡胶浸渍机
Condom manufacturing machine process Collecting the raw materials Rubber latex is obtained from the milky fluid produced by various tropical plants. Latex is actually an emulsion or dispersion of tiny rubber particles in water, and ingredients added to the latex must be able to attach to the rubber particles during compounding. Compounding Next, chemical additives are mixed to form a paste. This paste is then blended with the liquid latex in a process called compounding. Storage The latex and chemical compound is then unloaded into drums for storage, where it remains for approximately seven days. During this period, vulcanization chemically strengthens the bonds of the rubber. The storage time also allows any air, which might have been trapped in the mixture during compounding, to escape. Dipping The compound is then added to the dipping or condom-forming machine. The dipping machine is a long, hooded machine approximately 100 feet (30.5 m) in length. Thick tempered glass rods move along a closed belt between two circular gears. The belt drags the rods, which are called mandrels, through a series of dips into the latex compound. The mandrels rotate to spread the latex evenly. Several coats are required to build the condom to its required thickness. Between each dip, the latex is hot air dried. After the final dipping and drying, the condoms automatically roll off the mandrels. A machine shapes and trims the ring of latex at the base of each condom. Tumbling Next, the condoms are put in a tumbling machine, where they are coated with talc or another similar powder to prevent the rubber from sticking to itself. Testing After a curing period of several days, the condoms are sampled by batch and tested for leaks and strength. The first such test is the inflation test, in which the condom is filled with air until it bursts. Condoms are required to stretch beyond 1.5 cubic feet, about the size of a watermelon, before bursting. This test is considered most important because the elasticity of the condom keeps it from tearing during inter-course. In the water-leakage test, the condom is filled with 10 ounces (300 ml) of water and inspected for pin-sized holes by rolling it along blotter paper. Condoms are also tested electronically. This involves mounting each condom on a charged stainless steel mandrel. The mandrel is passed over by a soft, conductive brush. If pin holes are present, a circuit will be established with the mandrel, and the machine will automatically reject the condom. Packaging Condoms that have successfully passed these tests are rolled by a machine. Rolling the condom makes it easier to package and use. Lubricant and spermicide may be applied by a metering pump just before the top wrap is added in the foiling process.
Primary Packaging - General Filling - AF-80
AF-80 liquid filling equipment common application is for above 60mL low viscosity liquid products such as collagen healthy drinks, mouthwash and etc. In order to meet customer’s various requirements, minor modification for the equipment is also applicable.
EMI SHIELDING
产品分类 : Industrial Parts & Safety Gear
Protect parts from electromagnetic interference. It is used to protect electrical signals from the outside world. Currently, construction methods for anti-EMI are electric plating, sputtering, spraying, electric paint, or the direct use of the shielding effect of metal materials, such as the use of stainless steel, aluminum, iron or aluminum-magnesium alloy, and other materials. The metal piece of masking is low cost and meets current environmental regulations. But the processing and assembly are complex and miscellaneous and are poor stability. Water electroplating, electric plating, conductive paint, and other environmental laws and regulations conflict or doubt, the establishment of the new plating plant is not easy in the future and will gradually be phased out and replaced. So far, workers using a vacuum sputtering process and the magnesium alloy should be the main way to effectively combat EMI.
AWS-PET塑料回收清洗线
在当前的循环经济中，PET瓶回收仍然是该行业的基石。即使原生材料价格波动，高效的PET瓶清洗生产线也能确保长期盈利。ACERETECH团队凭借数十年的全球经验，深耕塑料清洗生产线领域，致力于设计能够显著降低能源消耗，同时生产优质清洁PET碎片的系统。 凭借我们在塑料回收机械领域丰富的制造经验，我们将实际应用反馈融入到最新的PET瓶清洗生产线设计中。这种持续创新使我们能够提供先进的塑料碎片清洗系统，以最少的水和能源消耗，实现行业领先的纯度水平。 我们的PET回收解决方案针对大批量生产进行了优化，为客户提供高质量的瓶片，可用于食品级或纤维级应用。无论您是升级现有工厂还是投资新的塑料清洗生产线，ACERETECH的塑料碎片清洗系统都能通过降低运营成本和稳定生产来最大限度地提高您的投资回报率。
高速精密立式射出成型机-YQ系列
产品分类 : 立式注塑机
• Vertical four-pillar vertical clamping, with vertical injection. • The square pillar design comes with large mold size. The space within the column allows customers to install devices of automatic embedding and removing products. This allows automation for the whole machinery. • Big L / D ratio of screw, plasticizing evenly, suitable for injection molding of engineering plastics. • High standard computer control system with high precision injection pressure and high response injection speed. The quality is more stable for high-precision embedded injection molding products. • 1S single sliding: After mold opening, the lower mold will automatically slip in front of the operator for facilitating embedded molding operation. • 2S double sliding (Alternating double sliding): One mold for injection molding, another mold for taking out and putting on embedded parts operation. • 2SL double sliding (90°Alternating double sliding): One operator can operate independently. One mold for injection molding, another mold for material taking and putting on embedded parts. The two slidings are intersecting at 90 degrees, which can lower the production cost, and enhance the performance. • Able to combine automation and the high-speed injection can effectively enhance the production capacity. • A variety of circuit design (half closed servo hydraulic or high speed injection) to meet the customer’s requirements.
