Vertical Shuttle Table Injection Molding Machine

分类: 立式射出机

鑫野智动工业股份有限公司

国家: 台湾

电话: 886-3-321-8768

传真: 886-3-321-8769

联络人: 苏小姐

马上询问

Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding.
With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production.
High precision mold platen ( Parallelism / flatness : 0.02/100 mm), heavy duty tie-bars, and low pressure mold clamping work together to greatly extend machine & mold life.
Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance.
Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks.
All series adapted Variable pump +PQ valves enable energy savings of 30~50%.
Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life.
Low oil temperature, durable parts, high speed injection, and quiet operation.
Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine.
All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.

MODEL		K360-110-25DV-1			K410-180-40DV-1			K460-250-55DV-1			K520-360-80DV-1			K560-460-120DV-1			K660-760-160DV-1
Injection Unit
Screw Diameter	mm	22	28	34	26	32	40	31	38	44	35	40	45	40	45	50	45	50	55
Injection Pressure	kgf/cm²	2329	1438	975	2330	1538	984	2447	1629	1215	2286	1750	1383	2226	1759	1425	2191	1775	1467
Injection Capacity	cm³	46	74	109	74	113	176	106	159	213	173	226	286	226	286	353	350	432	522
Injection Weight (PS)	oz	1.5	2.5	3.6	2.5	3.8	5.9	3.5	5.3	7.1	5.8	7.5	9.5	7.5	9.5	11.8	11.7	14.4	17.4
Injection Weight (PS)	gram	43	70	103	70	106	166	100	150	201	164	214	270	214	270	334	330	408	494
Injection Rate	cc/s	37	60	89	61	92	144	74	111	149	99	130	164	154	195	241	158	195	236
Screw Stroke	mm	120			140			140			150			160			200
Nozzle Stroke	mm	180			180			180			180			180			180
Nozzle Contact Force	tf	3.8			3.8			3.8			3.8			3.8			3.8
Injection Speed	mm/sec	98			115			98			103			123			99
Screw Rotation Speed	rpm	0 ~ 180			0 ~ 180			0 ~ 180			0 ~ 180			0 ~ 150			0 ~ 150
Clamping Unit
Clamping Force	tf	25			40			55			80			120			160
Clamping Stroke	mm	200			200			200			200			250			250
Max. Mould Space	mm	400			400			400			400			500			500
Min. Mold Height	mm	200			200			200			200			250			250
Overall Size of Platens (H*V)	mm	500*290			560*300			620*400			700*570			790*590			920*720
Space Between Columns (H*V)	mm	360*150			410*150			460*240			520*385			560*360			660*460
Ejector Force	tf	0.7(2.7)			0.9(2.7)			1.7(2.7)			1.7(2.7)			2.7(2.7)			2.7(2.7)
Ejector Stroke	mm	25(60)			35(60)			40(100)			50(100)			60(100)			60(100)
Mold Transfer Unit
Type*		2S			2S			2S			2S			2S			2S
Moving Plate Stroke	mm	310			320			410			550			580			730
Size of Moving Plate (H*V / DIA)	mm	350*600			400*620			450*810			510*1100			550*1150			650*1450
Others
Drive Motor (with Variable pump)	kw(HP)	3.7(5HP)			5.5(7.5HP)			7.5(10HP)			7.5(10HP)			11.25(15HP)			11.25KW(15HP)
Heater	kw	3.4			5.6			6			7.5			9			11
System Pressure	kgf/cm²	140			140			140			140			140			140
Oil Tank Capacity	L	140			160			200			200			300			300
Dimension of Machine﹝LWH﹞	m	1.71.02.7			1.81.12.9			1.91.23.1			2.51.43.8			2.91.64.2			3.21.84.6
Weight of Machine	ton	1.2			1.7			2.3			4.2			5.5			7

Type*: 1S=Single Slide Table; 2S=Shuttle Table; R = Rotary Table; V=Fixed Planten

Vertical Shuttle Table Injection Molding Machine

相关产品

KC Series Vertical Injection Molding Machine (转盘型)

KT Series Injection Molding Machine (转盘型)

KC (STANDARD)