English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
| MODEL | KS-CFLL100+120T | KS-CFLL100+135T | |
| FEATURE | MATERIAL TO BE USED | LDPE LLPDPE HDPE EVA PP NYLON (CUSTOMRISED, PLEASE ADVISE MATERIAL) | |
| MAX. FILM WIDTH | 5000 mm | 6000 mm | |
| THICKNESS OF FILM | 0.02~0.25 m/m | ||
| MAX. EXTRUSION OUTPUT | 1000 kg/hr | 1100 kg/hr | |
| EXTRUDER | SCREW DIA. | 100 mm × 2 | 100 mm × 2 |
| 120 mm × 1 | 135 mm × 1 | ||
| SCREW L/D | 30 : 1 | 30 : 1 | |
| SCREW / CYLINDER MATERIAL | SACM 645 STEEL WITH HARD WITH NITROGEN TREATMENT, HARDNESS 75 OR OVER | ||
| CYLINDER COOLING | ½ HP × 14 | ½ HP × 16 | |
| DRIVING MOTOR | 150 HP × 2 200 HP × 1 |
150 HP × 2 250 HP × 1 |
|
| HEATER CAPACITY | 250 kw | 300 kw | |
| DIES (mm) | 1200 ø | 1350 ø | |
| TEMPERATURE CONTROL | 27 point | 30 point | |
| COOLING EQUIP | 20 HP | 25 HP | |
| TAKE-UP UNIT | TYPE | FIXED TYPE / OSCILLATING TYPE | |
| PINCH ROLLER (mm) | 270 ø × 3000L | 270 ø × 3500L | |
| TAKE-UP MOTOR | 5 HP | 7½ HP | |
| TAKE-UP SPEED (m/min) | 6 ~ 60 | 6 ~ 60 | |
| SUB-PINCH ROLLER (mm) | 165 ø × 3000L | 165 ø × 3500L | |
| GUIDE MOTOR | 75 kg/cm | 75 kg/cm | |
| WINDING UNIT | FWC TYPE | ONE STATION SURFACE WINDER WITH AUTOMATIC BOBBIN CHANGE | |
| EFFECTIVE WIDTH | 2800 mm | 3300 mm | |
| DIA. OF FILM WOUND-UP ROLL | 800 mm | 800 mm | |
| WINDER MOTOR | 5 HP | 7½ HP | |
| DIMENSION (L×W×H) (M) | 14×12×16 | 16×14×20 | |
| OPTIONAL DEVICE | Gravimetric Dosing Unit | Oscillating Take Up Unit | |
| IBC (Internal Bubble Cooing Computer Control System) | Line Speed Synchronized with Computer Control | ||
| Thickness Measurement | Two Stations Surface Winder | ||
| Thickness Controller | Chiller | ||
| Automatic Hopper Loader | Heat Slitting Device | ||
| Film Surface Treater | EPC (Edge Position Control) | ||
| Pressure Gauge | Electronic Tension Control | ||
| Rotary Die | Crane for Die and Air Shaft | ||
| Automatic Gauge Control with Automatic Cooling Ring | PIB Pump System (For LDPE/LLDPE) | ||
*Specifications are subject to change without notice for improvement.
5-7 muti-layer co-extrusion will be customerised according to the material to be used. The film specification that going to produce, and application of the film.
