Bag Printing Machine for PP woven bag

分类: PP编织袋印刷线

瑞隆机械工业股份有限公司

国家: 台湾

电话: 886-5-5511888

传真: 886-5-5571393

联络人: 何伟豪先生

马上询问

<1.Roll to Roll printing machine is the most efficient way for pp woven bag printing, and capable of two side printing on the bag in one process, based on the current market demand, we are able to Provide 12 colors Roll to Roll printing line>
2，我们的卷筒印刷机提供高质量的印刷和输出，只需要一个操作人员就可以降低印刷成本，即使油墨成本和电力成本，这是大量印刷袋子的最佳选择

模型	JLRPM-6800BO / 6C
处理管宽度	800mm（可最大）
打印宽度	800mm（可最大）
打印长度	600-1300mm
打印方法	0 + 6,1 + 5,2 + 4，3 + 3
生产	70M /分钟
颜色数量	6种颜色
调整打印位置	水平或垂直位置是可调的
＆nbsp;自动边缘位置控制	1个单位
加热器	1.8kw x 13烤箱驱动
鼓风机用于加热器	1 / 2HP×1单位，5HP×1单位
墨辊电机	1HP
风电机	AC 2HP x 1
＆nbsp;供布架	10公斤磁制动器自动张紧系统
日立自动吊架	1/2 HP x 1，1/4 HP x 1,1ton x 1
＆nbsp;主驱动电机	AC 7.5 HP
电力消耗	35千瓦
尺寸	8200 x 2200 x 3850毫米³
重量	8200公斤

The Ceramic Anilox Roller System

Flexographic printing controls ink volume through a ceramic anilox roller — a steel roller engraved with a microscopic cell pattern and coated with industrial ceramic for wear resistance. Each cell picks up a precise, metered amount of ink from the ink tray and transfers it to the printing plate at a consistent volume, regardless of press speed. The cell count (lines per centimeter) and cell volume determine how much ink is laid down, allowing printers to dial in the correct ink film weight for each color without adjusting press pressure. The JLRPM-6800BO/6C uses one dedicated ceramic anilox roller per color station across all six stations.

Inter-Color Drying and Print Registration

Printing multiple colors in sequence requires each ink layer to dry before the next station applies ink on top of it — otherwise colors bleed and mix at the surface. The JLRPM-6800BO/6C includes an inter-color drying system between each of its six stations, ensuring the previous color is set before the web enters the next print nip. Print registration — the precise alignment of each color relative to the others — is maintained through servo-driven tension control on the web path. The machine supports four configuration modes (0+6, 1+5, 2+4, 3+3) to print on one or both sides of the PP fabric in a single pass at speeds up to 100 meters per minute.