PRM-TAIWAN-塑胶机械与橡胶机械入口网

ISOTHANE FR系列 - 防火級

分类: 塑化产品
国家: 台湾
电话: 886-4-23587676
传真: 886-4-23587575
联络人: 施先生
马上询问

ISOTHANE TPU树脂:

 

创新高性能丶高附加价值之绿色环保材料
   大东树脂掌握关键技术,自行研发的高性能热塑型聚氨酯弹性体,简称TPU树脂,为高级环保材料,可於土中自然分解,是优异的环保材料。具备耐磨损丶耐撕裂丶及耐低温曲折等特性。大东树脂TPU树脂系统发展完整,分为芳香族与脂肪族两大类。
  未来轻量化与节能减碳的趋势,也成功推出以塑代钢的热塑性长纤维增强复合材料及客制化规格的树脂与复合材料等。
  大东树脂推出的长纤维增强复合材料(LFRT)具有优异的刚性强度及耐冲击特性, 可取代工业零部件的金属材料,有效减轻产品重量,且成型品表面具有良好光泽度及平滑性 ,耐磨耗性及尺寸安定性也较一般复合材料更佳 。
  塑化产品生产线全程使用电脑自动化程序控制,采用先进的双轴反应押出设备产制高性能材料,并透过精密检验仪器之检测及自动化设备之包装堆栈,确保成品外观及储存品质。

ISOTHANE FR系列 - 防火級

项目名称 ISOTHANE FR系列 - 防火级
产品特性 适用于押膜、押管及射出用途。
应用场合 电器、电线、电缆、及建材。
项目名称 防火級
Description ISOTHANE 8800 series products have good initial adhesive strength, fast crystallization, good solubility, good washing durability and freezing resistance etc.. Viscosity ranges from 150~2800cps (15% MEK Solution), and viscosity could be customized for different viscosity. They exhibit good adhesive with TPU, PVC, polyester fabric, leather and other materials.
Supply and Storage ISOTHANE TPU resins are supplied in pellet form packed in 25kg moisture proof bags. All TPU resins have been dried before packing. ISOTHANE TPU resins should be stored in cool and dry environment in their original containers until be used. Storage temperature should not exceed 30°C. If only a portion of TPU resins was used from a bag, the remainder of TPU resins should be tightly closed.
Drying
TPU resins are hygroscopic and pre-drying of TPU resins is always a necessary step before processing. Depend on the climate, the granule exposed to the atmosphere will absorb moisture very quickly. The moisture might bring about partial degradation of polymers and the formation of bubbles or streaks in the molded and extruded parts. In order to ensure the efficient and successful processing into quality parts, the moisture content in TPU resins is recommended less than 0.02%.

A desiccant-bed-type hopper dryer is recommended for drying ISOTHANE TPU. The dew point of the inlet air should be in the range of -30 to -40°C. About the recommended drying conditions, please view ISOTHANE individual data sheets.
Processing - Extrusion
Barrel and Motor
  • High torque drive capacity at low speed
  • Vented or standard barrels acceptable
Screw
  • Compression ratios between 2:1 and 3:1
  • Minimum L/D of 30/1
Feed Throat
  • Vertical and tangential
  • Water cooling is recommended
Screen Pack
  • Streamlined breaker plates with screen packing is recommended
  • Typical 40/80/80/40 mesh screens
Die
  • Streamline with good temperature control
  • Land Length is generally 10 to 15 times the part thickness
  • Coat-hanger manifold-type dies are recommended for extruding film and sheet
  • Crosshead dies are recommended for wire, cable and hose jacketing
  • Side-fed rotating dies are recommended for blown film
About the recommended extrusion temperatures, please view ISOTHANE individual data sheets.
Processing - Injection Molding
Barrel and Motor
  • High torque drive capacity at low speed
  • Vented or standard barrels acceptable
Screw
  • Compression ratios between 2:1 and 3:1
  • Metering screw with gradual transition zone
Injection Pressure
  • Typical 6,000 to 15,000 psi
  • Hold pressure 60 – 70% of forward time
Injection speed
  • Slow to moderate
  • Depends on gating, wall section and flow length
About the recommended injection molding temperatures, please view ISOTHANE individual data sheets.
Coloring
Generally, ISOTHANE TPU resins are supplied in their natural color. They can be colored by blending with pigment or pigment master batch. Using master batch based on TPU is recommended. Other master batch based on polyethylene or polystyrene is suitable to a limited extent. All colorants employed in TPU resins must be pre-dried before processing.

The normal addition of pigment or pigment master batch is 0.2%-0.5% or 1-3%.
Additives Various additives can be used to enhanced the properties of ISOTHANE TPU resins, e.g. anti-blocking agents, antioxidant, UV stabilizers or release agents. Most additives supplied as master batches are available. But not all additives are compatible with ISOTHANE TPU resins. It is recommended to inquire of your suppliers or our technical service before compounding.
Recycling
For ISOTHANE TPU resins, up to 20% of regrind may be recycled with virgin material depending on finished parts requirements. The regrind material has to be kept free of contamination, diced and dried before re-using. The material which has been contaminated, discolored or degraded is not suitable for recycling. TPU resins may decrease desired properties, e.g. hardness and mechanical properties, due to improperly mixing with regrind.
Regulatory or testing organizations (e.g., UL) may have specific requirements limiting the allowance amount of regrind. Certain quality requirements laid down in specifications may exclude the use of regrind material.
Healthy and Safety Information Before working with these products, it is essential that all operators are aware of the healthy and safety precautions. ISOTHANE TPU resins can be processed or machined over a wide range of temperature. There can be some smoke formation during processing. The smoke that contains some decomposition substances of TPU or additives may cause irritation to human body. Generally, the temperature does not exceed 240°C that can reduce decomposition formation. An effective extraction system, especially in the melt outlet zone, is necessary. The detail information concerning healthy and safety can be available in safety data sheets (SDS) or contact our technical service.
Disposal ISOTHANE TPU resins present no hazard to the environment or water. They can be dumped on municipal landfill or in a waste incineration plant. The official regulations on waste disposal should be observed.
项目 单位 ASTM Polyester FR-TPU
1085A-FR 1085A-FRT 1090A-FR
比重   D-792 1.18 1.20 1.20
硬度 Shore A D-2240 84A 85A 90A
抗張强度 MPa
psi
D-412 32
4,620
36
5,260
35
5,120
@ 50% 延伸率 MPa
psi
D-412 4
570
4
570
8
1,140
@ 100% 延伸率 MPa
psi
5
780
5
710
9
1,280
@ 300% 延伸率 MPa
psi
11
1,560
10
1,420
14
2,000
断裂延伸率 % D-412 610 600 600
撕裂强度 N/mm
lb/in
D-624
DIE C
110
620
110
620
150
840
防火 - UL-94 V-0 V-0 V-0
外观 - - White Transparent White
项目 单位 ASTM Polyether FR-TPU
3080A-FR 3085A-FR 3085A-FRT 3085A-FRC 3090A-FR 3095A-FR
比重   D-792 1.15 1.15 1.18 1.20 1.15 1.18
硬度 Shore A D-2240 80A 85A 84A 85A 91A 94A
抗張强度 MPa
psi
D-412 20
2,920
29
4,270
33
4,840
15
2,130
30
4,400
25
3,560
@ 50% 延伸率 MPa
psi
D-412 4
640
6
850
4
640
6
920
10
1,420
10
1,500
@ 100% 延伸率 MPa
psi
6
850
8
1,140
6
850
7
1,070
12
1,710
12
1,710
@ 300% 延伸率 MPa
psi
10
1,420
13
1,850
11
1,560
9
1,280
19
2,770
19
2,700
断裂延伸率 % D-412 610 570 700 710 480 400
撕裂强度 N/mm
lb/in
D-624
DIE C
93
530
130
730
120
670
110
620
133
750
130
730
防火 - UL-94 V-0 V-0 V-0 V-0 V-0 V-0
外观 - - White White Transparent White White White
上表所列数据数据仅供参考