C Type Injection Molding Machine | PRM 塑胶机械采购平台

分类: 立式射出机

鑫野智动工业股份有限公司

国家: 台湾

电话: 886-3-321-8768

传真: 886-3-321-8769

联络人: 苏小姐

马上询问

Tie-bar less (C type) design gives more space for operation. Especially suitable for the power cord and connector with wire.
With double slide table or rotary design, put in, takeout products and molding finish at the same time, which is more safe and efficient for production , thus reduce the cost of production.
High precision mold platen ( Parallelism/ flatness : 0.01/100 mm), heavy duty tie bars, and low pressure mold clamping work together to greatly extend machine & mold life.
Nitrite and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance.
Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks.
All series adapted Variable pump +PQ valves enable energy savings of 30~50%.
Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life.
Low oil temperature, durable parts, high speed injection, and quiet operation.
Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine.
All machine with compact , space-saving design, resolve the floor space shortage problem of factory.
Material injected through parting line to cavities.

MODEL		K110-20DC-2				K170-28DC-2				K250-40DC-2				K500-60DC-2				K500-80DC-2
Injection Unit
Screw Diameter	mm	24	28		34	28	32		38	31	38		44	36	44		50	36	44		50
Injection Pressure	kgf/cm²	2333	1714		1163	2321	1777		1260	2447	1629		1215	2463	1649		1277	2463	1649		1277
Injection Capacity	cm³	50	68		100	74	96		136	106	159		213	203	304		393	203	304		393
Injection Weight (PS)	oz	1.7	2.3		3.3	2.5	3.2		4.5	3.5	5.3		7.1	6.8	10.1		13.1	6.8	10.1		13.1
Injection Weight (PS)	gram	47	64		94	70	91		129	100	150		201	192	287		371	192	287		371
Injection Rate	cc/s.	37	51		75	61	80		113	58	87		117	74	110		142	74	110		142
Screw Stroke	mm	110				120				140				200				200
Nozzle Stroke	mm	150				150				150				150				150
Nozzle Contact Force	tf	2				2				2				3.3				3.3
Injection Speed	mm/sec	82				99				77				72				72
Screw Rotation Speed	rpm	0 ~ 180				0 ~ 180				0 ~ 180				0 ~ 180				0 ~ 150
Clamping Unit
Clamping Force	tf	20				28				40				60				80
Clamping Stroke	mm	155				155				155				175				175
Max. Mould Space	mm	305				353				367				372				372
Min. Mold Height	mm	150				198				212				197				197
Overall Size of Platens (H*V)	mm	340*230				400*230				400*250				450*280				550*300
Space Between Columns (H*V)	mm	-				-				-				-				-
Ejector Force	tf	2.7				2.7				2.7				2.7				2.7
Ejector Stroke	mm	40				40				40(100)				40				40
Mold Transfer Unit
Type*		2S		R		2S		R		2S		R		2S		R		2S		R
Moving Table Stroke	mm	400				510				510				550				650
Sizing of Moving Table (H*V/DIA)	mm	750*230		∅600		920*230		∅780		920*230		∅880		1000*280		∅980		1200*300		∅1200
Moving
Drive Motor (with Variable pump)	kw(HP)	3.7(5HP)				5.5 (7.5HP)				6.8(8HP)				9(12HP)				9(12HP)
Heater	kw	4.9				5.5				6				10.4				10.4
System Pressure	kgf/cm²	140				140				140				140				140
Oil Tank Capacity	L	100				150				150				200				200
Dimension of Machine ﹝LWH﹞	m	1.8 * 0.8 * 1.6	1.8 * 1.0 * 1.6		2.0 * 1.0 * 1.6	2.1 * 0.9 * 1.6	2.1 * 1.1 * 1.6		2.6 * 1.7 * 1.6	2.4 * 1.0 * 1.7	2.4 * 1.5 * 1.7		2.7 * 1.2 * 1.7	2.6 * 1.1 * 1.9	2.6 * 1.3 * 1.9		3.0 * 1.4 * 1.9	2.7 * 1.2 * 2.0	2.7 * 1.4 * 2.0		3.4 * 1.5 * 2.0
Weight of Machine	ton	2	2.2		2.4	2.4	2.6		3	2.6	2.9		3.5	3.5	3.8		4.5	4	4.5		6

Type*: 1S=Single Slide Table; 2S=Shuttle Table; R = Rotary Table; V=Fixed Planten