2RT开模轮胎胶囊专用橡胶射出成型机IRH-S2
产品分类 : 橡胶注射成型机
Mold opening design The 2RT surpasses the traditional top opening mold that can be used for the double or triple molds with the design of the opening mold and pushing out the mold in the between. T...
2RT开模轮胎胶囊专用橡胶后射式成型机
产品分类 : 橡胶注射成型机
2RT超越了传统的顶部开模,可用于双模或三模,并具有开模的设计并在两者之间推出模具。可以通过软件调整开模,并分别打开,分开推开模具,连续打开和连续推开模具。
CE认证橡胶射出成型机IRH(CE type)
产品分类 : 橡胶注射成型机
Material supply system A special design of two-stage material supply is adopted. It expels bubbles out of the raw material in the most effective way and there is no dead material.
2RT 开模橡矽胶真空热压成型机VCC-D2
产品分类 : 压缩成型机
●这种机器是多功能,因为它适合用于顶部打开双重或三重模具。 ●采用双重权力和个别石油系统。每个油系统分别设计。它是稳定,安静和低频率的故障。两个轴可以操作同时。 ●慢提供模具校准的速度,使校准更安全,更...
冷浇道橡胶射出成型机
产品分类 : 橡胶注射成型机
3站式3RT开模橡矽胶热压成型机/HCC-T3
产品分类 : 压缩成型机
Features This type of machine is multi-functional, because it is suitable to be used for top opening triple or four molds. Hydraulic system Designed by proportional pressure and flow ratio, which i...
CE认证真空热压成型机/VCC(CE-TYPE)
产品分类 : 压缩成型机
产品特性安全设计备有高科技红外线安全电眼,并具有全自动警告系统及多重安全防护装置,可清楚掌握机台状况,确保安全。真空能力真空度高,采平均抽法,可便品稳定,提高品质及产能。掀模设计特殊掀模机构设计,...
专利轨道开模橡矽胶热压成型机/ HCC-DP
产品分类 : 压缩成型机
产品特性开模设计专利设计之新型轨道开模,掀模角度可达90度,方便人员操作。换模具时,不需将轨道开模座卸下,即可轻松完成。大幅提升工作效率及安全性。掀模设计特殊掀模机构设计,耐用寿命长,出入模安静、快...
Two Roll Mixing Mill (Open Mill)
产品分类 : 橡胶搅拌机
The Two Roll Mixing Mill For Rubber、Plastic、PVC、EVA To Heating、Mixing And Chemicals Or Sulfur Material Uniformity It Can Be As Instead Of The Calender To Produce Un-Exact Rough Sheet Process.
Kneader Ruder (DAKE-Series)
产品分类 : 分散捏合机
The Open Kneader With Ruder Is Available With a「Variety Of Blades In Different Shape Design As Well As With Number Of Discharge Methods And Mixing Conditions」, Has Already Achieved Applications C...
4RT开模骨架油封专用橡矽胶真空热压成型机VOCC-D3W
产品分类 : 压缩成型机
机体设计机体采用钢板组合,适合各种油封生产。出入模设计出入模框有装上耐磨片,可长期进出使用,定位准确。真空室设计真空闸门开关顺畅、安静、密封性好,真空度高。油箱设计具六种开模之动作模式选择,绝对能...
Scraping High Viscosity Vacuum Mixer
产品分类 : 压延机/混合机
Application of high viscosity materials, make use of mixing, the use of forward and reverse stirring, so that a variety of materials in a stirred tank, can be mixed evenly. This machine is equip...
LIM、LSR立式液态硅胶机(转盘/滑模)
产品分类 : 硅胶注塑机
● Precision vertical clamping system (parallelism/ flatness : 0.02/100mm) , heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend machine & mold life. ● Increased ...
橡胶促进剂或添加剂造粒生产线
产品分类 : 橡胶回收机
JKH不只是处理塑料加工。我们也可以造粒橡胶和许多其他不同类型的材料。 JKH橡胶/添加剂复合造粒生产线是满足您所有橡胶/复合造粒要求的机器。我们也可以为您提供自动化生产线,并根据您的需求调整和定制设备。