English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Semi-Automatic Packaging - Filling - CSL-F
CSL-F liquid filling equipment is semi-automatic liquid level filler for low viscosity liquid.
电动射出机专用齿轮箱
产品分类 : 传动、电机与驱动系统
(1) 采用特殊之设计与制造方式，适合用于高扭矩、高转速之运转环境中。且运转时损耗少低噪音，能提供齿轮减速机较高之传动效率。 (2) 于输入轴(电动马达)与输出轴(连接驱动螺杆和料管)之间，采用三段减速设计。其输入轴与输出轴两者之间的距离空间，恰好正足以涵括马达、减速机箱体及连接螺杆和料管之完整系统配置嵌入其中。形成一U型外观设计，占用最小的空间，达到最大的空间使用效益。 (3) 齿轮元件之设计制作，采用AGMA标准(亦接受客户指定之DIN、JIS标准设计制作)，齿轮元件材料采用高品质之低碳合金钢(一般为SCM420等级之材质)制作。齿轮元件经渗碳热处理之后，再经由齿面研磨制程加工后，其精度等级可达AGMA10级以上，确保齿轮减速机运转时之低噪音、低损耗和高效率之特性。 (4) 马达法兰和驱动轴之设计制作，除本型录上之标准形式可供选择之外。亦可依据客户的需求，客制化设计制作，以达到TGSM齿轮减速机最广泛的适用性。
ITO FILM自动送料切片机AFC-700
产品分类 : 切割机
Special feeder mechanism will not cause scrape or daamge to materials, to ensure 100% productivity of stisfactory products. Feed length and feed speed can be programmed to suit different properties of materials, so it has high flexibility in production. Simple and easy operation interface with touch-control monitor to expedite personnel training. Automatic recoiling mechanism, with the design of electronic control, to enable one-man one-machine operation. Feeder with servo control to ensure accurate feeding dimensions, and take precise control of material costs.
XPS Extrusion Line
产品分类 : 薄膜和片材挤出生产线
XPS Extrusion Line Features : With proper mixing of melted resin & blowing agent, provides most homogeneous mixing. Accurate blowing agent injecting quantity and temperature control to stabilize the foaming process. High level safety control, system will be shut down automatically when extruder motor failure or high pressure.
Nitrile And Latex Glove Dipping And Coating Machine-JB-SUB
产品分类 : 橡胶浸渍机
1.The machine use continues moving chain which can produce high capacity and low cost glove. 2.Keep dipping level in balance and adjust dipping length automatically. 3.The molds arrange in tight that save lots of oven space 4.Hot air cycle system to make temperature in oven is even 5.The machine has collect system that can reuse the redundant latex 6.Install a whole row molds that can change the mold by row easily which will not affect the production capacity.
一步法射出吹气成型机FS-BT
产品分类 : 注塑中空成型机
FS-BT-S采用2站式伺服旋转台及侧吹系统之设计:在射出瓶胚后,伺服旋转台转向180度,由伺服螺杆将瓶胚口模移至恻吹区吹塑成型。使用侧吹系统之设计,节省并增加生产空间,让瓶胚剪尾装置及成品输送可以架在机台内部,达到完全自动生产。此机种适用于短时间内生产小瓶子。 FS-BT-J也适用于生产宽口瓶此机种和FS-BT-S有等同的生产优点,但是适用于生产宽口瓶此机种之结构较大、较高之射出量及较强之锁模力。采用2站式之机台设计是镀塞之创新设计,FS-BT-S/FS-BT-J仅需较少的瓶口模穴、较低模具成本和更有弹性之模板空间,节省成本。当生产多样的产品时,模具成本是重要的投资成本。银塞射吹设计是简化和创新之生产设计,相对降低成本。
Secondary Packaging - Cartoning - CSC-50A
产品分类 : 装盒机
The cartoning equipment applies the vertical automatic production operation. The equipment is suitable for more types with medium capacity products