PRM-TAIWAN

Parts and Components

Products
View More :
Pump Unit
Pump Unit

Categories : Pumps

The hydraulic pump ensures tight and stable die clamping and allows the system to maintain clamping pressure on the mold even when there is a power failure or air pressure drops. The PCB Fine Pierc...

Screws And Barrels For Plastic Injection Molding
Screws And Barrels For Plastic Injection Molding

Categories : Screws and Barrels

Nan Yun's injection molding screw design team is able to provide ideal screw solutions for injection molding screw application. As the largest screw and barrel manufacture in Taiwan, Nan ...

TR Rotating Clamps
TR Rotating Clamps

Categories : Mold Parts

The TR system uses a hydraulic mechanism with a 90° turning movement to lock molds and dies into position. This heavy duty Clamping System is available in three different models with a clamping...

Screws and Barrels for Waste Plastic Recycling Pelletizing Machine
Screws and Barrels for Waste Plastic Recycling Pelletizing Machine

Categories : Screws and Barrels

●  Wear-resistant,high mixer,production increased,life span extended ●  Cautious process procedures ●  Design of advanced extrusion by net pressure ●  Design of advanced and hig...

Screws and Barrels for Twin Screw Extruders
Screws and Barrels for Twin Screw Extruders

Categories : Screws and Barrels

+For various waste materials recycling pelletizing. +Made of SACM-645 steel through strict & precise process procedure with reliable quality.

Blown Film Bubble Cage/Basket
Blown Film Bubble Cage/Basket

Categories : Blown Film Extruder Parts

Blown Film Extrusion Machine is a process that extrudes the molten polymer through Blown Film Die Head to process the plastic film. If the bubble tube is unstable when it first comes out from the D...

Co-Rotating Twin-Screw Extruder Screws / Barrels
Co-Rotating Twin-Screw Extruder Screws / Barrels

Categories : Screws and Barrels

The screw and barrel Nan Yun designes and manufactures for twin-screw extruder enables the continuous production of highly homogeneous and finely structured products, with more than 20 years of exp...

Air Pressing Stabilizer
Air Pressing Stabilizer

Categories : Flexo Printing Parts

Air pressing stabilizer is used to control the wheel movement of air and stablizing the film flow.

TY Die Clamp
TY Die Clamp

Categories : Mold Parts

As this lever-type clamp does not require a U-slot on the die shoe it can be used in a wide range of applications. The TY type Die Clamps are machined to fit into the T-slot of the bolster for extr...

Screw, Barrel & Gear Box for Two-Stage / Multi-Stage Waste Recycling Machine (Side Feeding + Main Machine + Vice Machine)
Screw, Barrel & Gear Box for Two-Stage / Multi-Stage Waste Recycling Machine (Side Feeding + Main Machine + Vice Machine)

Categories : Screws and Barrels

+For various waste materials recycling pelletizing. +To be made of SACM-645 steel through strict & precise process procedure with reliable quality.

High Mixing Screws for Injection Molding Machines
High Mixing Screws for Injection Molding Machines

Categories : Screws and Barrels

+Suitable for all kinds of resins, such as PP, PE, PC, AB and industrial plastic...etc. +To shorten material carried distance with high production & equal color mixture.

Insulation Plus Ceramic Band Heaters
Insulation Plus Ceramic Band Heaters

Categories : Heating Equipment

Saving in energy up to 30 % Reduced wattage of heater More uniform heating Less down time increases productivity Reduced preheating time of machine Heater cost is recovered in shorter time Cool wor...

Dr. Blade System
Dr. Blade System

Categories : Flexo Printing Parts

Dr. Blade system is close with Ceramic Anilox Roller, the blade will scrape off extra ink and make the ink balance on ceramic anilox roller.

COUNTER-ROTATING TWIN-SCREW AND BARREL FOR PVC EXTRUSION
COUNTER-ROTATING TWIN-SCREW AND BARREL FOR PVC EXTRUSION

Categories : Screws and Barrels

Nan Yun is one of most experienced screw and barrel design and manufacturer in Taiwan, who are manufacturing a wide array of PVC extruder Screw and Barrel which is the essential part of PVC extrusi...

Single Layer Blown Film Extruder
Single Layer Blown Film Extruder

Categories : Blown Film Extruder Parts

Single Layer Extruder is a commonly used type which HSIN LONG has rich manufacturing experiences. It is available for customers to choose the suitable collocation of components to meet their requir...

Ceramic Band Heater
Ceramic Band Heater

Categories : Heating Equipment

ARICO|Customed Ceramic Band Heater Manufacturer Arico is a global customed Ceramic Band Heater manufacturer and supplier, dedicated to improving the thermal insulation, energy saving, service life...

High Mixing Screws & Barrels for Injection Molding Machines
High Mixing Screws & Barrels for Injection Molding Machines

Categories : Screws and Barrels

Made of high-class special steel material. The plain material is treated by thermal process. The latest precise processing main machine. Designing and processing of the product's properties. Th...

Single Layer Die Head for HDPE or LDPE or PP
Single Layer Die Head for HDPE or LDPE or PP

Categories : Mold Parts

+Suitable for HDPE, LDPE & LLDPE Blown Film Machine. +Low pressure and spiral design provide high stability & high production. +All steel is made of Japanese SCM-440 through strict &...

Anti-Leakage Vacuum-PSY
Anti-Leakage Vacuum-PSY

Categories : Valves

The PSY Anti-overflow vacuum seat from Sino-Alloy is designed for plastic or rubber, food or pharmaceutical processes. It’s an important accessory to the PSM extruder.

Bi-metallic Screws and Barrels
Bi-metallic Screws and Barrels

Categories : Screws and Barrels

Over Welding of nickel based alloy on top of the thread surface (screw) and internal diameter (barrel). +Evenly hardened surface with 2mm thickness. +Hardness will not decrease under normal tempera...

TS Swing Type Clamps
TS Swing Type Clamps

Categories : Mold Parts

This system is hydraulically controlled and uses a swing motion to lock the dies or plates in place once it is positioned. It offers very secure clamping and is available in three different models.

Electronic Brake
Electronic Brake

Categories : Flexo Printing Parts

The Electronic Brake is from Italy, Europe, which used on the unwind system to slow down the speed to control web tension.

Tax Pneumatic Clamps
Tax Pneumatic Clamps

Categories : Mold Parts

The TAX system uses an automatic pneumatic pressure mechanism to individually clamp upper dies. This system is well suited for both smaller and larger hydraulic presses.