TX Die Clamp
Categories : Mold Parts
This compact, space saving, piston type clamp requires U-slots on the die shoe. The clamp leg is machined to fit the T-slot on the bolster. With the TX Die Clamp automatic slide model remote contro...
Independent Motor
Categories : Flexo Printing Parts
When machine is not run, the independent motor is able to select any rubble roller rotating for preventing ink drying.
EPC - Multidegree
Categories : Flexo Printing Parts
The Edge Position Control (Multi degree) is from Italy, Europe, which can automatic control the edge to the right position by multi-degree moving.
Air Cooled Ceramic Band Heaters
Categories : Heating Equipment
To heat and cool the barrel Low maintenance Easy replacement Improves quality of finished products Space saving Increases productivity Available with various diameter, length, voltage, wattage and ...
Co-Rotating Twin-Screw Extruder Screws / Barrels
Categories : Screws and Barrels
The screw and barrel Nan Yun designes and manufactures for twin-screw extruder enables the continuous production of highly homogeneous and finely structured products, with more than 20 years of exp...
TY Die Clamp
Categories : Mold Parts
As this lever-type clamp does not require a U-slot on the die shoe it can be used in a wide range of applications. The TY type Die Clamps are machined to fit into the T-slot of the bolster for extr...
Air Pressing Stabilizer
Categories : Flexo Printing Parts
Air pressing stabilizer is used to control the wheel movement of air and stablizing the film flow.
Insulation Plus Ceramic Band Heaters
Categories : Heating Equipment
Saving in energy up to 30 % Reduced wattage of heater More uniform heating Less down time increases productivity Reduced preheating time of machine Heater cost is recovered in shorter time Cool wor...
Blown Film Bubble Cage/Basket
Categories : Blown Film Extruder Parts
Blown Film Extrusion Machine is a process that extrudes the molten polymer through Blown Film Die Head to process the plastic film. If the bubble tube is unstable when it first comes out from the D...
TR Rotating Clamps
Categories : Mold Parts
The TR system uses a hydraulic mechanism with a 90° turning movement to lock molds and dies into position. This heavy duty Clamping System is available in three different models with a clamping...
Storage Tank with Blowing-PSP
Categories : Parts and Components
The PSP series storage tank with blower is Sino-Alloy’s solution for the final storage of the rubber or plastic pellets.
DL Die Lifter (Roller Type)
Categories : Mold Parts
The Quick Die Change System caters for a variety of different Die Lifters which allow for simple and quick movement of dies on a press bed. Forwell supplies two different types of Die Lifters accor...
Blown Film Take-Up Unit
Categories : Blown Film Extruder Parts
HSIN LONG Setting in the highest part of Plastic Film Blowing Machine, the most classic type of Take-Up Unit is suit for most Blown Film Machines. Different with the Oscillating Haul-Off, the volu...
Pressure Clamps
Categories : Mold Parts
This pneumatic type clamp is fixed on plate, unified die/mold dimensions are required. Mainly used in clean room.
COUNTER-ROTATING TWIN-SCREW AND BARREL FOR PVC EXTRUSION
Categories : Screws and Barrels
Nan Yun is one of most experienced screw and barrel design and manufacturer in Taiwan, who are manufacturing a wide array of PVC extruder Screw and Barrel which is the essential part of PVC extrusi...
Screw, Barrel & Gear Box for Two-Stage / Multi-Stage Waste Recycling Machine (Side Feeding + Main Machine + Vice Machine)
Categories : Screws and Barrels
+For various waste materials recycling pelletizing. +To be made of SACM-645 steel through strict & precise process procedure with reliable quality.
Thermocouples
Categories : Heating Equipment
Others ProductsARICO - The Best Solution Of Others Products ARICO Technology and worldwide's rubber and plastic injection industry manufacturers have cultivated a long and stable co-operation r...
Power Unit
Categories : Mold Parts
The power unit powers the hydraulic pump which keeps the die clamps in place. This power unit is self-contained and it yields enough hydraulic power to suit the toughest clamping requirements. Furt...
High Mixing Screws for Injection Molding Machines
Categories : Screws and Barrels
+Suitable for all kinds of resins, such as PP, PE, PC, AB and industrial plastic...etc. +To shorten material carried distance with high production & equal color mixture.
Stacked & Multilayer Type Die Heads
Categories : Mold Parts
+For all kinds of blown film machines and it is suitable for multi-layer products. +The stacked design provides high stability & good quality.
Screws And Barrels For Plastic Injection Molding
Categories : Screws and Barrels
Nan Yun's injection molding screw design team is able to provide ideal screw solutions for injection molding screw application. As the largest screw and barrel manufacture in Taiwan, Nan ...
Screws and Barrels for Twin Screw Extruders
Categories : Screws and Barrels
+For various waste materials recycling pelletizing. +Made of SACM-645 steel through strict & precise process procedure with reliable quality.